scholarly journals Preparation and characterization of Copper Chitosan Nanocomposites with Antibacterial Activity for Applications in Tissue Engineering

2017 ◽  
Author(s):  
◽  
K. Maldonado-Lara
Keyword(s):  
Tissue Engineering ◽  
Antibacterial Activity ◽  
Potential Application ◽  
Antibacterial Properties ◽  
Hydroxyl Groups ◽  
Liquid Media ◽  
Solution Blending ◽  
Nanoparticles Dispersion ◽  
Bacterial Penetration

The Present work describes the preparation of nanocomposites based on chitosan (QS)/copper nanoparticles (nCu) with antibacterial properties and potential application in tissue engineering. For this purpose, nanocomposites were prepared by solution blending with ultrasound assisted, aiming to increase the nanoparticles dispersion in the biopolymer. FTIR analyses demonstrates that nCu supported in QS increase their interaction of nanoparticles with amine/hydroxyl groups of QS molecule. UV-Vis analyses demonstrates that QS/nCu nanocomposites have an absorption signal associated with the presence of nanoparticles and the possible Cu2+ ions release in liquid media. AFM analyses shown that hydrated QS form a mesh with micro pores, improving the bacterial penetration and the direct contact with nCu. This behavior was corroborated by antibacterial assays, where QS/nCu nanocomposites shown an antibacterial activity higher than 90% between 90-180 minutes of interaction. Our results suggest that is possible to obtain combined antibacterial/biocompatible nanomaterials with potential application in tissue engineering.

scholarly journals Preparation and characterization of Copper Chitosan Nanocomposites with Antibacterial Activity for Applications in Tissue Engineering

2017 ◽  
Author(s):  
◽  
K. Maldonado-Lara
Keyword(s):  
Tissue Engineering ◽  
Antibacterial Activity ◽  
Potential Application ◽  
Antibacterial Properties ◽  
Hydroxyl Groups ◽  
Liquid Media ◽  
Solution Blending ◽  
Nanoparticles Dispersion ◽  
Bacterial Penetration

The Present work describes the preparation of nanocomposites based on chitosan (QS)/copper nanoparticles (nCu) with antibacterial properties and potential application in tissue engineering. For this purpose, nanocomposites were prepared by solution blending with ultrasound assisted, aiming to increase the nanoparticles dispersion in the biopolymer. FTIR analyses demonstrates that nCu supported in QS increase their interaction of nanoparticles with amine/hydroxyl groups of QS molecule. UV-Vis analyses demonstrates that QS/nCu nanocomposites have an absorption signal associated with the presence of nanoparticles and the possible Cu2+ ions release in liquid media. AFM analyses shown that hydrated QS form a mesh with micro pores, improving the bacterial penetration and the direct contact with nCu. This behavior was corroborated by antibacterial assays, where QS/nCu nanocomposites shown an antibacterial activity higher than 90% between 90-180 minutes of interaction. Our results suggest that is possible to obtain combined antibacterial/biocompatible nanomaterials with potential application in tissue engineering.

scholarly journals Antibacterial Properties of Biofilm Schiff Base Derived from Dialdehyde Cellulose and Chitosan

2019 ◽  
Vol 19 (2) ◽  
pp. 405
Author(s):  
Agung Pratama ◽  
Firman Sebayang ◽  
Rumondang Bulan Nasution
Keyword(s):  
Tensile Strength ◽  
Antibacterial Activity ◽  
Schiff Base ◽  
Antibacterial Properties ◽  
Oxidized Cellulose ◽  
Natural Polymers ◽  
Dialdehyde Cellulose ◽  
Ft Ir ◽  
Ir Analysis

Cellulose and chitosan are natural polymers that have been used as biocomposite. The aim of this research is to obtain biofilms from chitosan and oxidized cellulose crosslinks. This research is divided into three steps, i.e., isolation of cellulose from oil palm trunk and oxidation of cellulose using NaIO4 (0.2; 0.4; 0.6; 0.8; 1.0 mg/mL) to obtain dialdehyde cellulose (DAC), crosslink of oxidized cellulose with chitosan (DD = 72.85%) to obtain biofilm of chitosan/DAC (CDAC), and characterization of biofilms. The crosslinked reaction was confirmed by FT-IR analysis that showed the spectrum of Schiff base C=N group at 1651 cm–1. Tensile strength increased gradually when the NaIO4 concentration used was 0.2–0.6 mg/mL, but after those concentrations, the tensile strength slightly decreased. The morphology analysis showed that CDAC had smoother morphology than DAC, which was shown rough and showed some particle indicated the presence of unreacted cellulose. CDAC biofilms that prepared with 1.0 mg/mL NaIO4 showed the greatest antibacterial activity.

scholarly journals NOVEL COMPOSITE OF SILVER-BACTERIAL CELLULOSE (Ag-BC) FROM SIWALAN SAP (Borassus flabellifer) AND ITS ANTIBACTERIAL ACTIVITY

