scholarly journals Lipase Production by Solid-State Cultivation of Thermomyces Lanuginosus on By-Products from Cold-Pressing Oil Production

Processes ◽  
2019 ◽  
Vol 7 (7) ◽  
pp. 465 ◽  
Author(s):  
Marina Tišma ◽  
Toma Tadić ◽  
Sandra Budžaki ◽  
Marta Ostojčić ◽  
Anita Šalić ◽  
...  
Keyword(s):  
Solid State ◽  
Batch Reactor ◽  
Oil Production ◽  
Cost Effective ◽  
Lipase Production ◽  
Biodiesel Production ◽  
Thermomyces Lanuginosus ◽  
Gel Chromatography ◽  
Cold Pressing ◽  
By Products

This study shows that by-products obtained after cold-pressing oil production (flex oil cake, hemp oil cake, hull-less pumpkin oil cake) could be used as substrates for the sustainable and cost-effective production of lipase when cultivating Thermomyces lanuginosus under solid-state conditions (T = 45 °C, t = 9 days). Lipase showed optimum activity at T = 40 °C. The produced lipase extract was purified 17.03-folds with a recovery of 1% after gel chromatography. Three different batch experiments were performed in order to test the possibility of using the lipase in biodiesel production. Experiments were performed with a commercial, unpurified enzyme, and partially purified lipase with sunflower oil and methanol as substrates in a batch reactor at 40 °C. During the experiments, the operational stability of the enzyme was studied. The obtained results clearly showed that produced crude and purified lipase can be used for biodiesel production, but the process needs some additional optimization. As for operation stability, it was noticed that the commercial enzyme was deactivated after 30 h, while produced crude enzyme remained 8.25% of its activity after 368 h.

scholarly journals Biodiesel Production from Palm Methyl Ester (PME) –Review

2019 ◽  
pp. 64-71
Author(s):  
Aasif Procha
Keyword(s):  
Methyl Ester ◽  
Review Paper ◽  
Batch Reactor ◽  
Environmental Issues ◽  
Biodiesel Production ◽  
Paper Briefly ◽  
Production Methods ◽  
Ci Engines ◽  
By Products ◽  
Palm Methyl Ester

In the era of the increase in globalization, this led to increase in industrialization and motorization. It’s obvious that with the increase in motorization the consumptions of auto fuels had been increased since long. This may lead to a reduction of fuels (diesel & petrol). Also, environmental issues have arisen from the emissions of toxic pollutants and greenhouse gases. Hence, it is necessary to look for an alternate energy source to respond this problem. To overcome this problem the replacer of fuel in CI engines had been introduced, i.e. “biodiesel”. Biodiesel is composed of fatty acid and some vegetable oils. This review paper briefly describes different biodiesel production methods, especially the production of biodiesel using palm methyl ester (PME) oil, by transesterification process. In addition, it also compares the yield of biodiesel produced form mill effluents and palm oil by-products using flask and batch reactor.

scholarly journals Transesterification in Microreactors—Overstepping Obstacles and Shifting Towards Biodiesel Production on a Microscale

Micromachines ◽  
2020 ◽  
Vol 11 (5) ◽  
pp. 457 ◽  
Author(s):  
Martin Gojun ◽  
Matea Bačić ◽  
Anabela Ljubić ◽  
Anita Šalić ◽  
Bruno Zelić
Keyword(s):  
Production Process ◽  
Reaction Path ◽  
Batch Reactor ◽  
Enzymatic Reaction ◽  
Deep Eutectic Solvents ◽  
Biodiesel Production ◽  
Thermomyces Lanuginosus ◽  
Process Equipment ◽  
Enzymatic Transesterification ◽  
Biodiesel Synthesis

