On the Electronic Database of the Armenian Word-Formation

The formal description of the languages has become more and more practical; however, it should be noted that the full formal description of the Armenian language has not yet been done. However, the fact that certain attempts have been made is undeniable. The Electronic database of the Armenian word-formation (https://formlang.am/) is the first stage of the complex project in the full formal description of the Armenian language. In the current article, we want to present the advantages of the electronic database of the Armenian word-formation. The electronic database containing the word-formation analysis of thousands of words can search for words and morphemes within them. It means that searching for any root or affix appears all the simple, compound, derived and derived-compound words made up of them. It enables us to reveal the regular structures and the variative forms, deflections, and irregularities with frequency data with their automatic analysis and the possibility of derivation. The database gives a great opportunity to study the Armenian word-formation on synchronic and diachronic points, to discover the basic patterns of the formation of new words, by the thousands of examples to find out the principles and ways of word-formation in the Armenian language, to have the full list of the distinguished simple, compound, derived and derived-compound Armenian words. The current database has not only practical great value to involve the Armenian language in the domain of the modern informational technologies as the communicative mean, but also significant theoretical value to present the accurate description of the vocabulary structure. Thus, it will give an excellent perspective for solving the problems of theoretical linguistics and the practical -applied tasks. It can be significant for the further development of Armenology.

Examination of Structures Built with Tunnel Formwork in Terms of Strength and Cost according to the Earthquake Regulations of 2007 and 2018

Turkey has always been exposed to active fault lines passing through and unpredictable seismic activities. These ground movements have always been one of the important issues in our country, which have led to great destruction and loss of lives and property in its past. For this reason, our earthquake regulations, which aim to design more accurately against earthquake movements, are continuously made improvements. In this study, the analysis of structures built with tunnel formwork system which is popular today with the new earthquake regulations entered into force in 2018, and the strength and cost according to the old earthquake regulation in terms of what differences will occur. In addition to the study, we investigated how the number of floors and regular floor plans affects the results. For this purpose, two types of structures were covered with 5, 10, and 15 storey models created, first in the 2007 earthquake regulation; then, in the 2018 earthquake regulation, design analysis was carried out. As a result, the new earthquake regulation, which came into force in 2018, led to more realistic results as it provides more accurate environmental inputs used in design analysis. Earthquake loads affecting floors increased by 3.9% for 5 storey in regular structures, decreasing by 38.4% for 10 stories and 43.3% for 15 stories. More irregular structures increased 7.3% for 5 storey, 10-storey structures decreased by 38.9%, and 15-storey structures decreased by 43.6%. In terms of cost, there was a 0.07% increase in total cost in 5-storey buildings, 2.45% in 10-storey buildings, and a 3.91% reduction in 15-storey buildings. In addition to these results, an empirical formula that estimates m2 prices depending on the number of floors was obtained.

The dependence of coordinate measurements error of the geometric elements shape characteristics of products on the control points number

The issues of estimating the error of coordinate measurements of the shape characteristics of geometric elements of products depending on the number of control points, taking into account a given confidence probability, are considered. Analytical models are proposed for estimating the error based on a priori data, similar to estimating uncertainty by type B. The correspondence of model and experimental results is verified by the Monte Carlo method using a specially developed program in VBA and the library functions of the Statistical Analysis package of the Microsoft Excel program. Such a characteristic of the shape of the part as roundness is investigated. The influence of the parameters of regular structures associated with the features of the technological processes of manufacturing the part on the parameters of the distribution function of the coordinates of the control points is revealed. Fourier analysis is used to identify and quantify regular structures on the surface of the part. The sources of error that have a significant impact on the results of measurements of the shape characteristics of geometric elements of products are given. Based on the results of statistical calculations, the dependence of the measurement error of the shape characteristics on the number of control points is analyzed, the scope of application of analytical formulas for estimating the error of single measurements for a given confidence probability is determined. The article is intended for specialists in the field of practical coordinate metrology and related fields.

