scholarly journals Circuit Performance Degradation of Sample-and-Hold Amplifier Due to Gate-Oxide Overstress in a 130-nm CMOS Process

2006 ◽  
Author(s):  
Jung-sheng Chen ◽  
Ming-dou Ker
Keyword(s):  
Gate Oxide ◽  
Performance Degradation ◽  
Cmos Process ◽  
Circuit Performance ◽  
Sample And Hold

High Temperature Reliability Investigations up to 350 °C of Gate Oxide Capacitors realized in a Silicon-on-Insulator CMOS-Technology

2013 ◽  
Vol 2013 (HITEN) ◽  
pp. 000116-000121
Author(s):  
K. Grella ◽  
S. Dreiner ◽  
H. Vogt ◽  
U. Paschen
Keyword(s):  
High Temperature ◽  
Dielectric Breakdown ◽  
Gate Oxide ◽  
Oxide Thickness ◽  
Cmos Technology ◽  
Silicon On Insulator ◽  
Cmos Process ◽  
Oxide Breakdown ◽  
Time Dependent Dielectric Breakdown ◽  
Single Poly Eeprom

Standard Bulk-CMOS-technology targets use-temperatures of not more than 175 °C. With Silicon-on-Insulator-technologies (SOI), digital and analog circuitry is possible up to 250 °C and even more, but performance and reliability are strongly affected at these high temperatures. One of the main critical factors is the gate oxide quality and its reliability. In this paper, we present a study of gate oxide capacitor time-dependent dielectric breakdown (TDDB) measurements at temperatures up to 350 °C. The experiments were carried out on gate oxide capacitor structures which were realized in the Fraunhofer 1.0 μm SOI-CMOS process. This technology is based on 200 mm wafers and features, among others, three layers of tungsten metallization with excellent reliability concerning electromigration, voltage independent capacitors, high resistance resistors, and single-poly-EEPROM cells. The gate oxide thickness is 40 nm. Using the data of the TDDB-measurements, the behavior of field and temperature acceleration parameters at temperatures up to 350 °C was evaluated. For a more detailed investigation, the current evolution in time was also studied. An analysis of the oxide breakdown conditions, in particular the field and temperature dependence of the charge to breakdown and the current just before breakdown, completes the study. The presented data provide important information about accelerated oxide reliability testing beyond 250 °C, and make it possible to quickly evaluate the reliability of high temperature CMOS-technologies at use-temperature.

Leakage Reduction of P-Type Logic Circuits Using Pass-Transistor Adiabatic Logic with PMOS Pull-up Configuration

2010 ◽  
Vol 39 ◽  
pp. 73-78 ◽  
Author(s):  
Jin Tao Jiang ◽  
Li Fang Ye ◽  
Jian Ping Hu
Keyword(s):  
Gate Oxide ◽  
Cmos Process ◽  
Oxide Materials ◽  
Gate Leakage ◽  
Leakage Reduction ◽  
Nanometer Cmos ◽  
Benchmark Circuit ◽  
Adiabatic Logic ◽  
Pass Transistor ◽  
Cmos Processes

Leakage power reduction is extremely important in the design of nano-circuits. Gate leakage has become a significant component in currently used nanometer CMOS processes with gate oxide structure. The structure and operation of the PAL-2P (pass-transistor adiabatic logic with PMOS pull-up configuration) circuits that consist mostly of PMOS transistors are complementary to PAL-2N (pass-transistor adiabatic logic with NMOS pull-down configuration) ones that consist mostly of NMOS transistors. This paper investigates gate leakage reduction of the PAL-2P circuits in nanometer CMOS processes with gate oxide materials. An s27 benchmark circuit from the ISCAS89 sequential benchmark set is verified using the PAL-2P scheme. All circuits are simulated with HSPICE using the 65nm CMOS process with gate oxide materials. Based on the power dissipation models of PAL-2P adiabatic circuits, active leakage dissipations are estimated by testing total leakage dissipations using SPICE simulations. The PAL-2P circuits consume low static power compared with traditional PAL-2N ones.

Sign in / Sign up

Export Citation Format

Share Document