Halothane genotype by weight interactions on lean yield from pork carcasses

1991 ◽  
Vol 71 (3) ◽  
pp. 633-643 ◽  
Author(s):  
A. P. Sather ◽  
S. D. M. Jones ◽  
A. K. W. Tong
Keyword(s):  
Key Words ◽  
Carcass Composition ◽  
Carcass Weight ◽  
Apparent Increase ◽  
Slaughter Weight ◽  
Weight Range ◽  
Yorkshire Pigs ◽  
Dressing Percentage ◽  
Relative Differences ◽  
Crossbred Pigs

Data on 42 halothane-sensitive pigs (HSL, nn-genotype), 169 Lacombe pigs (LAC, NN-genotype), 41 crossbred pigs (XBD, Nn-genotype), and 72 Yorkshire pigs (YRK, NN-genotype) representing 145 gilts and 179 castrates, were obtained over the liveweight range from 74.0 to 134.5 kg (average 105 kg) to examine the effect of genotype, gender and slaughter weight on the composition of the four lean cuts (ham, loin, picnic and butt). Gilts had a greater proportion of dissectible lean from lean cuts than castrates (557 ± 2.8 vs. 525 ± 2.6 g kg−1). The HSL pigs had the highest and LAC pigs the lowest commercial dressing percentage, increasing respectively from 85.3 to 86.0% and 79.7 kg to 82.6% as slaughter weight increased from 80 to 130 kg. Corresponding figures for XBD and YRK pigs, were 82.5 to 85.4 and 80.6 to 84.6%, respectively. Dissectible lean from lean cuts from 65-kg carcasses was 606, 525, 536 and 575 g kg−1 for HSL, XBD, LAC and YRK pigs, respectively. Corresponding figures for 85-kg and 105-kg carcasses were 574, 525, 515, and 555 g kg−1 and 542, 525, 494, and 535 g kg−1, respectively from HSL, XBD, LAC and YRK pigs. LAC and YRK pigs, each with exclusively NN-genotypes but differing in composition of lean cuts, maintained their relative differences in composition over the weight range studied. Heterogeneity of slopes for changes in proportion of lean in the lean cuts with increasing weight among the HSL, XBD and LAC pigs implied a genotype × weight interaction that could best by explained by an apparent increase in the dominance of the halothane gene with increasing carcass weight. Key words: Swine, carcass composition, halothane gene, weight, Lacombe, Yorkshire

CARCASS COMPOSITION OF YORKSHIRE BARROWS AND GILTS SLAUGHTERED BETWEEN 85 and 112 KG BODY WEIGHT

1982 ◽  
Vol 62 (1) ◽  
pp. 69-76 ◽  
Author(s):  
ANDRÉ FORTIN
Keyword(s):  
Body Weight ◽  
Carcass Composition ◽  
Chemical Compositions ◽  
Ether Extract ◽  
Protein Percentage ◽  
Slaughter Weight ◽  
Yorkshire Pigs ◽  
Intermuscular Fat ◽  
The Right ◽  
Physical And Chemical

Thirty-two Yorkshire pigs, 16 barrows and 16 gilts, were slaughtered at four weights (85, 92, 103 and 112 kg) to determine the effect of body weight at slaughter on the physical and chemical composition of the carcass. The right side was dissected into meat (including intra- and intermuscular fat), separable fat and bone which were subsequently analyzed for moisture, protein (N × 6.25), ether extract and ash. Sex did not influence (P < 0.05) carcass composition at any of the four slaughter weights. Increasing slaughter weight did not markedly alter the meat percentage of the carcass side but decreased the percentage of bone (P < 0.01). A trend toward an increasing percentage of separable fat was confirmed by the use of the allometric function Y = aXb. The effect of slaughter weight was more pronounced on the chemical than on the physical composition of the carcass side especially with respect to protein percentage. The chemical compositions of the meat, separable fat and bone were also determined. The protein percentage of each of the three physically separable components of the carcass side decreased (P < 0.01) with increasing slaughter weight. The partitioning of the chemically determined components among meat, separable fat and bone was not influenced by sex or by slaughter weight. Key words: Carcass composition, swine, sex, slaughter weight

scholarly journals The effect of slaughter age and sex class to carcass characteristic of Red Brahman Crossbred Cattle