Comparison of Analysis and Design of Regular and Irregular Configuration of Multi Story Building in Seismic Zones

This paper is concerned with the effects of various vertical irregularities on the seismic response of a structure. The objective of the project is to carry out Response spectrum analysis (RSA) and Time history Analysis (THA) of vertically irregular RC building frames and to carry out the ductility based design using IS 13920 corresponding to Equivalent static analysis and Time history analysis. Comparison of the results of analysis and design of irregular structures with regular structure was done. The scope of the project also includes the evaluation of response of structures subjected to high, low and intermediate frequency content earthquakes using Time history analysis. Three types of irregularities namely mass irregularity, stiffness irregularity and vertical geometry irregularity were considered. According to our observation, the storey shear force was found to be maximum for the first storey and it decreases to minimum in the top storey in all cases. The mass irregular structures were observed to experience larger base shear than similar regular structures. The stiffness irregular structure experienced lesser base shear and has larger inter-storey drifts. The absolute displacements obtained from time history analysis of geometry irregular structure at respective nodes were found to be greater than that in case of regular structure for upper stories but gradually as we moved to lower stories displacements in both structures tended to converge. . Lower stiffness results in higher displacements of upper stories. In case of a mass irregular structure, time history analysis gives slightly higher displacement for upper stories than that in regular structures whereas as we move down lower stories show higher displacements as compared to that in regular structures. When time history analysis was done for regular as well as stiffness irregular structure, it was found that displacements of upper stories did not vary much from each other but as we moved down to lower stories the absolute displacement in case of soft storey were higher compared to respective stories in regular structure. Tall structures were found to have low natural frequency hence their response was found to be maximum in a low frequency earthquake. It is because low natural frequency of tall structures subjected to low frequency earthquake leads to resonance resulting in larger displacements. If a high rise structure (low natural frequency)is subjected to high frequency ground motion then it results in small displacements. Similarly, if a low rise structure (high natural frequency) is subjected to high frequency ground motion it results in larger displacements whereas small displacements occur when the high rise structure is subjected to low frequency ground motion.

A Study on Mass Irregularity Limits of RC Structures for Various Seismic Zones of India

The performance of any structure under lateral loads depends on its structural configuration. Most of the codes worldwide mentioned the provisions for the lateral load analysis for regular structures. Structures may be irregular in practice due to uneven distributions in mass, stiffness and strength. In India, most common type of multi-storied apartments constructed varies from 5 to 15 storeys and many apartments are constructed with penthouse which creates mass irregularity in the structures. The present study investigates the performance of mass irregular structures which are created by providing penthouse and also modeled as a stepped setback structure. Total four structures, 5, 7, 11 and 16 storied with an aspect ratio (height to width of the structure) of 0.64, 0.88, 1.36 and 1.96 are considered. For each structure response spectrum analysis is carried and the response parameters like storey displacements, storey drift and base shear variation in 4 seismic zones of India is studied. The main focus of the investigation is to understand the acceptance of mass irregularity with respect to the aspect ratio of the structure. The acceptance limit of the mass irregularity is also investigated as per 4 seismic zones of India. The results are compared with Indian standard code limits and concluded the acceptance limit as per seismic zones of India.

Mechanistic Study on Gold-Like Luster Development of Solution-Cast Oligo(3-methoxythiophene) Film

Solution-cast coating films of perchlorate-doped oligo(3-methoxythiophene) exhibited a gold-like luster similar to that of metallic gold despite the involvement of no metals. However, the development mechanism of the luster remains ambiguous. To understand the mechanism, we performed scanning electron microscopic analysis, variable-angle spectral reflectance measurements, and ellipsometry measurements on ClO4−-doped oligo(3-methoxythiophene) cast film with a gold-like luster. The results revealed that the lustrous color of the film was not induced by the submicron-sized regular structures (structural color), nor by the high-density free electrons (reflective response based on Drude model), but by the large optical constants (refractive index and extinction coefficient) of the film, as speculated previously.

Combining Interference Lithography and Two-Photon Lithography for Fabricating Large-Area Photonic Crystal Structures with Controlled Defects

Interference lithography is a promising method for fabricating large-area, defect-free three-dimensional photonic crystal structures which can be used for facilitating the realization of photonic devices with a fast processing time. Although they can be used in waveguides, resonators, and detectors, their repeated regular array patterns can only be used for limited applications. In this study, we demonstrate a method for fabricating large-area photonic crystal structures with controlled defects by combining interference lithography and two-photon lithography using a light-curable resin. By combining regular array structures and controlled patterns, monotonous but large-area regular structures can be obtained. Furthermore, the patterned structures have considerable potential for use in various applications, such as solar cells, sensors, photodetectors, micro-/nano-electronics, and cell growth.

