scholarly journals Research Advances in Biosynthesis Mechanism of Ultra-High Adhesive Material - Holdfast

2021 ◽  
Vol 3 (1) ◽  
Author(s):  
Qing Liu ◽  
Chao Zhang ◽  
Dong-Gang Xu
Keyword(s):  
Adhesive Material

Design of a wheeled wall climbing robot based on the performance of bio-inspired dry adhesive material

Robotica ◽  
2021 ◽  
pp. 1-14
Author(s):  
Hongkai Li ◽  
Xianfei Sun ◽  
Zishuo Chen ◽  
Lei Zhang ◽  
Hongchao Wang ◽  
...  
Keyword(s):  
Flat Surface ◽  
Thrust Force ◽  
Adhesion Force ◽  
Structure Design ◽  
Design Parameters ◽  
Climbing Robot ◽  
Adhesive Material ◽  
Ducted Fan ◽  
The Stability ◽  
Belt System

Abstract Inspired by gecko’s adhesive feet, a wheeled wall climbing robot is designed in this paper with the synchronized gears and belt system acting as the wheels by considering both motion efficiency and adhesive capability. Adhesion of wheels is obtained by the bio-inspired adhesive material wrapping on the outer surface of wheels. A ducted fan mounted on the back of the robot supplies thrust force for the adhesive material to generate normal and shear adhesion force whilemoving on vertical surfaces. Experimental verification of robot climbing on vertical flat surface was carried out. The stability and the effect of structure design parameters were analyzed.

scholarly journals Marginal Integrity of Partial Ceramic Crowns Within Dentin With Different Luting Techniques and Materials

2008 ◽  
Vol 33 (5) ◽  
pp. 516-525 ◽  
Author(s):  
F. Schenke ◽  
K-A. Hiller ◽  
G. Schmalz ◽  
M. Federlin
Keyword(s):  
Clinical Relevance ◽  
The Self ◽  
The Other ◽  
Adhesive Material ◽  
Marginal Integrity ◽  
Resin Coating ◽  
Partial Ceramic Crowns ◽  
Relyx Unicem ◽  
Composite Interface ◽  
Ceramic Crowns

Clinical Relevance Resin coating improves the marginal seal of partial ceramic crowns to dentin compared to conventional luting, especially at the dentin/composite interface. However, the self-adhesive material RelyX Unicem shows significantly better marginal integrity than the other materials tested.

The Influence of Agglomerators on Powdering of Chloroprene Rubber PCR-244

2015 ◽  
Vol 1119 ◽  
pp. 334-337
Author(s):  
Xu Ling Wei ◽  
Yu Li Wei ◽  
Guang Bi Gong ◽  
Tao Liang ◽  
Wen Jing Cai ◽  
...  
Keyword(s):  
Sodium Chloride ◽  
Potassium Chloride ◽  
Magnesium Sulfate ◽  
Calcium Chloride ◽  
Aluminum Chloride ◽  
Adhesive Material ◽  
Monovalent Salt ◽  
Chloroprene Rubber ◽  
Direct Condensation

Powdered polychloroprene rubber (PCR-244) was prepared by the direct condensation, and the influence of agglomerator kinds and dosages on powdering of PCR-244 were investigated, including trivalent salt (aluminum chloride), divalent salt (magnesium sulfate, calcium chloride) and monovalent salt (sodium chloride, potassium chloride). The result showed that powder chloroprene rubber could be used as adhesive material that calcium chloride was used as agglomerator.

scholarly journals Microchannel Fabrication Using A Photo-Patternable Adhesive Material for Recording Conformational Changes of KcsA Channel with the Diffracted X-ray Tracking Method

Proceedings ◽  
2018 ◽  
Vol 2 (13) ◽  
pp. 972 ◽  
Author(s):  
Yoshikazu Hirai ◽  
Yasuaki Mori ◽  
Tomoki Tabuchi ◽  
Hirofumi Shimizu ◽  
Toshiyuki Tsuchiya ◽  
...  
Keyword(s):  
Conformational Changes ◽  
Diffraction Spot ◽  
High Resolution Imaging ◽  
Potassium Ion Channel ◽  
Adhesive Material ◽  
Tracking Method ◽  
X Ray ◽  
Sin Membrane ◽  
Resolution Imaging ◽  
Gold Nanocrystal

Diffracted X-ray tracking (DXT) method can trace conformational changes of KcsA potassium ion channel during gating by recording position of diffraction spot from a gold nanocrystal attached to the channel as a movie. For high-resolution imaging under controlled microenvironments for KcsA channels, we report a microfluidic device consisting of two SiN membrane windows bonded with a photo patternable adhesive material. The reduced signal-to-background ratio as well as suitable adhesive material thickness for the microchannel are discussed in the experiment at the synchrotron radiation facility.

