Properties Development During Curing of Low Dielectric-Constant Spin-On Glasses

1998 ◽  
Vol 511 ◽  
Author(s):  
Robert F. Cook ◽  
Eric G. Liniger ◽  
David P. Klaus ◽  
Eva E. Simonyi ◽  
Stephan A. Cohen
Keyword(s):  
Dielectric Constant ◽  
Mechanical Stability ◽  
Low Dielectric Constant ◽  
Thermal Expansion Mismatch ◽  
Curing Time ◽  
Semiconductor Wafer ◽  
Trade Off ◽  
Low Dielectric ◽  
Semiconductor Wafer Fabrication ◽  
Critical Aspects

ABSTRACTVariations in the electrical and mechanical properties of silsesquioxane spin-on glass thin films are examined as a function of curing time and temperature. Particular attention is paid to the trade-off between producing low dielectric constant films, suitable for advanced microelectronic interconnection structures, and mechanically stable films, able to withstand semiconductor wafer fabrication processes. Two critical aspects of the mechanical stability of spin-on glasses are shown to be: the positive thermal expansion mismatch with silicon–leading to tensile film stresses; and reactivity with water–leading to susceptibility to stress-corrosion cracking.

Parylene AF-4: A Low εR Material Candidate For ULSI Multilevel Interconnect Applications

1996 ◽  
Vol 443 ◽  
Author(s):  
A.S. Harrus ◽  
M.A. Plano ◽  
D. Kumar ◽  
J. Kelly
Keyword(s):  
Thermal Stability ◽  
Dielectric Constant ◽  
Vapor Deposition ◽  
Mechanical Stability ◽  
Electrical Performance ◽  
Low Dielectric Constant ◽  
Good Adhesion ◽  
Low Dielectric ◽  
Device Integration ◽  
Electrical Data

AbstractParylene VIPTM AF-4 dielectric is a potential low εR candidate for ULSI manufacture. The search for new IMD materials with low dielectric constant (k ≤ 2.5) to enable sub 0.18 micron technologies is focusing on new polymers, deposited by either spinning or CVD methods. Two classes of requirements have to be satisfied for a material to be successful, i.e., used in volume device manufacturing. First, a set of physical characteristics have to be met, among the most important are thermal stability above 400 °C, mechanical stability, and good adhesion to a variety of substrates. Then, a second set of more stringent requirements have to be met related to device integration. For example, electrical performance in a device and dry etching for via formation. We report results on the evaluation of Parylene AF-4, deposited by vapor-deposition polymerization of tetrafluoro-p-xylylene. We present data on deposition characteristics, film composition and purity, thermal stability as well as preliminary electrical data.

Structure-Property Correlation in Low K Dielectric Materials

1999 ◽  
Vol 565 ◽  
Author(s):  
Michael Morgen ◽  
Jie-Hua Zhao ◽  
Michael Hay ◽  
Taiheui Cho ◽  
Paul S. Ho
Keyword(s):  
Dielectric Constant ◽  
Mechanical Stability ◽  
Process Integration ◽  
Dielectric Materials ◽  
Thermomechanical Properties ◽  
Low Dielectric Constant ◽  
Structure Property ◽  
Material Development ◽  
Low Dielectric ◽  
Low K

AbstractIn recent years there have been widespread efforts to identify low dielectric constant materials that can satisfy a number of diverse performance requirements necessary for successful integration into IC devices. This has led to extensive efforts to develop low k materials and the associated process integration. A particularly difficult challenge for material development has been to find the combination of low dielectric constant and good thermal and mechanical stability. In this paper recent characterization results for low k materials performed at the University of Texas will be reviewed, with an emphasis on the relationship of chemical structure to the aforementioned key material properties. For example, measurements showing the effect of film porosity on dielectric constant and thermal and mechanical properties is presented. This data, as well as that for other material types, demonstrates the tradeoffs between dielectric constant and thermomechanical properties that are often made during the course of material development.

Structire, Properties, and Process Characteristics of Low-K Materials Prepared by PECVD

1999 ◽  
Vol 565 ◽  
Author(s):  
Y. Shimogaki ◽  
S. W. Lim ◽  
E. G. Loh ◽  
Y. Nakano ◽  
K. Tada ◽  
...  
Keyword(s):  
Growth Rate ◽  
Dielectric Constant ◽  
Gas Flow ◽  
Structural Changes ◽  
Silicon Oxide ◽  
Reactive Species ◽  
Low Dielectric Constant ◽  
Low Dielectric ◽  
Step Coverage ◽  
Low K

AbstractLow dielectric constant F-doped silicon oxide films (SiO:F) can be prepared by adding fluorine source, like as CF4 to the conventional PECVD processes. We could obtain SiO:F films with dielectric constant as low as 2.6 from the reaction mixture of SiH4/N2 O/CF4. The structural changes of the oxides were sensitively detected by Raman spectroscopy. The three-fold ring and network structure of the silicon oxides were selectively decreased by adding fluorine into the film. These structural changes contribute to the decrease ionic polarization of the film, but it was not the major factor for the low dielectric constant. The addition of fluorine was very effective to eliminate the Si-OH in the film and the disappearance of the Si-OH was the key factor to obtain low dielectric constant. A kinetic analysis of the process was also performed to investigate the reaction mechanism. We focused on the effect of gas flow rate, i.e. the residence time of the precursors in the reactor, on growth rate and step coverage of SiO:F films. It revealed that there exists two species to form SiO:F films. One is the reactive species which contributes to increase the growth rate and the other one is the less reactive species which contributes to have uniform step coverage. The same approach was made on the PECVD process to produce low-k C:F films from C2F4, and we found ionic species is the main precursor to form C:F films.

Sign in / Sign up

Export Citation Format

Share Document