Biodiesel, which was earlier used only as an alternative fuel, is now an indispensable component of commercial diesel. Conventional production processes are unable to cope with the increasing demand for biodiesel, and therefore more and more work is being done to intensify the existing processes. The intensification of the biodiesel production process, taking into account the environmental and economic factors, is based on increasing productivity. One way to achieve that is by reducing the volume of production units. The application of the enzymatic reaction path, while reducing the volume of process equipment to the micro-level, has significantly magnified the productivity of the biodiesel production process, which is primarily due to better mass transfer in microsystems. Additional breakthrough is the use of deep eutectic solvents (DES) instead of buffers for enzyme stabilization. In this study, a lipase from Thermomyces lanuginosus (TlL) (both commercial and produced by solid-state fermentation) was used as a catalyst for biodiesel production. Edible and waste sunflower oil, as well as methanol, were used as substrates. The reaction mediums were buffer and DES. The transesterification reaction was carried out in a batch reactor and the emphasis was made on different microreactor configurations. The highest yield of 32% for residence time of only τ = 30 min was obtained in the microreactor system with an emulsion of waste oil and a commercial enzyme suspended in a buffer. This indicates that enzymatic transesterification could be a valuable reaction path for dealing with waste oils. Furthermore, biodiesel synthesis in DES showed somewhat lower yields, but by increasing the water content in the system, the reaction could prove much better results. In the end, the effects of reaction conditions on the volumetric productivity of the process were analyzed.

scholarly journals RECOVERY OF BY-PRODUCTS FROM THE OLIVE OIL PRODUCTION AND THE VEGETABLE OIL REFINING FOR BIODIESEL PRODUCTION

Detritus ◽  
2018 ◽  
Vol In Press (0) ◽  
pp. 1
Author(s):  
Mariana Cruz ◽  
Emanuel Costa ◽  
Manuel Fonseca Almeida ◽  
Maria da Conceição Alvim-Ferraz ◽  
Joana Maia Dias
Keyword(s):  
Olive Oil ◽  
Vegetable Oil ◽  
Oil Production ◽  
Biodiesel Production ◽  
Oil Refining ◽  
Vegetable Oil Refining ◽  
By Products

Urban pollution control strategy: SBR technology to treat agricultural waste from pig farm in Indonesia

2019 ◽  
Vol 2 (2) ◽  
pp. 21
Author(s):  
Lindawati Lindawati
Keyword(s):  
Cost Estimation ◽  
Batch Reactor ◽  
Agricultural Waste ◽  
Cost Effective ◽  
Land Application ◽  
Pig Manure ◽  
Small Scale ◽  
Piggery Wastewater ◽  
Pig Farm ◽  
Number Of Customers

Reduction of food rations and shortages is one of the impacts of the increasing human population. Food sector industries then try to cope with the fast growing number of customers. Agribusiness sector gains its popularity in these recent years, including pig farm. The increase trend of animal farming industry is likely to bring increasing pollution problem unless effective treatment methods are used. The main problems related to the pig farm include odor nuisance and pig manure disposal. The existing land application of piggery wastewater is the traditional way to discharge the wastewater. This may yield in land and water contamination, due to the accumulation of unused nutrients by crop plant. A case study of a large commercial pig farm from Australia is proposed to apply in smaller scale in Indonesia. Operational strategies for the small-scale SBR (Sequencing Batch Reactor) treating piggery effluent were developed based on lab-scale experiments. Due to SBR characteristics, which are money-saving and space-saving, it is very suitable to be applied in urban area. An economic evaluation was made of various process options. The cost estimation showed that SBR is a cost effective process, allowing operational batches to be adjusted to reduce unnecessary aeration cost. A reduction in the aeration cost was achieved by shortening the batch time from 24-h to 8-h. A comparison of three different SBR options showed that smaller size reactors could be more flexible and cost effective when compared with the larger ones.