scholarly journals The Effect of Nanoparticles in Single Lap Joints Studied by Numerical Analyses

2020 ◽  
Vol 5 (10) ◽  
pp. 1288-1293
Author(s):  
Panagiotis J. Charitidis
Keyword(s):  
Finite Element ◽  
Failure Load ◽  
Tensile Loading ◽  
Lap Joints ◽  
Von Mises Stress ◽  
Adhesive Material ◽  
Element Analysis ◽  
Single Lap Joints ◽  
Epoxy Adhesives ◽  
Von Mises

The present study concerns with the finite element investigation of balanced aluminium single lap joints subjected to tensile loading. Epoxy adhesives were used for bonding having different nanoparticles rate in the epoxy resin (0.5, 1.0, 1.5 and to 2 wt. %, respectively). Two-dimensional (2D) finite element analysis has been employed to determine the peeling stress, von Mises stress, and the shear strain distribution across the midplane of the joints. The results mainly prove that the nanoparticles rate in the adhesive material directly affects the joint tensile strength. Nanocomposite adhesives present a higher failure load than that of neat adhesives. Furthermore, nanocomposite adhesive with 0.5 wt. % of nanoparticles generated strengths (shear and peeling strengths) more than neat adhesives, after which decreased by further addition of the nanoparticles.

scholarly journals Synthesis and Properties of Waterborne Polyurethane (WBPU)/Modified Lignin Amine (MLA) Adhesive: A Promising Adhesive Material

2016 ◽  
Author(s):  
Mohammad Mizanur Rahman ◽  
Md. Hasan Zahir ◽  
Han Do Kim
Keyword(s):  
Adhesive Strength ◽  
Weather Conditions ◽  
Waterborne Polyurethane ◽  
Chain Extender ◽  
Mixing Process ◽  
Adhesive Material ◽  
Lignin Amine ◽  
A Chain ◽  
Modified Lignin ◽  
Adhesive Materials

A series of waterborne polyurethane (WBPU)/modified lignin amine (MLA) adhesives was prepared using modified lignin amine (MLA) as a chain extender by a prepolymer mixing process. A successful Mannich reaction was achieved during the synthesis of MLA by reacting lignin with bis(3-aminopropyl)amine. Higher tensile strength, Young’s modulus and thermal stability were recorded for WBPU/MLA adhesives with higher MLA contents. The WBPU/MLA adhesive materials were used to coat PVC substrates. The adhesive strength increased with increasing MLA content. More importantly, the MLA also enhanced the WBPU/MLA coating in terms of adhesive strength at moderately high temperatures as well as under natural weather exposed conditions. The adhesive strength was essentially unaffected with 6.48 mole% MLA in the WBPU/MLA coating after exposure to natural weather conditions for 180 days.

Signal Propagation Along Unidimensional Neuronal Networks

2005 ◽  
Vol 94 (5) ◽  
pp. 3406-3416 ◽  
Author(s):  
Ofer Feinerman ◽  
Menahem Segal ◽  
Elisha Moses
Keyword(s):  
Large Scale ◽  
Signal Transmission ◽  
Signal Propagation ◽  
High Amplitude ◽  
Adhesive Material ◽  
One Dimensional ◽  
Calcium Indicator ◽  
Scale Population ◽  
Population Burst ◽  
Linear Signal

Dissociated neurons were cultured on lines of various lengths covered with adhesive material to obtain an experimental model system of linear signal transmission. The neuronal connectivity in the linear culture is characterized, and it is demonstrated that local spiking activity is relayed by synaptic transmission along the line of neurons to develop into a large-scale population burst. Formally, this can be treated as a one-dimensional information channel. Directional propagation of both spontaneous and stimulated bursts along the line, imaged with the calcium indicator Fluo-4, revealed the existence of two different propagation velocities. Initially, a small number of neighboring neurons fire, leading to a slow, small and presumably asynchronous wave of activity. The signal then spontaneously develops to encompass much larger and further populations, and is characterized by fast propagation of high-amplitude activity, which is presumed to be synchronous. These results are well described by an existing theoretical framework for propagation based on an integrate-and-fire model.

A Novel Photosensitive Polyimide Adhesive Material for Hybrid Bonding Processing

2021 ◽  
Author(s):  
Satoshi Yoneda ◽  
Kenya Adachi ◽  
Kaori Kobayashi ◽  
Daisaku Matsukawa ◽  
Mamoru Sasaki ◽  
...  
Keyword(s):  
Adhesive Material
Sign in / Sign up

Export Citation Format

Share Document