2021 ◽  
Vol 888 (1) ◽  
pp. 012028
Author(s):  
S S C Maulid ◽  
A Susilo ◽  
D Purwanto ◽  
Kuswati
Keyword(s):  
Carcass Weight ◽  
Duncan Multiple Range Test ◽  
Crossbred Cattle ◽  
Slaughter Weight ◽  
Carcass Characteristic ◽  
Slaughter Age ◽  
Fat Thickness ◽  
Dressing Percentage ◽  
Range Test ◽  
Age And Sex

Abstract This research was conducted to examine the effect of slaughter age and sex class to carcass characteristic from Red Brahman Crossbred Cattle. The research materials were 126 heads (grouped by slaughter age (<1,5 years, 2-2,5 years, and 3 years) and sex class (bull and steer)) with taken from KASA Company, rested for 12-24 hours, and slaughtered in AM FARM abattoir with halal MUI slaughter methods. The research method was used field experiment. The data of research were analysis by using Complete Randomized Factorial Design (2X3) and Duncan Multiple Range Test if there were differences. Parameters of carcass characteristic were slaughter weight, hot carcass weight, dressing percentage, carcass components percentage (meat, bone, fat), MBR, MFR, rib eyes area, and 12th fat thickness of ribs. The results of this research showed that slaughter age and sex class has significantly (P<0,05) affect to slaughter weight and hot carcass weight. Interactions of slaughter age and sex class has significantly (P<0,05) affect dressing percentage, bone and meat percentage, MBR and MFR, and has not significant (P>0,05) rib eyes area and fat thickness. From these results, it can be concluded that slaughter age and sex class affect carcass characteristics of Red Brahman Crossbred Cattle.

scholarly journals Canonical correlation analysis of body measurements and carcass traits of cross bred rabbit population

2012 ◽  
Vol 28 (4) ◽  
pp. 855-861 ◽  
Author(s):  
D.M. Ogah
Keyword(s):  
Correlation Analysis ◽  
Body Length ◽  
Canonical Correlation Analysis ◽  
Canonical Correlation ◽  
Carcass Traits ◽  
Carcass Weight ◽  
Body Measurements ◽  
Slaughter Weight ◽  
Dressing Percentage ◽  
Criterion Variables

In this study, canonical correlation analysis was applied to estimate the relationship between body measurements and carcass traits of 28 male cross bred rabbits of about 12 weeks of age, reared under semi intensive system. Four body measurements, pre-slaughter weight (PSW) , body length (BL), chest circumference (CC), and ear length (EL) as predictor variable while dressing percentage ( DP) , hot carcass weight (HCW) and cold carcass weight (CCW) as criterion variables. Pre-slaughter weight and body length had significant (P<0.001) simple correlation coefficients with the carcass traits except for dressing percentage. The three canonical variate pairs ranged between .99 to .42 and only the first pair was significant (P<0.001). From the analysis pre-slaughter weight and body length can be regarded as the main factors as live measurement traits, while dressing percentage did not have pronounced effect on the emerged criterion variables.

The prediction of pork carcass composition using live animal echographic measurements from the Krautkramer USK7, Ithaca Scanoprobe 731C and Aloka SSD-210DXII Echo Camera

1991 ◽  
Vol 71 (4) ◽  
pp. 1001-1009 ◽  
Author(s):  
A. P. Sather ◽  
J. A. Newman ◽  
S. D. M. Jones ◽  
A. K. W. Tong ◽  
S. M. Zawadski ◽  
...  
Keyword(s):  
Key Words ◽  
Real Time ◽  
Live Weight ◽  
Carcass Composition ◽  
Residual Variance ◽  
Improvement Program ◽  
Live Animal ◽  
Ultrasonic Measurements ◽  
Yorkshire Pigs ◽  
Fat Yield

