scholarly journals Numerical Investigation of a Dynamic Stall on a Single Rotating Blade

Aerospace ◽  
2021 ◽  
Vol 8 (4) ◽  
pp. 90
Author(s):  
Yin Ruan ◽  
Manfred Hajek
Keyword(s):  
Numerical Investigation ◽  
Vortex Structure ◽  
Leading Edge ◽  
Rotor Blades ◽  
Tip Vortex ◽  
Dynamic Stall ◽  
Leading Edge Vortex ◽  
Pitching Airfoil ◽  
Edge Vortex ◽  
High Reynolds

Dynamic stall is a phenomenon on the retreating blade of a helicopter which can lead to excessive control loads. In order to understand dynamic stall and fill the gap between the investigations on pitching wings and full helicopter rotor blades, a numerical investigation of a single rotating and pitching blade is carried out. The flow phenomena thereupon including the Ω-shaped dynamic stall vortex, the interaction of the leading edge vortex with the tip vortex, and a newly noticed vortex structure originating inboard are examined; they show similarities to pitching wings, while also possessing their unique features of a rotating system. The leading edge/tip vortex interaction dominates the post-stall stage. A newly noticed swell structure is observed to have a great impact on the load in the post-stall stage. With such a high Reynolds number, the Coriolis force exerted on the leading edge vortex is negligible compared to the pressure force. The force history/vortex structure of the slice r/R = 0.898 is compared with a 2D pitching airfoil with the same harmonic pitch motion, and the current simulation shows the important role played by the swell structure in the recovery stage.

The aerodynamics of revolving wings I. Model hawkmoth wings

2002 ◽  
Vol 205 (11) ◽  
pp. 1547-1564 ◽  
Author(s):  
James R. Usherwood ◽  
Charles P. Ellington
Keyword(s):  
Insect Flight ◽  
Leading Edge ◽  
Dynamic Stall ◽  
Leading Edge Vortex ◽  
Force Coefficients ◽  
Attached Flow ◽  
Edge Vortex ◽  
Drag And Lift ◽  
Geometric Relationship ◽  
Spanwise Flow

SUMMARYRecent work on flapping hawkmoth models has demonstrated the importance of a spiral `leading-edge vortex' created by dynamic stall, and maintained by some aspect of spanwise flow, for creating the lift required during flight. This study uses propeller models to investigate further the forces acting on model hawkmoth wings in `propeller-like' rotation (`revolution'). Steadily revolving model hawkmoth wings produce high vertical (≈ lift) and horizontal (≈ profile drag) force coefficients because of the presence of a leading-edge vortex. Both horizontal and vertical forces, at relevant angles of attack, are dominated by the pressure difference between the upper and lower surfaces; separation at the leading edge prevents `leading-edge suction'. This allows a simple geometric relationship between vertical and horizontal forces and the geometric angle of attack to be derived for thin, flat wings. Force coefficients are remarkably unaffected by considerable variations in leading-edge detail, twist and camber. Traditional accounts of the adaptive functions of twist and camber are based on conventional attached-flow aerodynamics and are not supported. Attempts to derive conventional profile drag and lift coefficients from `steady' propeller coefficients are relatively successful for angles of incidence up to 50° and, hence, for the angles normally applicable to insect flight.

New Pair of Leading-Edge Vortex Structure for Flow over Delta Wing

2005 ◽  
Vol 42 (3) ◽  
pp. 718-721 ◽  
Author(s):  
Jinjun Wang ◽  
Jingxia Zhan
Keyword(s):  
Vortex Structure ◽  
Delta Wing ◽  
Leading Edge ◽  
Leading Edge Vortex ◽  
Edge Vortex