2020 ◽  
Vol 83 (1) ◽  
pp. 19-25
Author(s):  
Suntini Suntini ◽  
Anastasia Wheni Indrianingsih ◽  
Harjono Harjono
Keyword(s):  
Antibacterial Activity ◽  
Bacterial Cellulose ◽  
Antibacterial Properties ◽  
Reduction Process ◽  
Diffusion Method ◽  
Natural Material ◽  
Gram Positive Bacteria ◽  
Antibacterial Assay ◽  
Natural Composite

Recently, a wound healing from natural composite with excellent properties is in a high demand. In this study, a novel composite of bacterial cellulose made from Siwalan sap (Borassus flabellifer) was achieved. Siwalan is a common plant in Java Island of Indonesia and the application is very limited for beverage only. This study aims to determine the effect of the AgNO3/NaBH4 concentration ratio in the development of Ag-BC composites and its antibacterial properties from Siwalan sap. Ag-BC composites were prepared by impregnating the silver solution into the BC matrix through the reduction process with NaBH4. Characterization of Ag-BC composites conducted using Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), and Energy Dispersive X-ray (EDX). Antibacterial assay was performed using disc diffusion method against Salmonella typhimurium (Gram-negative) and Staphylococcus aureus (Gram-positive) bacteria. The characterization of Ag-BC composite shows the nanostructure of BC with a length of fiber around 35-60 nm in width. The SEM-EDX micrograph showed that silver particles were impregnated into the BC matrix. Antibacterial activity test results showed that the Ag-BC composite had the ability to inhibit the bacteria S. typhimurium and S. aureus with good inhibition. This result showed the potential application of Ag-BC composite from Siwalan plant as a natural material for medical and pharmaceutical purpose, especially as an antibacterial agent.

scholarly journals Fabrication and Characterization of Scaffolds of Poly(ε-caprolactone)/Biosilicate® Biocomposites Prepared by Generative Manufacturing Process

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Daniel Aparecido Lopes Vieira da Cunha ◽  
Paulo Inforçatti Neto ◽  
Kelli Cristina Micocci ◽  
Caroline Faria Bellani ◽  
Heloisa Sobreiro Selistre-de-Araujo ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Manufacturing Process ◽  
Potential Application ◽  
Morphological Characterization ◽  
Mechanical Compression ◽  
Compression Tests ◽  
Extrusion Head ◽  
Fabrication And Characterization

Scaffolds of poly(ε-caprolactone) (PCL) and their biocomposites with 0, 1, 3, and 5 wt.% Biosilicate® were fabricated by the generative manufacturing process coupled with a vertical miniscrew extrusion head to application for restoration of bone tissue. Their morphological characterization indicated the designed 0°/90° architecture range of pore sizes and their interconnectivity is feasible for tissue engineering applications. Mechanical compression tests revealed an up to 57% increase in the stiffness of the scaffold structures with the addition of 1 to 5 wt.% Biosilicate® to the biocomposite. No toxicity was detected in the scaffolds tested by in vitro cell viability with MC3T3-E1 preosteoblast cell line. The results highlighted the potential application of scaffolds fabricated with poly(ε-caprolactone)/Biosilicate® to tissue engineering.

Characterization of novel calcium hydroxide‐mediated highly porous chitosan‐calcium scaffolds for potential application in dentin tissue engineering

2020 ◽  
Vol 108 (6) ◽  
pp. 2546-2559 ◽  
Author(s):  
Diana Gabriela Soares ◽  
Ester Alves Ferreira Bordini ◽  
Fernanda Balestrero Cassiano ◽  
Erika Soares Bronze‐Uhle ◽  
Leandro Edgar Pacheco ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Calcium Hydroxide ◽  
Potential Application ◽  
Porous Chitosan ◽  
Highly Porous

Characterization of a Novel Polymeric Scaffold for Potential Application in Tendon/Ligament Tissue Engineering

2006 ◽  
Vol 0 (0) ◽  
pp. 060118075515005 ◽  
Author(s):  
S. Sahoo ◽  
H. Ouyang ◽  
James C.-H. Goh ◽  
T.E. Tay ◽  
S.L. Toh
Keyword(s):  
Tissue Engineering ◽  
Potential Application ◽  
Polymeric Scaffold ◽  
Ligament Tissue Engineering

scholarly journals Antibacterial Activity and Drug Loading of Moxifloxacin-Loaded Poly(Vinyl Alcohol)/Chitosan Electrospun Nanofibers

2021 ◽  
Vol 8 ◽  
Author(s):  
Qi Liu ◽  
Wen-Chong Ouyang ◽  
Xiu-Hong Zhou ◽  
Tao Jin ◽  
Zheng-Wei Wu
Keyword(s):  
Antibacterial Activity ◽  
Vinyl Alcohol ◽  
Composite Nanofibers ◽  
Drug Loading ◽  
Antibacterial Properties ◽  
Electrospun Nanofibers ◽  
Poly Vinyl Alcohol ◽  
X Ray Diffraction ◽  
Blank Group

