CORRELATIONS AMONG KERNEL CHARACTERISTICS AND MATURITY IN FIVE OAT CROSSES

1974 ◽  
Vol 54 (4) ◽  
pp. 735-737
Author(s):  
M. L. KAUFMANN
Keyword(s):  
Genetic Variability ◽  
Avena Sativa ◽  
Kernel Weight ◽  
Test Weight ◽  
Significant Heterogeneity ◽  
High Positive Correlation ◽  
Positive Correlation

Five kernel characteristics and maturity of 35 random lines in each of five oat (Avena sativa L.) crosses were studied in each of 2 yr. Test weight was negatively correlated with percent bosom kernels in all crosses while kernel weight showed a consistently high positive correlation with percent plump kernels. Of the correlations for 15 pairs of traits measured, 5 showed significant differences between crosses. Interseason correlations were significant in all but 4 of the 30 cases, indicating that there was significant genetic variability for most traits in most crosses. The highest interseason correlations were observed for kernel weight and percent plump kernels. Maturity and percent hull tended to have the lowest interseason correlations. No characteristic showed significant heterogeneity of interseason correlations.

Kochia (Kochia scoparia) Interference with Oat (Avena sativa)

1996 ◽  
Vol 10 (3) ◽  
pp. 522-525 ◽  
Author(s):  
Frank A. Manthey ◽  
Gary A. Hareland ◽  
Richard K. Zollinger ◽  
Donna J. Huseby
Keyword(s):  
Field Experiment ◽  
Grain Yield ◽  
Protein Content ◽  
Lipid Content ◽  
Avena Sativa ◽  
Kernel Weight ◽  
Test Weight ◽  
Kochia Scoparia ◽  
Yield And Quality

A field experiment was conducted over five years to determine the effect of season-long kochia interference on oat yield and quality. Kochia interference did not affect oat height, test weight, 500-kernel weight, or groat percentage. Similarly, ash, starch, and total β-glucan percentages in oat groat were not affected by kochia interference. Oat grain yield was reduced in 1991 and 1994 by 30 kochia plants/m2, the highest density. Lipid and protein content were not affected by kochia except in 1992 where protein content was reduced and lipid content was increased by kochia.

Naked oat response to soil type and herbicides applied at two growing stages

2010 ◽  
Vol 90 (3) ◽  
pp. 247-255
Author(s):  
N Lanoïe ◽  
A Vanasse ◽  
J Collin ◽  
J Frégeau-Reid ◽  
D Pageau ◽  
...  
Keyword(s):  
Weed Control ◽  
Avena Sativa ◽  
Soil Type ◽  
Kernel Weight ◽  
The Other ◽  
Test Weight ◽  
Soil Types ◽  
Naked Oat ◽  
Tribenuron Methyl

Naked oat (Avena sativa L.) harvested in the province of Quebec, Canada, develops on average 10% covered grains and sometimes more. The objective of this study was to determine the effect of soil type, herbicides and their application stages on the proportion of covered grains in naked oat genotypes. Three genotypes were evaluated over 2 yr at two experimental sites. At each site, trials were seeded on two different soil types and each entry was treated with one of three types of herbicides: bromoxynil/MCPA, dicamba/MCPA and thifensulfuron methyl/tribenuron methyl, and compared with a weed-free check. The herbicides were applied at Zadoks 12-13 and 22-23. Results showed that dicamba/MCPA herbicide, applied at Zadoks 12-13, increased covered grains compared with the weed-free check and more covered grains were produced with the application made at Zadoks 22-23. However, differences in genotype reactions were observed. Few differences were found among the other weed control treatments. The application of dicamba/MCPA at Zadoks 22-23 decreased yield and test weight, but increased kernel weight. The other weed control treatments had no effect on agronomic characteristics.Key words: Avena sativa, herbicide, dicamba/MCPA, soil type, covered grains

Evaluation of oat germplasm for resistance to diclofop-methyl

1991 ◽  
Vol 71 (2) ◽  
pp. 491-495 ◽  
Author(s):  
Solomon Kibite ◽  
K. Neil Harker
Keyword(s):  
Grain Yield ◽  
Key Words ◽  
Avena Sativa ◽  
Field Experiments ◽  
Herbicide Tolerance ◽  
Kernel Weight ◽  
Avena Fatua ◽  
Test Weight ◽  
Resistant Cultivars ◽  
Parental Lines