Live animal ultrasonic measurements of back fat depth and muscle depth were made on 130 Lacombe and 96 Yorkshire pigs within a weight range of 85.5–114.2 kg, using a Krautkramer USK7 (KK), an Ithaca Scanoprobe 731C (SC) and an Aloka SSD-210DXII Echo Camera (AEC), with an average carcass weight of 80.8 kg. Animals were assessed 1 d prior to slaughter at the mid-back and the loin site as specified by the Canadian Swine Improvement Program and the carcass grade site. Back fat depth measurements made by the SC, KK and AEC reduced the residual variance for lean yield by an additional 35, 43 and 45%, respectively, beyond adjusting for gender, breed and live weight. The mid-back site had less precision than the loin or grade sites for the prediction of both lean yield and fat yield, and there were no clear advantages for using the loin site in preference to the grade site. Since there are no easily identifiable landmarks for locating the grade site on the live pig, the loin site remains the preferred site for live animal evaluation. The addition of muscle-depth measurements to fat-depth measurements resulted in modest increases in the R2 (1–4%) in precision for the prediction of carcass composition. Differences in the ability of the KK and AEC to predict lean yield were small and, considering their cost, suggest that the application of real-time ultrasonics to live animal evaluation may not be practical at this time. Key words: Swine, ultrasound, lean yield, probe sites

A study on comparison of fattening performances and some slaughter characteristics of Suffolk and German Mutton Merino lambs under intensive fattening conditions

2017 ◽  
Author(s):  
Mikail Arslan ◽  
Orhan Yilmaz ◽  
Huseyin Denk
Keyword(s):  
Feed Efficiency ◽  
Carcass Weight ◽  
Retail Sale ◽  
Slaughter Weight ◽  
Weight Gains ◽  
Dressing Percentage ◽  
Integrated Facility

The study carried out at Dort Mevsim Meat Integrated Facility in Susurluk district, Balikesir province, Turkey. In each genotype, there were 20 male lambs. Suffolk and German Mutton Merino lambs were subjected to fattening for 70 days. At the end of the trial, 6 male lambs from each genotype were slaughtered. Slaughter weight, ADG, concentrate feed efficiency, hot carcass weight, chilling carcass weight, hot dressing percentage and chilling dressing percentage were 43.9 kg, 301 g, 3.44 kg, 23.18 kg, 22.24 kg, 52.80 % and 50.66 % in Suffolk lambs; these values were 43.1 kg, 296 g, 3.86 kg, 21.85 kg, 20.89 kg, 50.70 % and 48.47 % in German Mutton Merino lambs, respectively. Hot and chilling carcass weights of Suffolk and German Mutton Merino lambs were significantly different (P>0.05). The findings of the current study showed that Suffolk lambs tended to have higher hot and chilling carcass weights, although there were no statistical differences between the two genotypes in terms of slaughter weights, average daily weight gains and other slaughter traits. These results also indicate that the carcasses for retail sale from the Suffolk lambs were more in quantity when compared to German Mutton Merino lambs.

Slaughter and carcass traits of calves from first-cross and reciprocal back-cross beef cows

1994 ◽  
Vol 74 (4) ◽  
pp. 621-632 ◽  
Author(s):  
J. A. Newman ◽  
A. K. W. Tong ◽  
S. D. M. Jones ◽  
G. W. Rahnefeld ◽  
D. R. C. Bailey ◽  
...  
Keyword(s):  
Beef Cattle ◽  
Key Words ◽  
Carcass Traits ◽  
Beef Cows ◽  
Carcass Composition ◽  
Carcass Weight ◽  
Back Cross ◽  
Breed Type ◽  
Bone Content

Breed-of-dam and sex-of-calf effects are reported based on observation of 2007 heifer and steer carcasses. The carcasses were derived from Limousin-sired calves born to dams representing 15 F1 and backcross genotypes reared at two locations over a period of 5 yr. The calves represented Hereford × Angus, Charolais × Shorthorn, Simmental × Shorthorn and all backcross combinations involving Charolais or Simmental with Hereford, Angus or Shorthorn. Carcass traits were analyzed on an unadjusted, a constant hot-carcass weight, and a constant rib-fat depth basis. The slaughter criteria dictated that steers were heavier at slaughter than heifers. They also exhibited higher dressing yield, greater longissimus thoracis area, and lower fat depth. Charolais and Simmental breeding was associated with less rib fat depth, greater longissimus thoracis area, a higher proportion of preferred cuts, less dissectible fat, more bone and more lean in the preferred cuts than British beef breeding. Within the European (Charolais and Simmental) and British beef (Hereford, Angus and Shorthorn) breed groups, breed effects were smaller, but for carcass composition traits they were frequently significant. When compared with Simmental, Charolais breeding tended to be associated with less marbling, less rib fat depth, less dissectible fat and more lean in the preferred cuts. Among the British beef breeds, Hereford was associated with the highest proportion of preferred cuts, Shorthorn with the lowest rib fat depth — but the highest dissectible fat — and Angus with the most marbling, the greatest longissimus thoracis area and the lowest bone content. This research has demonstrated that breed effects for carcass composition traits tend to be additive and that a significant effect may be associated with substitution of as little as one-eighth of the breed composition. Key words: Beef cattle, slaughter traits, carcass traits, breed type, crossbred dam, backcross dam

