scholarly journals Accurate LDMOS Model Extraction Using DC, CV and Small Signal S Parameters Measurements for Reliability Issues

Author(s):  
Mouna Chetibi-Riah ◽  
Mohamed Masmoudi ◽  
Hichame Maanane ◽  
Jrme Marcon ◽  
Karine Mourgues ◽  
...  
Author(s):  
Rahis Kumar Yadav ◽  
Pankaj Pathak ◽  
R M Mehra

This article presents extraction of small signal model parameters and TCAD simulation of novel asymmetric field plated dual material gate AlGaN/GaN HFET first time. Small signal model is essential for design of LNA and microwave electronic circuit by using the proposed superior performance HFET structure. Superior performances of device are due to its dual material gate structure and field plate that can provide better electric field uniformity, suppression of short channel effects and improvement in carrier transport efficiency. In this article we used direct parameter extraction methodology in which S-parameters of device were measured using pinchoff cold FET biasing. The measured S-parameters are then transformed into Y-parameters to extract capacitive elements and then in to Z-parameters to extract series parasitic elements. Intrinsic parameters are extracted from Y-parameters after de-embedding all parasitic elements of devce. Microwave figure of merits and dc performance are also studied for proposed HFET. The important figure of merits of device reported in the paper include transconductance, drain conductance, current gain, transducer power gain, available power gain, maximum stable gain, maximum frequency of oscillation, cut-off frequency, stability factor and time delay. Reported results are validated with experimental and simulation results for consistency and accuracy.


Author(s):  
Artem Popov ◽  
Dmitry Bilevich ◽  
Andrei Salnikov ◽  
Igor Dobush ◽  
Aleksandr Goryainov ◽  
...  

Circuit World ◽  
2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Jincan Zhang ◽  
Min Liu ◽  
Jinchan Wang ◽  
Kun Xu

Purpose High-speed Indium Phosphide (InP) HBTs have been widely used to design high-speed analog, digital and mixed-signal integrated circuits. The purpose of this study is to propose a new parameter extraction procedure for determining an improved T-topology small-signal equivalent circuit of InP heterojunction bipolar transistors (HBTs). Design/methodology/approach The alternating current crowding effect is considered through adding the intrinsic base capacitance in the small-signal equivalent circuit. All of the circuit parameters are extracted directly without using any approximation. Findings The extraction technique is more easily understood and clearer than other extraction methods, as the equations are derived from the S-parameters by peeling peripheral elements from small-signal models to get reduced ones and extracting each equivalent-circuit parameter using each equation. Originality/value To validate the presented parameter extraction technology, an n-p-n emitter-up InP HBT was analyzed adopting the method. Excellent agreement between measured and modeled S-parameters is obtained up to 40 GHz.


Sign in / Sign up

Export Citation Format

Share Document