In field experiments at Lacombe, Alberta, four diclofop-methyl tolerant oat (Avena sativa L.) genotypes introduced from Australia generally exhibited greater tolerance to postemergence applications of diclofop-methyl at 0.8 kg a.i. ha−1 than five Canadian oat genotypes. Grain yield, height, test weight and kernel weight reductions caused by the herbicide were generally less for the Australian than the Canadian genotypes. However, the level of tolerance observed in the Australian genotypes was not sufficient to justify their use as parental lines to develop diclofop-methyl resistant cultivars. Key words: Avena sativa L., Avena fatua L., oat (wild), herbicide tolerance

Oat quality and yield as affected by kernel moisture at swathing

2005 ◽  
Vol 85 (4) ◽  
pp. 839-846 ◽  
Author(s):  
William E. May ◽  
Ramona M. Mohr ◽  
Guy P. Lafond ◽  
F. Craig Stevenson
Keyword(s):  
Moisture Content ◽  
Protein Content ◽  
Key Words ◽  
Avena Sativa ◽  
Oil Content ◽  
Seed Quality ◽  
Kernel Weight ◽  
Test Weight ◽  
High Quality ◽  
Yield And Quality

Increased demand for high-quality oat has rekindled interest in improving oat (Avena sativa L.) yield and quality by managing the timing of oat swathing. The objective of this study was to determine the effect of swathing at five levels of kernel moisture on yield and seed quality at Indian Head, SK, and Brandon, MB, from 1997 (Indian Head only) to 2000. The largest benefit to yield and quality was achieved when swathing was delayed from 50 to 41% kernel moisture. Kernel weight, plump seed and groat yield were optimized when kernel moisture was between 36 and 30% moisture content. Dockage, protein content and oil content also improved with later swathing dates. Swathing should not begin until a kernel moisture content of 41% has been reached. After 30% kernel moisture was reached, no improvement in oat yield and quality occurred when swathing was delayed any further. Key words: Avena sativa L., test weight, thin seed, groat yield, protein, germination

EFFECT OF KERNEL MOISTURE CONTENT AT HARVEST AND WINDROW VS. ARTIFICIAL DRYING ON QUALITY AND GRADE OF OATS

1982 ◽  
Vol 62 (4) ◽  
pp. 845-854 ◽  
Author(s):  
JOHN M. CLARKE ◽  
GREG E. RIEMER ◽  
JOHN V. CHRISTENSEN ◽  
WILLIAM G. LEGGE
Keyword(s):  
Moisture Content ◽  
Avena Sativa ◽  
Field Experiments ◽  
Kernel Weight ◽  
Test Weight ◽  
Grain Protein ◽  
Drying Method ◽  
Commercial Grade ◽  
Moisture Contents ◽  
Forced Air

Field experiments with the oat (Avena sativa L.) cultivars Random Harmon and Kelsey were conducted for 3 yrs at Swift Current, Saskatchewan, for 2 yr at Saskatoon, Saskatchewan, and for 3 yr with cultivars Random, Cascade and Athabasca at Beaverlodge, Alberta. Plots were harvested at kernel moisture contents (KMC) in the range of 15–45%. At Swift Current and Beaverlodge, material was dried in the field (windrowed) or artificially dried in a forced-air oven at 50 °C after threshing; all Saskatoon material was field-dried. Test weight, 1000-kernel weight, grain protein-N and commercial grade were determined. Grain protein-N was not affected by cutting time or drying method. Test weight of both windrowed and artificially dried material tended to increase as harvest was delayed until lower KMC values were reached. One-thousand-kernel weight was less affected by harvest KMC, but did increase as harvest was delayed until 35% KMC in some situations. Material cut at high KMC at Swift Current and Saskatoon was downgraded due to high proportions of green kernels, and in some instances, due to low test weight. The proportion of green kernels tended to be greater in the artificially dried than in the windrowed material at high harvest KMC values. The no.1 CW grade was not reached unless harvest was delayed until KMC was less than 20%, provided that there was no secondary tillering. Mildew and staining were major grading factors at Beaverlodge during 2 yr. particularly in the windrowed treatments. Grades tended to be higher in artificially dried material when rain occurred during the harvest period. Intrapanicle differences in maturation, which produce the varying proportions of green and mature kernels, were demonstrated in excised panicles using eosin dye and 14C-sucrose.

Management of wild oat (Avena fatua L.) in tame oat (Avena sativa L.) with early seeding dates and high seeding rates

2009 ◽  
Vol 89 (4) ◽  
pp. 763-773 ◽  
Author(s):  
W E May ◽  
S J Shirtliffe ◽  
D W McAndrew ◽  
C B Holzapfel ◽  
G P Lafond
Keyword(s):  
Grain Yield ◽  
Avena Sativa ◽  
Test Weight ◽  
Wild Oat ◽  
Seeding Rate ◽  
Yield And Quality ◽  
Seeding Date ◽  
Grain Yield And Quality ◽  
Oat Biomass ◽  
Density Treatment

Traditionally, farmers have delayed seeding to manage wild oat (Avena fatua L.) in tame oat (Avena sativa L.) crops, but this practice can adversely affect grain yield and quality. The objectives of this study were: (1) to evaluate the effectiveness of using high seeding rates with early-seeded oat to maintain grain yield and quality, and (2) to determine an optimum seeding rate to manage wild oat and maximize grain yield and quality. The factors of interest were wild oat density (low and high density), seeding date (early May, mid May, early June and mid June), and tame oat seeding rate (150, 250, 350 and 450 viable seeds m-2). The study was conducted at Indian Head and Saskatoon, SK, in 2002, 2003 and 2004, at Winnipeg, MB, in 2002, and at Morden, MB, in 2003 and 2004. Wild oat biomass, wild oat panicle density and wild oat seed in the harvested sample decreased as seeding rate increased, while tame oat biomass and grain yield increased. Wild oat density ranged between 0 and 100 plants m-2 with averages of 10 plants m-2 in the low density treatment and 27 plants m-2 in the high density treatment. At low seeding rates, grain yield decreased with increasing wild oat density. The difference in grain yield between the two wild oat densities decreased as the seeding rate increased. There was a curvilinear decrease in grain yield as seeding was delayed. A seeding date × seeding rate interaction was noted for test weight, plump seed, thin seed and groat yield. Seed quality improved as seeding rate increased for only the mid-June seeding date. Even though the mid-June test weight increased as the seeding rate increased it was always lower than the early May test weight at any seeding rate. The results from this study established that in the presence of wild oats, early seeding of tame oat is possible providing high seeding rates, 350 plants m-2 are used.Key words: Wild oat competition, wild oat density, wild oat biomass, grain yield, grain quality

Ear moisture during kernel development as influenced by field and laboratory selection

1995 ◽  
Vol 75 (3) ◽  
pp. 557-563 ◽  
Author(s):  
H. Z. Cross
Keyword(s):  
Moisture Content ◽  
Field Study ◽  
Agronomic Traits ◽  
Grain Filling ◽  
Kernel Weight ◽  
Test Weight ◽  
Mass Selection ◽  
Dry Matter Accumulation ◽  
Drying Characteristics ◽  
Laboratory Selection

Grain quality, timeliness of harvest, and profitability can be increased by improving field drying characteristics of maize (Zea mays L.) hybrids. To better understand hows genes control ear drying, I compared maize strains developed by divergently selecting three cycles for (1) high HM or low LM moisture content at 45 d post pollination in the field or (2) fast FD vs. slow ear drying SD In laboratory. A field study across five locations compared HM, LM, FD, and SD strains from each of five synthetics for grain yield, ear moisture at harvest, test weight, lodging, and other agronomic traits. I studied ear moisture during grain filling for two subsets of divergently selected strains from one and three synthetics for 2 yr. In a third 2-yr field study, I measured mature kernel weight, lag period duration (LPD), effective grain-filling period (EFPD), and rate of dry matter accumulation (RDMA) for LM and HM strains developed from each of four synthetics. When averaged across the five synthetics, both SD and LM selections produced equivalent yields but lower ear moisture at harvest than the corresponding divergent strains. The LM strains had higher test weights than HM strains. When averaged across three synthetics and 2 yr, the HM strains produced higher moisture than LM strains at 15, 30, 45, and 60 d after silking. However, environments also influenced moisture content of the kernels during grain filling. In three of the four synthetics studied, HM strains had heavier kernels than corresponding LM strains. The heavier kernels seem to be due to increased RDMA. When averaged across four synthetics, LM strains had shorter LPD than HM strains. These correlated selection responses suggest that a genetic association exists among moisture content during grain filling, moisture content at physiological maturity, moisture content at harvest, LPD, and test weight. Breeding for LM or SD should improve field-drying characteristics of maize without increasing stalk breakage or decreasing yields. Key words:Zea mays L., grain filling, dry-down rates, mass selection, breeding methods

Effect of leaf spotting diseases on grain yield and seed traits of wheat in southern Saskatchewan

2002 ◽  
Vol 82 (3) ◽  
pp. 507-512 ◽  
Author(s):  
H. Wang ◽  
M. R. Fernandez ◽  
F. R. Clarke ◽  
R. M. DePauw ◽  
J. M. Clarke
Keyword(s):  
Grain Yield ◽  
Protein Concentration ◽  
Flag Leaf ◽  
Kernel Weight ◽  
Test Weight ◽  
Grain Protein ◽  
Seed Traits ◽  
Grain Protein Concentration ◽  
Leaf Emergence ◽  
Weight Test