Solid-state fermentation for enhancing the nutraceutical content of agrifood by-products: Recent advances and its industrial feasibility

2021 ◽  
pp. 100926
Author(s):  
Luis O. Cano y Postigo ◽  
Daniel A. Jacobo-Velázquez ◽  
Daniel Guajardo-Flores ◽  
Luis Eduardo Garcia Amezquita ◽  
Tomás García-Cayuela
Keyword(s):  
Solid State ◽  
Solid State Fermentation ◽  
Recent Advances ◽  
By Products

scholarly journals Rapid Detection and Quantification of Patulin and Citrinin Contamination in Fruits

Molecules ◽  
2021 ◽  
Vol 26 (15) ◽  
pp. 4545
Author(s):  
Sudharsan Sadhasivam ◽  
Omer Barda ◽  
Varda Zakin ◽  
Ram Reifen ◽  
Edward Sionov
Keyword(s):  
High Performance ◽  
Cost Effective ◽  
Hplc Method ◽  
Pear Fruit ◽  
Cost Effective Method ◽  
Fruit Samples ◽  
Pome Fruits ◽  
Reliable Methods ◽  
By Products ◽  
Detection And Quantification

Patulin (PAT) and citrinin (CTN) are the most common mycotoxins produced by Penicillium and Aspergillus species and are often associated with fruits and fruit by-products. Hence, simple and reliable methods for monitoring these toxins in foodstuffs are required for regular quality assessment. In this study, we aimed to establish a cost-effective method for detection and quantification of PAT and CTN in pome fruits, such as apples and pears, using high-performance liquid chromatography (HPLC) coupled with spectroscopic detectors without the need for any clean-up steps. The method showed good performance in the analysis of these mycotoxins in apple and pear fruit samples with recovery ranges of 55–97% for PAT and 84–101% for CTN, respectively. The limits of detection (LOD) of PAT and CTN in fruits were 0.006 µg/g and 0.001 µg/g, while their limits of quantification (LOQ) were 0.018 µg/g and 0.003 µg/g, respectively. The present findings indicate that the newly developed HPLC method provides rapid and accurate detection of PAT and CTN in fruits.

scholarly journals All-Solid-State Potentiometric Ion-Sensors Based on Tailored Imprinted Polymers for Pholcodine Determination

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1192
Author(s):  
Hisham S. M. Abd-Rabboh ◽  
Abd El-Galil E. Amr ◽  
Abdulrahman A. Almehizia ◽  
Ayman H. Kamel
Keyword(s):  
Solid State ◽  
Low Cost ◽  
Cost Effective ◽  
Pharmaceutical Formulations ◽  
Measurement Sensitivity ◽  
Serum Samples ◽  
Multiwalled Carbon ◽  
Imprinted Polymers ◽  
High Measurement ◽  
Liquid Chromatographic

In recent times, the application of the use of ion-selective electrodes has expanded in the field of pharmaceutical analyses due to their distinction from other sensors in their high selectivity and low cost of measurement, in addition to their high measurement sensitivity. Cost-effective, reliable, and robust all-solid-state potentiometric selective electrodes were designed, characterized, and successfully used for pholcodine determination. The design of the sensor device was based on the use of a screen-printed electrode modified with multiwalled carbon nanotubes (MWCNTs) as a solid-contact transducer. Tailored pholcodine (PHO) molecularly imprinted polymers (MIPs) were prepared, characterized, and used as sensory receptors in the presented potentiometric sensing devices. The sensors exhibited a sensitivity of 31.6 ± 0.5 mV/decade (n = 5, R2 = 0.9980) over the linear range of 5.5 × 10−6 M with a detection limit of 2.5 × 10−7 M. Real serum samples in addition to pharmaceutical formulations containing PHO were analyzed, and the results were compared with those obtained by the conventional standard liquid chromatographic approach. The presented analytical device showed an outstanding efficiency for fast, direct, and low-cost assessment of pholcodine levels in different matrices.

scholarly journals Solvent-Free Benzylation of Glycerol by Benzyl Alcohol Using Heteropoly Acid Impregnated on K-10 Clay as Catalyst

Catalysts ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 34
Author(s):  
Devendra P. Tekale ◽  
Ganapati D. Yadav ◽  
Ajay K. Dalai
Keyword(s):  
Heterogeneous Catalysis ◽  
Benzyl Alcohol ◽  
Batch Reactor ◽  
Value Added ◽  
Solvent Free ◽  
Biodiesel Production ◽  
Area Measurement ◽  
Solid Catalyst ◽  
Glycerol Ether ◽  
Insight Into

Value addition to glycerol, the sole co-product in biodiesel production, will lead to reform of the overall biodiesel economy. Different valuable chemicals can be produced from glycerol using heterogeneous catalysis and these valuable chemicals are useful in industries such as cosmetics, pharmaceuticals, fuels, soap, paints, and fine chemicals. Therefore, the conversion of glycerol to valuable chemicals using heterogeneous catalysis is a noteworthy area of research. Etherification of glycerol with alkenes or alcohols is an important reaction in converting glycerol to various value-added chemicals. This article describes reaction of glycerol with benzyl alcohol in solvent-free medium by using a clay supported modified heteropolyacid (HPA), Cs2.5H0.5PW12O40/K-10 (Cs-DTP/K-10) as solid catalyst and its comparison with other catalysts in a batch reactor. Mono-Benzyl glycerol ether (MBGE) was the major product formed in the reaction along with formation of di-benzyl glycerol ether (DBGE). The effects of different parameters were studied to optimize the reaction parameters. This work provides an insight into characterization of Cs2.5H0.5PW12O40/K-10 catalyst by advanced techniques such as surface area measurement, X-ray analysis, ICP-MS, FT-IR, and SEM. Reaction products were characterized and confirmed by using the GCMS method. The kinetic model was developed from an insight into the reaction mechanism. The apparent energy of activation was found to be 18.84 kcal/mol.

scholarly journals Biodiesel Production from Melia azedarach and Ricinus communis Oil by Transesterification Process

Catalysts ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 427 ◽  
Author(s):  
Muhammad Awais ◽  
Sa’ed A Musmar ◽  
Faryal Kabir ◽  
Iram Batool ◽  
Muhammad Asif Rasheed ◽  
...  
Keyword(s):  
Ricinus Communis ◽  
Cost Effective ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Melia Azedarach ◽  
Renewable Fuel ◽  
Animal Fats ◽  
Edible Crops ◽  
American Society

Biodiesel is a renewable fuel usually produced from vegetable oils and animal fats. This study investigates the extraction of oil and its conversion into biodiesel by base-catalyzed transesterification. Firstly, the effect of various solvents (methanol, n-hexane, chloroform, di-ethyl ether) on extraction of oil from non-edible crops, such as R. communis and M. azedarach, were examined. It was observed that a higher concentration of oil was obtained from R. communis (43.6%) as compared to M. azedarach (35.6%) by using methanol and n-hexane, respectively. The extracted oils were subjected to NaOH (1%) catalyzed transesterification by analyzing the effect of oil/methanol molar ratio (1:4, 1:6, 1:8 and 1:10) and varying temperature (20, 40, 60 and 80 °C) for 2.5 h of reaction time. M. azedarach yielded 88% and R. communis yielded 93% biodiesel in 1:6 and 1:8 molar concentrations at ambient temperature whereas, 60 °C was selected as an optimum temperature, giving 90% (M. azedarach) and 94% (R. communis) biodiesel. The extracted oil and biodiesel were characterized for various parameters and most of the properties fulfilled the American Society for Testing and Materials (ASTM) standard biodiesel. The further characterization of fatty acids was done by Gas Chromatography/Mass Spectrometer (GC/MS) and oleic acid was found to be dominant in M. azedarach (61.5%) and R. communis contained ricinoleic acid (75.53%). Furthermore, the functional groups were analyzed by Fourier Transform Infrared Spectroscopy. The results suggested that both of the oils are easily available and can be used for commercial biodiesel production at a cost-effective scale.

Sign in / Sign up

Export Citation Format

Share Document