Dynamic stall control using inflatable leading edge

2020 ◽  
Vol 34 (14n16) ◽  
pp. 2040108 ◽  
Author(s):  
Shi-Long Xing ◽  
He-Yong Xu ◽  
Zheng-Yin Ye ◽  
Ming-Sheng Ma ◽  
Yue Xu
Keyword(s):  
Lift Coefficient ◽  
Leading Edge ◽  
Adverse Pressure Gradient ◽  
Rotor Blades ◽  
Dynamic Stall ◽  
Elastic Membrane ◽  
Radius Of Curvature ◽  
Structural Dynamic ◽  
Pitching Airfoil ◽  
Stall Control

The inflatable leading edge (ILE) as a dynamic stall control concept for helicopter rotor blades was investigated numerically on a dynamically pitching airfoil. A fluid–structure interaction (FSI) numerical method for the elastic membrane structure was constructed based on unsteady Reynolds-averaged Navier–Stokes (URANS) equations and mass spring damper (MSD) structural dynamic model. The numerical results indicate that the ILE can change the radius of curvature of the airfoil leading edge, which could reduce the streamwise adverse pressure gradient and suppress the formation of dynamic stall vortex (DSV). Although the maximum lift coefficient of the airfoil is reduced by 8.2%, the maximum drag and pitching moment coefficients of the airfoil are reduced by up to 50.1% and 55.3%, respectively.

A Study of the Leading Edge Vortex and Tip Vortex on Prop-Fan Blades

1987 ◽  
Vol 109 (3) ◽  
pp. 325-331 ◽  
Author(s):  
C. M. Vaczy ◽  
D. C. McCormick
Keyword(s):  
Flow Visualization ◽  
Systematic Study ◽  
Leading Edge ◽  
Lower Surface ◽  
Tip Vortex ◽  
Leading Edge Vortex ◽  
Edge Loading ◽  
Oil Flow ◽  
Oil Flow Visualization ◽  
Edge Vortex

An oil flow visualization study was conducted on the blades of a counterrotating prop-fan model, the CRP-X1. A kink in the oil streaks was interpreted as an indication of the leading edge vortex reattachment line. The leading edge vortex was found to be on the lower surface for cases with negative leading edge loading and on the upper surface for cases with positive leading edge loading. For most cases, the leading edge vortex merged with a tip vortex. The results presented here represent the first systematic study of this phenomenon.

scholarly journals The three–dimensional leading–edge vortex of a ‘hovering’ model hawkmoth

1997 ◽  
Vol 352 (1351) ◽  
pp. 329-340 ◽  
Author(s):  
Coen van den Berg ◽  
Charles P. Ellington
Keyword(s):  
Wing Length ◽  
Three Dimensional ◽  
Axial Flow ◽  
Leading Edge ◽  
Tip Vortex ◽  
Flow Visualisation ◽  
High Lift ◽  
Leading Edge Vortex ◽  
Edge Vortex ◽  
Wing Chord

Recent flow visualisation experiments with the hawkmoth, Manduca sexta , revealed small but clear leading–edge vortex and a pronounced three–dimensional flow. Details of this flow pattern were studied with a scaled–up, robotic insect (‘the flapper’) that accurately mimicked the wing movements of a hovering hawkmoth. Smoke released from the leading edge of the flapper wing confirmed the existence of a small, strong and stable leading–edge vortex, increasing in size from wingbase to wingtip. Between 25 and 75 % of the wing length, its diameter increased approximately from 10 to 50 % of the wing chord. The leading–edge vortex had a strong axial flow veolocity, which stabilized it and reduced its diamater. The vortex separated from the wing at approximately 75 % of the wing length and thus fed vorticity into a large, tangled tip vortex. If the circulation of the leading–edge vortex were fully used for lift generation, it could support up to two–thirds of the hawkmoth's weight during the downstroke. The growth of this circulation with time and spanwise position clearly identify dynamic stall as the unsteady aerodynamic mechanism responsible for high lift production by hovering hawkmoths and possibly also by many other insect species.

Dynamic Stall Control Using Deployable Leading-Edge Vortex Generators

AIAA Journal ