scholarly journals Determination of economic efficiency of using biogas in the conditions of industrial enterprises

2019 ◽  
pp. 12
Author(s):  
Kovalenko Viktor
Keyword(s):  
Natural Gas ◽  
Initial Conditions ◽  
Cost Effective ◽  
Fuel Mixture ◽  
Metallurgical Industry ◽  
Economic Feasibility ◽  
Economic Indicators ◽  
Power Equipment ◽  
Industrial Enterprises ◽  
Heating Furnaces

To determine the efficiency of biogas use in the existing industrial enterprises of the metallurgical industry of Ukraine and Zaporizhia region, in particular, the basic economic indicators of conversion of standard furnace equipment to biogas mixtures from various derivatives and sources available in the region are calculated. The technical feasibility and economic feasibility of using biogas mixtures as an alternative fuel for energy supply of thermal and heating furnaces of industrial enterprises on the example of a real object are determined. It is shown that to use low-calorie fuel in power equipment, taking into account its quality indicators, it is expedient both separately and in combination with traditional energy sources. It is revealed that the economic indicators of projects for the introduction of biogas technologies at metallurgical enterprises differ depending on many initial conditions, such as: sources of origin and chemical composition of biogas; characteristics of power equipment that is converted to such fuel; the proportion of natural gas substitution in the fuel mixture; etc. Based on the trend of constant growth in the cost of traditional energy resources, the introduction and use of their alternative and renewable counterparts in energy-intensive metallurgical enterprises is relevant and, with the right approach, cost-effective Keywords: energy efficiency, biogas technologies, biogas, natural gas, purification, enrichment, industrial furnaces, economic feasibility

scholarly journals Features of introduction of biogas technologies in the conditions of industrial enterprises of the metallurgical industry

2019 ◽  
pp. 49-54
Author(s):  
Kovalenko Viktor ◽  
Kuznetsova Alisa ◽  
Kuznetsov Vitalii
Keyword(s):  
Calorific Value ◽  
Metallurgical Industry ◽  
Economic Feasibility ◽  
Point Of View ◽  
Iron Sulfate ◽  
Economic Point ◽  
Advantages And Disadvantages ◽  
Industrial Enterprises ◽  
Heating Furnaces ◽  
Wide Range

The paper analyzes and classifies the advantages and disadvantages of existing technologies for cleaning hydrogen sulfide and increasing calorific value by enriching biogas mixtures from various sources. Among them are identified those that are most acceptable from an economic point of view for implementation in heavy industry. A list of available methods and relatively inexpensive reagents for the treatment of biogas in the conditions of metallurgical enterprises, among which technical and ammonia water, waste from steel pickling processes in the form of iron sulfate, and others, is established. The main fuel characteristics of biogas of various origin and composition and natural gas are compared in determining the directions of using alternative fuel in industrial heating plants. It was determined that thermal and heating furnaces have the greatest potential for adaptation to biogas combustion, since such units are able to work in a wide range of quality, fuel consumption and calorific value. Since the scientific base regarding the possible conversion of these plants to biogas is unstructured, and in many aspects is absent, the creation of appropriate methods, mathematical apparatus and algorithmic tools in this direction is an urgent task. Keywords: energy efficiency, biogas technologies, biogas, gas, purification, enrichment, industrial furnaces, economic feasibility

Using a Concentrating Solar Reactor to Produce Hydrogen and Carbon Black via Thermal Decomposition of Natural Gas: Feasibility and Economics

2003 ◽  
Vol 125 (2) ◽  
pp. 159-164 ◽  
Author(s):  
Pamela L. Spath ◽  
Wade A. Amos
Keyword(s):  
Thermal Decomposition ◽  
Energy Balance ◽  
Natural Gas ◽  
Carbon Black ◽  
Material Balance ◽  
Cost Effective ◽  
Economic Feasibility ◽  
Solar Reactor ◽  
Effective Manner ◽  
Field Area

Producing hydrogen in a cost-effective manner while minimizing environmental impacts is a big challenge. Hydrogen can be generated with carbon as a by-product from thermal decomposition of natural gas. A system using a solar reactor to produce hydrogen on-site for fueling stations was examined for its technical and economic feasibility. Integrated energy and material balance calculations were made to determine the amount of hydrogen that could be produced from a given reactor size and heliostat field area. Hourly solar data were applied to the model to properly estimate real storage requirements. This paper gives the results of the study including the greenhouse gas emissions and energy balance.

scholarly journals Economic Evaluation of Wind Energy as an Alternative to Natural Gas Powered Irrigation

2010 ◽  
Vol 42 (2) ◽  
pp. 277-287 ◽  
Author(s):  
Bridget L. Guerrero ◽  
Stephen H. Amosson ◽  
Thomas H. Marek ◽  
Jeffrey W. Johnson
Keyword(s):  
Natural Gas ◽  
Alternative Energy ◽  
Irrigation System ◽  
Cost Effective ◽  
Sprinkler System ◽  
Economic Feasibility ◽  
Policy Changes ◽  
Agricultural Producers ◽  
Alternative Energy Sources ◽  
Natural Gas Prices

High natural gas prices have agricultural producers searching for alternative energy sources for irrigation. The economic feasibility of electric and hybrid (electric/wind) systems are evaluated as alternatives to natural gas powered irrigation. Texas Panhandle and Southern Kansas farms are assessed with a quarter-mile sprinkler system, three crops, and two pumping lifts. Breakeven points identify the price at which conversion from a natural gas irrigation system to an electric or hybrid system is cost effective. Results indicate electricity is a more feasible energy source for irrigation and policy changes such as net metering are necessary to make hybrid systems viable.

scholarly journals Multicriteria Analysis for Retrofitting of Natural Gas Melting and Heating Furnaces for Sustainable Manufacturing and Industry 4.0

2019 ◽  
Vol 142 (2) ◽  
Author(s):  
Álvaro J. Arnal ◽  
Maryori Díaz-Ramírez ◽  
Luis Acevedo ◽  
Víctor J. Ferreira ◽  
Tatiana García-Armingol ◽  
...  
Keyword(s):  
Life Cycle ◽  
Natural Gas ◽  
Life Cycle Cost ◽  
Energy Recovery ◽  
New Technologies ◽  
Multicriteria Analysis ◽  
Economic Feasibility ◽  
Heating Furnaces ◽  
Impact Reduction ◽  
Current State

Abstract Different retrofitting measures can be implemented at different levels of the industrial furnace, such as refractory layers, energy recovery solutions, new burners and fuel types, and monitoring and control systems. However, there is a high level of uncertainty about the possible implications of integrating new technologies, not only in the furnace but also on the upstream and downstream processes. In this regard, there is a lack of holistic approaches to design the optimal system configurations under a multicriteria perspective, especially when innovative technologies and multi-sectorial processes are involved. The present work proposes a holistic approach to natural gas melting and heating furnaces in energy-intensive industries. A multicriteria analysis, based on criteria and subcriteria, is applied to select the most profitable retrofitting solution using the analytic hierarchy process and stakeholder expertise. The methodology is based on technical indicators, i.e., life cycle assessment, life cycle cost, and thermoeconomic analysis, for evaluating the current state of existing natural gas furnaces. Once the current state is characterized, the methodology determines the potential of efficiency improvement, environmental impact reduction, and cost-savings caused mainly by the implementation of new retrofitting solutions including new refractories, new burner concepts (co-firing), and innovative energy recovery solutions based on phase change materials. Therefore, this methodology can be considered as the first stage that guarantees technical, environmental, and economic feasibility in evaluating the effects of new technologies on the overall system performance.

Estimating Laminar Flame Speed and Ignition Delay for a Series of Natural Gas Mixtures at IC Engine-Relevant Conditions

2019 ◽  
Vol 142 (6) ◽  
Author(s):  
Kelsey Fieseler ◽  
Taylor Linker ◽  
Mark Patterson ◽  
Daniel Rem ◽  
Timothy J. Jacobs
Keyword(s):  
Natural Gas ◽  
Ignition Delay ◽  
Laminar Flame ◽  
Initial Conditions ◽  
Initial Pressure ◽  
Fuel Mixture ◽  
Flame Speed ◽  
Laminar Flame Speed ◽  
Ic Engine ◽  
The Impact

Abstract Two equations are developed to estimate laminar flame speed and ignition delay for different alkane mixtures at a range of engine-relevant conditions. Fuel mixtures of methane, ethane, propane, butane, and pentane were selected by analyzing the natural gas composition in a natural gas pipeline located in the Midwestern United States. The laminar flame speed and ignition delay were calculated for each mixture at each set of conditions using Cantera, a chemical kinetics solver. The range of initial conditions for laminar flame speed includes temperatures from 300 to 700 K, pressures from 1 to 40 bar, equivalence ratios from 0.4 to 1.2, and residual fractions from 0% to 20%. These data were then fit to a non-linear regression. The range of initial conditions for the ignition delay equation includes temperatures from 1100 to 2000 K, pressures from 1 to 40 bar, equivalence ratios from 0.4 to 1.15, and residual fractions from 0% to 20%. These data were fit to a previously developed equation. Sensitivity studies were conducted on each equation to quantify the impact of the independent variables on the target variable. This showed that, for laminar flame speed, the initial pressure, temperature, and equivalence ratio had the largest impact, with fuel composition having a lesser impact. For ignition delay, the temperature and pressure were shown to have the largest impact. There is a room for improvement, namely, increasing the fuel mixture variability and range of initial conditions, and developing a better fit to the data.

Effect of Chemical Hythane Composition on Pressure in Combustion Chamber of Engine

2019 ◽  
pp. 36-42
Author(s):  
A. P. Shaikin ◽  
I. R. Galiev
Keyword(s):  
Natural Gas ◽  
Combustion Chamber ◽  
Power Plants ◽  
Engine Speed ◽  
Combustion Engine ◽  
Fuel Mixture ◽  
Maximum Pressure ◽  
Chamber Volume ◽  
Excess Air ◽  
Scientific Papers

The article analyzes the influence of chemical composition of hythane (a mixture of natural gas with hydrogen) on pressure in an engine combustion chamber. A review of the literature has showed the relevance of using hythane in transport energy industry, and also revealed a number of scientific papers devoted to studying the effect of hythane on environmental and traction-dynamic characteristics of the engine. We have studied a single-cylinder spark-ignited internal combustion engine. In the experiments, the varying factors are: engine speed (600 and 900 min-1), excess air ratio and hydrogen concentration in natural gas which are 29, 47 and 58% (volume).The article shows that at idling engine speed maximum pressure in combustion chamber depends on excess air ratio and proportion hydrogen in the air-fuel mixture – the poorer air-fuel mixture and greater addition of hydrogen is, the more intense pressure increases. The positive effect of hydrogen on pressure is explained by the fact that addition of hydrogen contributes to increase in heat of combustion fuel and rate propagation of the flame. As a result, during combustion, more heat is released, and the fuel itself burns in a smaller volume. Thus, the addition of hydrogen can ensure stable combustion of a lean air-fuel mixture without loss of engine power. Moreover, the article shows that, despite the change in engine speed, addition of hydrogen, excess air ratio, type of fuel (natural gas and gasoline), there is a power-law dependence of the maximum pressure in engine cylinder on combustion chamber volume. Processing and analysis of the results of the foreign and domestic researchers have showed that patterns we discovered are applicable to engines of different designs, operating at different speeds and using different hydrocarbon fuels. The results research presented allow us to reduce the time and material costs when creating new power plants using hythane and meeting modern requirements for power, economy and toxicity.

Textured materials with extreme wettability for water harvesting from aerosols

2019 ◽  
Vol 489 (5) ◽  
pp. 478-482
Author(s):  
K. A. Emelyanenko ◽  
S. N. Melnikov ◽  
P. I. Proshin ◽  
A. G. Domantovsky ◽  
A. M. Emelyanenko ◽  
...  
Keyword(s):  
Water Resources ◽  
Specific Surface ◽  
Surface Topography ◽  
Cost Effective ◽  
Water Harvesting ◽  
Water Droplets ◽  
Rational Use ◽  
Industrial Enterprises ◽  
Heat Uptake ◽  
Textured Materials

The creation of methods for complete and cost-effective collection of water droplets from an aerosol which arises as a by-product of the low-potential heat uptake from industrial devices, is one of the key tasks of rational use of water resources contributing to the improvement of the environment near large industrial enterprises. This paper shows how the application of materials with extreme wettability and a specific surface topography in spray separators can significantly increase the efficiency of water collection.

scholarly journals Microgrid as a Cost-Effective Alternative to Rural Network Underground Cabling for Adequate Reliability

Energies ◽  
2018 ◽  
Vol 11 (8) ◽  
pp. 1978 ◽  
Author(s):  
Sanna Uski ◽  
Erkka Rinne ◽  
Janne Sarsama
Keyword(s):  
Case Studies ◽  
Power Supply ◽  
Dairy Farm ◽  
Cost Effective ◽  
Distribution Networks ◽  
Comparison Method ◽  
Economic Benefits ◽  
Economic Feasibility ◽  
Cost Calculation ◽  
Islanded Operation

Microgrids can be used for securing the supply of power during network outages. Underground cabling of distribution networks is another effective but conventional and expensive alternative to enhance the reliability of the power supply. This paper first presents an analysis method for the determination of microgrid power supply adequacy during islanded operation and, second, presents a comparison method for the overall cost calculation of microgrids versus underground cabling. The microgrid power adequacy during a rather long network outage is required in order to indicate high level of reliability of the supply. The overall cost calculation considers the economic benefits and costs incurred, combined for both the distribution network company and the consumer. Whereas the microgrid setup determines the islanded-operation power adequacy and thus the reliability of the supply, the economic feasibility results from the normal operations and services. The methods are illustrated by two typical, and even critical, case studies in rural distribution networks: an electric-heated detached house and a dairy farm. These case studies show that even in the case of a single consumer, a microgrid option could be more economical than network renovation by underground cabling of a branch in order to increase the reliability.

scholarly journals Comparison between Concentrated Solar Power and Gas-Based Generation in Terms of Economic and Flexibility-Related Aspects in Chile

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1063
Author(s):  
Catalina Hernández Moris ◽  
Maria Teresa Cerda Guevara ◽  
Alois Salmon ◽  
Alvaro Lorca
Keyword(s):  
Natural Gas ◽  
Solar Power ◽  
Renewable Energy Sources ◽  
Cost Effective ◽  
Hybrid Plant ◽  
Point Of View ◽  
Concentrated Solar Power ◽  
Economic Point ◽  
Hybrid Plants ◽  
Cost Of Energy

The energy sector in Chile demands a significant increase in renewable energy sources in the near future, and concentrated solar power (CSP) technologies are becoming increasingly competitive as compared to natural gas plants. Motivated by this, this paper presents a comparison between solar technologies such as hybrid plants and natural gas-based thermal technologies, as both technologies share several characteristics that are comparable and beneficial for the power grid. This comparison is made from an economic point of view using the Levelized Cost of Energy (LCOE) metric and in terms of the systemic benefits related to flexibility, which is very much required due to the current decarbonization scenario of Chile’s energy matrix. The results show that the LCOE of the four hybrid plant models studied is lower than the LCOE of the gas plant. A solar hybrid plant configuration composed of a photovoltaic and solar tower plant (STP) with 13 h of storage and without generation restrictions has an LCOE 53 USD/MWh, while the natural gas technology evaluated with an 85% plant factor and a variable fuel cost of 2.0 USD/MMBtu has an LCOE of 86 USD/MWh. Thus, solar hybrid plants under a particular set of conditions are shown to be more cost-effective than their closest competitor for the Chilean grid while still providing significant dispatchability and flexibility.

scholarly journals Solar Integrated Anaerobic Digester: Energy Savings and Economics

Energies ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 4292
Author(s):  
Lidia Lombardi ◽  
Barbara Mendecka ◽  
Simone Fabrizi
Keyword(s):  
Anaerobic Digestion ◽  
Natural Gas ◽  
Economic Analysis ◽  
Thermal Energy ◽  
Economic Feasibility ◽  
Solar Thermal ◽  
Base Case ◽  
Economic Sustainability ◽  
Solar Thermal Energy ◽  
Solar Integration

Industrial anaerobic digestion requires low temperature thermal energy to heat the feedstock and maintain temperature conditions inside the reactor. In some cases, the thermal requirements are satisfied by burning part of the produced biogas in devoted boilers. However, part of the biogas can be saved by integrating thermal solar energy into the anaerobic digestion plant. We study the possibility of integrating solar thermal energy in biowaste mesophilic/thermophilic anaerobic digestion, with the aim of reducing the amount of biogas burnt for internal heating and increasing the amount of biogas, further upgraded to biomethane and injected into the natural gas grid. With respect to previously available studies that evaluated the possibility of integrating solar thermal energy in anaerobic digestion, we introduce the topic of economic sustainability by performing a preliminary and simplified economic analysis of the solar system, based only on the additional costs/revenues. The case of Italian economic incentives for biomethane injection into the natural gas grid—that are particularly favourable—is considered as reference case. The amount of saved biogas/biomethane, on an annual basis, is about 4–55% of the heat required by the gas boiler in the base case, without solar integration, depending on the different considered variables (mesophilic/thermophilic, solar field area, storage time, latitude, type of collector). Results of the economic analysis show that the economic sustainability can be reached only for some of the analysed conditions, using the less expensive collector, even if its efficiency allows lower biomethane savings. Future reduction of solar collector costs might improve the economic feasibility. However, when the payback time is calculated, excluding the Italian incentives and considering selling the biomethane at the natural gas price, its value is always higher than 10 years. Therefore, incentives mechanism is of great importance to support the economic sustainability of solar integration in biowaste anaerobic digestion producing biomethane.

Sign in / Sign up

Export Citation Format

Share Document