Convective instability of air flows in the exhaust shaft above a four-row finned beam

Herein, multidirectional quasiperiodic air flows in an exhaust shaft above a four-order horizontal bundle consisting of bimetallic finned tubes used to remove heat in heat exchangers are considered. Modeling of the air movement is carried out on the basis of equations for thermogravitational convection in the Boussinesq approximation. It takes into account the viscosity of the air and the dependence of the air density on the temperature. An interpretation of quasiperiodic airstreams is proposed on the basis of Rayleigh – Bénard convection, as a result of which regular structures, called Rayleigh – Bénard cells, are formed in a liquid or gas. Rayleigh – Bénard cells are an analytical solution to the problem of the stability of hydrodynamics flows in the linear approximation. The appearance of two-dimensional (convective rolls) and threedimensional (rectangular cells) is possible. To estimate the number of emerging structures, the critical Rayleigh numbers were calculated, which characterizes the transition from an unstable mode of the convective fluid flow to a stable mode. For two experiments, the experimental Rayleigh numbers are compared with their critical values. The differences between the experimental conditions and the ideal boundary conditions used in the calculations and the partial destruction of quasiperiodic structures as a result of this are also discussed.

Graph-structured populations and the Hill–Robertson effect

The Hill–Robertson effect describes how, in a finite panmictic diploid population, selection at one diallelic locus reduces the fixation probability of a selectively favoured allele at a second, linked diallelic locus. Here we investigate the influence of population structure on the Hill–Robertson effect in a population of size N . We model population structure as a network by assuming that individuals occupy nodes on a graph connected by edges that link members who can reproduce with each other. Three regular networks (fully connected, ring and torus), two forms of scale-free network and a star are examined. We find that (i) the effect of population structure on the probability of fixation of the favourable allele is invariant for regular structures, but on some scale-free networks and a star, this probability is greatly reduced; (ii) compared to a panmictic population, the mean time to fixation of the favoured allele is much greater on a ring, torus and linear scale-free network, but much less on power-2 scale-free and star networks; (iii) the likelihood with which each of the four possible haplotypes eventually fix is similar across regular networks, but scale-free populations and the star are consistently less likely and much faster to fix the optimal haplotype; (iv) increasing recombination increases the likelihood of fixing the favoured haplotype across all structures, whereas the time to fixation of that haplotype usually increased, and (v) star-like structures were overwhelmingly likely to fix the least fit haplotype and did so significantly more rapidly than other populations. Last, we find that small ( N < 64) panmictic populations do not exhibit the scaling property expected from Hill & Robertson (1966 Genet. Res. 8 , 269–294. ( doi:10.1017/S0016672300010156 )).

Carrier-Free Immobilization of α-Galactosidase as Nano-Biocatalysts for Synthesizing Prebiotic α-Galacto-Oligosaccharides

α-Galacto-oligosaccharides (α-GOSs) have great functions as prebiotics and therapeutics. This work established the method of batch synthesis of α-GOSs by immobilized α-galactosidase for the first time, laying a foundation for industrial applications in the future. The α-galactosidase from Aspergillus niger L63 was immobilized as cross-linked enzyme aggregates (CLEAs) nano-biocatalyst through enzyme precipitating and cross-linking steps without using carriers. Among the tested agents, the ammonium sulfate showed high precipitation efficacy and induced regular structures of α-galactosidase CLEAs (Aga-CLEAs) that had been analyzed by scanning electron microscopy and Fourier-transform infrared spectroscopy. Through optimization by response surface methodology, the ammonium sulfate-induced Aga-CLEAs achieved a high activity recovery of around 90% at 0.55 U/mL of enzymes and 36.43 mM glutaraldehyde with cross-linking for 1.71 h. Aga-CLEAs showed increased thermal stability and organic solvent tolerance. The storage ability was also improved since it maintained 74.5% activity after storing at 4 °C for three months, significantly higher than that of the free enzyme (21.6%). Moreover, Aga-CLEAs exhibited excellent reusability in the α-GOSs synthesis from galactose, retaining above 66% of enzyme activity after 10 batch reactions, with product yields all above 30%.