Although leaf spotting diseases have been reported to have a negative effect on grain yield and seed characteristics of wheat (Triticum spp.), the magnitude of such effects on wheat grown on dryland in southern Saskatchewan is not known. A fungicide experiment was conducted at Swift Current (Brown soil) and Indian Head (Black soil) from 1997 to 1999 to determine the effect of leaf spotting diseases on yield and seed traits of wheat. Two fungicides, Folicur 3.6F and Bravo 500, were applied at different growth stages on three common wheat (Triticum aestivum L.) and three durum wheat (T. turgidum L. var durum) genotypes. Fungicide treatments generally did not affect yield, kernel weight, test weight or grain protein concentration, and these effects were relatively consistent among genotypes. Folicur applied at head emergence in 1997 and at flag leaf emergence and/or head emergence in 1998 increased yield at Indian Head (P < 0.05). Fungicides applied at and before flag leaf emergence tended to increase kernel weight. Grain protein concentration increased only in treatments of Bravo applications at Indian Head in 1998. These results suggested that under the dryland environment and management in southern Saskatchewan leaf spotting diseases generally have a small effect on yield, kernel weight, test weight and protein concentration. Key words: Wheat, leaf spotting diseases, fungicide, yield

Triticale (X Triticosecale Wittmack) Response to Herbicides

1994 ◽  
Vol 8 (1) ◽  
pp. 119-123 ◽  
Author(s):  
Alan C. York ◽  
Stewart M. Turner ◽  
Ronald E. Jarrett
Keyword(s):  
Plant Height ◽  
Kernel Weight ◽  
Grain Weight ◽  
Test Weight ◽  
X Triticosecale ◽  
Affected Plant ◽  
Yield Test ◽  
Triticosecale Wittmack ◽  
X Triticosecale Wittmack

The response of ‘Florico,’ ‘Victoria,’ and 'Stan II’ triticale to 2,4-D, dicamba, 2,4-D plus dicamba, diclofop, and thifensulfuron plus tribenuron applied POST during the tillering stage was examined. At rates twice those recommended for application to wheat, Victoria and Stan II were not injured, and injury to Florico was less than 10%. None of the herbicides or combinations adversely affected plant height at maturity, tiller or spike production, grain weight/spike, kernel weight, kernels/spike, yield, or test weight of any cultivar. Cultivars varied in tiller production, height, yield, test weight, kernel weight, and kernels/spike.

scholarly journals UPLC-MS/MS Determination of Linezolid and Heme in Plasma of Infected Patients and Correlation Analysis

2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Yingying Wang ◽  
Xuemei Ye ◽  
Qin Lan ◽  
Xiaofang Ke ◽  
Lufeng Hu ◽  
...  
Keyword(s):  
Correlation Analysis ◽  
Healthy Subjects ◽  
Haematological Toxicity ◽  
Diagnostic Value ◽  
High Concentration ◽  
High Positive Correlation ◽  
Positive Correlation ◽  
Early Diagnose ◽  
The Relationship

Linezolid can cause serious haematological toxicity, such as thrombocytopenia and aneamia. Heme, composed of iron and porphyrin, is an important component of hemoglobin. In order to investigate the relationship between the concentration of linezolid and heme in the plasma of infected patients, a UPLC-MS/MS method that can determine the concentrations of linezolid and heme simultaneously was developed and validated. A total of 96 healthy subjects and 81 infected patients, who received blood routine blood tests, were included and determined by the UPLC-MS/MS method. The results showed that the concentration of linezolid was 5.08 ± 3.46   μ g / mL in infected patients who were treated with linezolid. The heme in healthy subjects was 7.05 ± 8.68   μ g / mL , and it was significantly decreased to 0.88 ± 0.79   μ g / mL in infected patients ( P < 0.01 ). Spearman correlation analysis showed that linezolid had a high negative correlation with platelet (PLT) ( R = − 0.309 ). Heme had a high positive correlation with hemoglobin (Hb) ( R = 0.249 ) in healthy subjects and infected patients. The ROC analysis showed that heme had diagnostic value to distinguish low Hb (110 g/L). In conclusion, there was a positive correlation between heme and Hb, and this correlation was also observed in infected patients. A high concentration of linezolid was inclined to decrease PLT. Monitoring of heme and linezolid helps in the early diagnose of low Hb and PLT.

Sign in / Sign up

Export Citation Format

Share Document