scholarly journals Performance and Reliability Characterization of 1200 V Silicon Carbide Power MOSFETs and JFETs at High Temperatures

2014 ◽  
Vol 2014 (HITEC) ◽  
pp. 000228-000234
Author(s):  
Jack Flicker ◽  
David Hughart ◽  
Robert Kaplar ◽  
Stanley Atcitty ◽  
Matthew Marinella

1200 V Silicon Carbide (SiC) Metal-Oxide-Semiconductor Field Effect Transistors (MOSFETs) and Junction Field Effect Transistors (JFETs) have been characterized at high operational temperatures. For packaged JFETs obtained from a collaborating manufacturer, the threshold shift (ΔVT) was measured under both static and dynamic voltage stress and, in all cases, was less than 2 mV, which is within the measurement margin of error. Temperatures up to 250°C and stress times as long as 200 hours were evaluated. As a comparison, commercially available SiC MOSFETs demonstrated shifts of up to 300 mV after 30 minutes of static gate stress at 175°C. In addition, results from unpackaged JFET die at temperatures up to 525°C show ΔVT values of less than 10 mV for all stress conditions. Although VT remained unchanged for the duration of the test for both static and dynamic stress conditions, under dynamic stress conditions the JFET packaged parts demonstrated a linear increase in sub-threshold leakage current of around 15.6 nA per hour; in contrast, the MOSFET devices showed an exponential increase in sub-threshold leakage under dynamic stress. The increase in sub-threshold leakage current could be recovered temporarily, but long-term behavior was consistent with cumulative damage.

2005 ◽  
Vol 97 (4) ◽  
pp. 046106 ◽  
Author(s):  
Stephen K. Powell ◽  
Neil Goldsman ◽  
Aivars Lelis ◽  
James M. McGarrity ◽  
Flynn B. McLean

MRS Bulletin ◽  
2005 ◽  
Vol 30 (4) ◽  
pp. 293-298 ◽  
Author(s):  
Jian H. Zhao

AbstractSilicon carbide power field-effect transistors, including power vertical-junction FETs (VJFETs) and metal oxide semiconductor FETs (MOSFETs), are unipolar power switches that have been investigated for high-temperature and high-power-density applications. Recent progress and results will be reviewed for different device designs such as normally-OFF and normally-ON VJFETs, double-implanted MOSFETs, and U-shaped-channel MOSFETs. The advantages and disadvantages of SiC VJFETs and MOSFETs will be discussed. Remaining challenges will be identified.


Sign in / Sign up

Export Citation Format

Share Document