The Role of Trapped Interstitials During Rapid Thermal Annealing

1985 ◽  
Vol 52 ◽  
Author(s):  
S. J. Pennycook ◽  
R. J. Culbertson
Keyword(s):  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Dopant Diffusion ◽  
Group V ◽  
Projected Range ◽  
The Mean ◽  
Detailed Nature ◽  
Ion Implanted

ABSTRACTDuring the rapid thermal annealing of ion implanted layers, trapped interstitials are responsible for transient enhanced dopant diffusion and the formation of a band of defects at the mean projected ion range. We describe the detailed nature and extent of these effects and show how they can be predicted in practice. We present a model which explains why trapping only occurs with group V implantation and describe double implantation experiments which confirm the model and show how the formation of projected range defects can be suppressed.

Susceptor and Proximity Rapid Thermal Annealing of InP

1990 ◽  
Vol 181 ◽  
Author(s):  
A. Katz ◽  
S. J. Pearton ◽  
M. Geva
Keyword(s):  
Surface Morphology ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Substrate Surface ◽  
Effective Surface ◽  
Group V ◽  
Surface Protection ◽  
Pit Formation ◽  
Annealing Cycle ◽  
Inp Substrates

ABSTRACTAn intensive comparison between the efficiency of InP rapid thermal annealing within two types of SiC-coated graphite susceptors and by using the more conventional proximity approach, in providing degradation-free substrate surface morphology, was carried out. The superiority of annealing within a susccptor was clearly demonstrated through the evaluation of AuGe contact performance to carbon-implanted InP substrates, which were annealed to activate the implants prior to the metallization. The susceptor annealing provided better protection against edge degradation, slip formation and better surface morphology, due to the elimination of P outdiffusion and pit formation. The two SiC-coated susceptors that were evaluated differ from each other in their geometry. The first type must be charged with the group V species prior to any annealing cycle. Under the optimum charging conditions, effective surface protection was provided only to one anneal (750°C, 10s) of InP before charging was necessary. The second contained reservoirs for provision of the group V element partial pressure, enabled high temperature annealing at the InP without the need for continual recharging of the susceptor. Thus, one has the ability to subsequentially anneal a lot of InP wafers at high temperatures without inducing any surface deterioration.

Effect of rapid thermal annealing on carrier lifetimes of arsenic‐ion‐implanted GaAs

1996 ◽  
Vol 69 (7) ◽  
pp. 996-998 ◽  
Author(s):  
Gong‐Ru Lin ◽  
Wen‐Chung Chen ◽  
Feruz Ganikhanov ◽  
C.‐S. Chang ◽  
Ci‐Ling Pan
Keyword(s):  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Carrier Lifetimes ◽  
Ion Implanted

Stability of Ultra-Thin Gate Oxides with Boron Doped Polysilicon Gate Structures After Rapid Thermal Annealing

1993 ◽  
Vol 303 ◽  
Author(s):  
Bojun Zhang ◽  
Dennis M. Maher ◽  
Mark S. Denker ◽  
Mark A. Ray
Keyword(s):  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Depth Profiling ◽  
Gate Oxide ◽  
Annealing Condition ◽  
Dopant Diffusion ◽  
Boron Diffusion ◽  
Gate Oxides ◽  
Diffusion Behavior ◽  
Polysilicon Gate

ABSTRACTWe report a systematic study of dopant diffusion behavior for thin gate oxides and polysilicon implanted gate structures. Boron behavior is emphasized and its behavior is compared to that of As+ and BF2+. Dopant activation is achieved by rapid thermal annealing. Test structures with 100 Å, 60 Å and 30 Å gate oxides and ion implanted polysilicon gate electrodes were fabricated and characterized after annealing by SIMS, SEM, TEM, and C-V rpeasurements. For arsenic implanted structures, no dopant diffusion through a gate oxide of 30 Å thickness and an annealing condition as high as 1 100*C/1Os was observed. For boron implanted structures, as indicated by SIMS depth profiling, structures annealed at 1000*C/10s exhibit a so-called critical condition for boron diffusion through a 30 Å gate oxide. Boron dopant penetration is clearly observed for 60 Å gate oxides at an annealing condition of 1050 0C/10s. The flatband voltage shift can be as high as 0.56 volts as indicated by C-V measurements for boron penetrated gate oxides. However, 100 Å gate oxides are good diffusion barriers for boron at an annealing condition of 1100°C/10s. For BF2 implanted structures, the diffusion behavior is consistent with behavior reported in the literature.

Rapid Thermal Annealing of Neutron Transmutation Toped Czochralski Silicon

1992 ◽  
Vol 262 ◽  
Author(s):  
G. M. Berezina ◽  
F. P. Kdrshunov ◽  
N. A. Sobolev ◽  
A. V. Voevodova ◽  
A. A. Stuk
Keyword(s):  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Neutron Irradiation ◽  
Irradiation Temperature ◽  
Electrical Parameters ◽  
Furnace Annealing ◽  
Annealing Behaviour ◽  
Czochralski Silicon ◽  
Neutron Transmutation

ABSTRACTThe influence of the rapid thermal annealing (RTA) in comparison with that of the standard furnace annealing (FA) on the electrical parameters and photoluminescence (PL) of Czochralski silicon (Cz Si) subjected to neutron irradiation at various temperatures has been studied. The role of the irradiation temperature on the annealing behaviour of electrical parameters in Cz Si has been established. The possibility of getting neutron transmutation doped (NTD) Cz Si having the calculated resistivity by means of the RTA is shown.

Anomalous Transient Diffusion of Ion Implanted Boron during Rapid Thermal Annealing

1989 ◽  
Vol 146 ◽  
Author(s):  
Y. M. Kim ◽  
G. Q. Lo ◽  
D. L. Kwong ◽  
H. H. Tseng ◽  
R. Hance
Keyword(s):  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Anomalous Diffusion ◽  
Low Dose ◽  
Silicon Wafers ◽  
Silicon Ions ◽  
Defect Evolution ◽  
Boron Implantation ◽  
Silicon Implantation ◽  
Ion Implanted

ABSTRACTEffects of defect evolution during rapid thermal annealing (RTA) on the anomalous diffusion of ion implanted boron have been studied by implanting silicon ions prior to boron implantation with doses ranging from 1 × 1014cm−2 to 1 × 1016cm−2 at energies ranging from 20 to 150 KeV into silicon wafers. Diffusion of boron atoms implanted into a Si preamorphized layer during RTA is found to be anomalous in nature, and the magnitude of boron displacement depends on the RTA temperature. While RTA of preamorphized samples at 1150°C shows an enhanced boron displacement compared to that in crystalline samples, a reduced displacement is observed in preamorphized samples annealed by RTA at 1000°C. In addition, low dose pre-silicon implantation enhances the anomalous displacement significantly, especially at high RTA temperatures (1 150°C). Finally, the anomalous diffusion is found to depend strongly on the defect evolution during RTA.

Sign in / Sign up

Export Citation Format

Share Document