In this study, nanofibers with different ratios of poly(vinyl alcohol) and chitosan incorporated with moxifloxacin hydrochloride (MH/PVA/CS) were fabricated through the blending electrospinning, and the morphological features were tested using scanning electron microscopy (SEM). Further characterization of the new nanofiber was accomplished by Thermogravimetric analysis (TG), X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR). Antibacterial activity of the MH-loaded nanofibers at different drug loading were tested and compared with the blank group. Experimental results show that the MH/PVA/CS nanofibers exhibited the good antibacterial properties against Staphylococcus aureus and Pseudomonas aeruginosa due to the MH incorporation. Compared with blank nanofibers, MH/PVA/CS nanofibers have significantly better antibacterial properties, and different proportions of PVA and CS have a certain effect on the antibacterial activity of nanofibers. The conclusions in this paper show that MH/PVA/CS composite nanofibers may have great potential in antibacterial materials.

scholarly journals Synthesis and Characterization of Selenium Nanoparticles-Lysozyme Nanohybrid System with Synergistic Antibacterial Properties

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Mahsa Vahdati ◽  
Tahereh Tohidi Moghadam
Keyword(s):  
Antibacterial Activity ◽  
Bacterial Growth ◽  
Biomedical Applications ◽  
Antibacterial Properties ◽  
Complex Form ◽  
Vital Role ◽  
Selenium Nanoparticles ◽  
Low Concentrations ◽  
Very High

AbstractIn the light of promising potency of selenium nanoparticles in biomedical applications, this is the first study to report the synergistic antibacterial activity of these nanoparticles and lysozyme. The nanohybrid system was prepared with various concentrations of each component. Resistance of Escherichia coli and Staphylococcus aureus was compared in the presence of individual Nano and Bio counterparts as well as the nanohybrid system. Upon interaction of SeNPs with Lysozyme, the nanohybrid system efficiently enhanced the antibacterial activity compared to the protein. Therefore, SeNPs play an important role in inhibition of bacterial growth at very low concentrations of protein; whereas very high amount of the protein is required to inhibit bacterial growth individually. On the other hand, lysozyme has also played a vital role in antibacterial property of SeNPs, inducing 100% inhibition at very low concentration of each component. Hence, presence of both nano and bio counterparts induced vital interplay in the Nanohybrid system. The aged samples also presented good stability of SeNPs both as the intact and complex form. Results of this effort highlight design of nanohybrid systems with synergistic antibacterial properties to overcome the emerging antibiotic resistance as well as to define fruitful applications in biomedicine and food safety.

scholarly journals Extraction and Characterization of Natural Dye from Green Walnut Shells and Its Use in Dyeing Polyamide: Focus on Antibacterial Properties

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Mohammad Mirjalili ◽  
Loghman Karimi
Keyword(s):  
Antibacterial Activity ◽  
Antibacterial Properties ◽  
Natural Dye ◽  
Cupric Sulfate ◽  
Walnut Shells ◽  
Soxhlet Apparatus ◽  
Dyed Fabrics ◽  
Potassium Aluminum Sulfate ◽  
Layer Chromatography

Extraction of dyes from walnut using Soxhlet apparatus has been studied. The color components extracted and isolated from walnut shells were characterized by column chromatography, thin layer chromatography (TLC), nuclear magnetic resonance (NMR), mass spectroscopy (MS), and infrared (IR) techniques. Natural dye extract obtained from the walnut was used in dyeing polyamide fabrics with different mordants. The dyed fabrics were evaluated for antibacterial activity against pathogenic strains of Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria. As such, the relationship between antibacterial activity and dye concentration is investigated. Durability of antibacterial activity to laundering is also discussed. Results indicate that the polyamide dyed with walnut displayed excellent antibacterial activity in the presence of ferric sulfate, cupric sulfate, and potassium aluminum sulfate and exhibited good and durable fastness properties.

scholarly journals Electrospun VDF-TeFE Scaffolds Modified by Copper and Titanium in Magnetron Plasma and Their Antibacterial Activity against MRSA

Technologies ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 5
Author(s):  
Arsalan D. Badaraev ◽  
Marat I. Lerner ◽  
Dmitrii V. Sidelev ◽  
Evgeny N. Bolbasov ◽  
Sergei I. Tverdokhlebov
Keyword(s):  
Electron Microscopy ◽  
Tissue Engineering ◽  
Scanning Electron Microscopy ◽  
Antibacterial Activity ◽  
Vinylidene Fluoride ◽  
Fiber Diameter ◽  
Antibacterial Properties ◽  
Argon Atmosphere ◽  
Copolymer Solution ◽  
Scanning Electron

Copolymer solution of vinylidene fluoride with tetrafluoroethylene (VDF-TeFE) was used for electrospinning of fluoropolymer scaffolds. Magnetron co-sputtering of titanium and copper targets in the argon atmosphere was used for VDF-TeFE scaffolds modification. Scanning electron microscopy (SEM) showed that scaffolds have a nonwoven structure with mean fiber diameter 0.77 ± 0.40 μm, mean porosity 58 ± 7%. The wetting angle of the original (unmodified) hydrophobic fluoropolymer scaffold after modification by titanium begins to possess hydrophilic properties. VDF-TeFE scaffold modification by titanium/copper leads to the appearance of strong antibacterial properties. The obtained fluoropolymer samples can be successfully used in tissue engineering.

Sign in / Sign up

Export Citation Format

Share Document