RELATIONSHIPS BETWEEN CARCASS WEIGHTS, BACKFAT AND LOIN MUSCLE DEPTH IN CULL SOWS

1990 ◽  
Vol 70 (4) ◽  
pp. 1141-1145 ◽  
Author(s):  
N. N. AZIZ ◽  
W. A. RAE ◽  
R. O. BALL ◽  
J. W. ALLAN
Keyword(s):  
Key Words ◽  
Frequency Distribution ◽  
Weight Distribution ◽  
Carcass Composition ◽  
Carcass Weight ◽  
Weight Class ◽  
Cull Sows

The carcass weight distribution of the cull sow population was evaluated from 104 456 sows slaughtered in Ontario in 1988. Carcass weight, backfat depth and loin muscle depth were evaluated for 797 additional sows, randomly selected at a commercial abattoir. Approximately 85% of sows were between 100 and 200 kg with 4.5% less than 100 kg and 10.5% more than 200 kg carcass weight. The frequency distribution showed backfat depth was most frequently between 15 and 19.9 mm (26.73%) and 20 and 24.9 mm (29.99%). Sow carcasses are extremely diverse, varying 3- to 9-fold in backfat depth and 2- to 3-fold in loin muscle depth within any 25-kg weight class. Key words: Sows, carcass composition, backfat

scholarly journals Sire breed effect on carcass and temperament traits

2018 ◽  
Vol 39 (6) ◽  
pp. 2717
Author(s):  
Leandro Lunardini Cardoso ◽  
Joal José Brazzale Leal ◽  
Marcelo Henrique Giordano Nunes ◽  
Bruno Borges Machado Teixeira ◽  
Bruna Pena Sollero ◽  
...  
Keyword(s):  
Subcutaneous Fat ◽  
Carcass Weight ◽  
Longissimus Muscle ◽  
Muscle Area ◽  
Slaughter Weight ◽  
Subcutaneous Fat Thickness ◽  
Fat Thickness ◽  
Dressing Percentage ◽  
Productive Traits ◽  
Sire Breed

This paper aimed to identify and evaluate the effects of sire breed on temperament and productive traits of different cross-breeds between Nellore (NE), Tabapua (TB), and Brahman (BR) bulls mated with Angus cows (AN), as well as the relationship between temperament and productive traits. The productive traits measured in this study include slaughter weight and post weaning weight gain. Temperament was assessed by flight-speed (FS). Carcass data collected in this study include hot carcass weight, hot carcass percentage, cold dressing percentage, carcass length, initial pH, ultimate pH, subcutaneous fat thickness and carcass longissimus muscle area. The sire breed effect was greater for slaughter weight. Hot carcass weight was not affected by the sire breed. The longissimus muscle area was larger for AN x TB and AN x NE crossbreeds than for AN x BR crossbreeds. Subcutaneous fat thickness and cold dressing percentage were not affected by sire breed. The offspring of NE, TB, and BR sires mated with AN cows had similar carcass measurements, except for the longissimus muscle area, which was smaller for offspring sired by the Brahman breed. The temperament trait was not influenced by sire breed.

scholarly journals EFFECTS OF BREED OF SIRE AND BREED OF DAM OF COW ON CARCASS CHARACTERISTICS OF THREE-WAY CROSS BEEF CATTLE REARED AT TWO LOCATIONS

1983 ◽  
Vol 63 (4) ◽  
pp. 791-802 ◽  
Author(s):  
G. W. RAHNEFELD ◽  
H. T. FREDEEN ◽  
G. M. WEISS ◽  
J. A. NEWMAN ◽  
J. E. LAWSON
Keyword(s):  
Beef Cattle ◽  
Key Words ◽  
Carcass Characteristics ◽  
Carcass Weight ◽  
Cattle Breeds ◽  
Kidney Fat ◽  
Dressing Percentage ◽  
Carcass Cuts

Carcass characteristics of 3673 steers and heifers born over a 6-yr period 1973–1978 at Brandon, Manitoba (farm conditions) and Manyberries, Alberta (range conditions) were compared. Calves weaned at Manyberries were fed and evaluated at Lacombe. The progeny were out of 10 specific F1 crosses of dams mated to bulls of the Charolais (C), Simmental (S), Limousin (L) and Chianina (Chi) breeds. Dam crosses included the Hereford × Angus (HA) and crosses sired by C, S and L sires out of H, A and Shorthorn (N) dams. Breed of sire of dam effects indicated that progeny from S cross cows generally had the heaviest carcasses S = C > L, the greatest carcass weight per day of age S = C > L, the highest percentage of dissected bone of the round S > C > L and rib S > C = L, the highest proportions of brisket S > L > C and flank S > L = C, and carried more kidney fat (percent liveweight) S > C = L and average rib fat S > C = L. Progeny from Limousin and Charolais cross cows had the highest dressing percentage [Formula: see text] and rib eye area/100 kg carcass wieght L > C > S while those from Limousin cross cows had the highest proportion of long loin and the combined lean cuts (rib, round and long loin) a higher percentage of dissected lean in the round L > C > S and the highest lean-to-bone ratio L > C > S. Progeny from dams of Shorthorn breeding generally had the heaviest carcasses, the greatest carcass weight per day of age, the highest percentage kidney fat and at Brandon the greatest proportions of plate and brisket. Hereford cross dams consistently produced progeny with the highest percentage head H = A > N, hide [Formula: see text], feet H > A = N, percentage bone in the long loin [Formula: see text], round [Formula: see text], and rib [Formula: see text], and the highest percentage lean in the long loin H > N (Brandon) and chuck H > N (Brandon). The progeny from Angus cross dams carried the greatest average rib fat [Formula: see text], had the greatest rib eye area/100 kg carcass weight [Formula: see text], the highest percentage lean in the round [Formula: see text], and the highest lean to bone ratio A > H = N. Key words: Cattle, breeds, carcass, cuts, composition

The prediction of pork carcass composition using the Hennessy Grading Probe and the Aloka SSD-210DXII Echo Camera

1991 ◽  
Vol 71 (4) ◽  
pp. 993-1000 ◽  
Author(s):  
A. P. Sather ◽  
J. A. Newman ◽  
S. D. M. Jones ◽  
A. K. W. Tong ◽  
S. M. Zawadski ◽  
...  
Keyword(s):  
Standard Deviation ◽  
Key Words ◽  
Real Time ◽  
Carcass Composition ◽  
Average Weight ◽  
Similar Data ◽  
Improvement Program ◽  
Muscle Area ◽  
Residual Standard Deviation ◽  
Yorkshire Pigs

Carcasses, with an average weight of 80.8 kg, from 130 Lacombe and 96 Yorkshire pigs were probed for fat and muscle depth at the carcass grade site using the Hennessy Grading Probe (HGP). Similar data were collected by the Aloka SSD-210DXII Echo Camera (AEC) at the carcass grade site and at the Canadian Swine Improvement Program loin and mid-back sites. Muscle-width and muscle-area measurements were also made with the AEC. The R2 (residual standard deviation: RSD), using the HGP, for prediction of carcass lean yield at the grade site using fat and muscle depth was 0.58 (16.4). When fat and muscle depth were measured by the AEC, the R2 (RSD) at the mid-back, loin and grade sites to predict carcass lean yield was 0.41 (19.7), 0.47 (18.5), and 0.53 (17.5), respectively. When the AEC muscle-depth measurements were replaced with muscle-area measurements, the R2 increased (RSD decreased) at the mid-back, loin and grade sites to predict carcass lean yield (0.60 (16.0), 0.64 (15.2), and 0.59 (16.4), respectively). Real-time ultrasound (AEC) provides precision for the prediction of carcass lean content similar to that of the electronic grade probe (HGP). However, combining fat- and muscle-depth measurements made by the HGP with muscle-area measurements made by the AEC at the loin increased the R2 from 58 to 66% for the prediction of carcass lean yield. The suitability of the use of real-time ultrasound as an alternative to electronic grading probes, at this time, appears to be limited. Key words: Swine, real-time ultrasound, carcass grading

Sign in / Sign up

Export Citation Format

Share Document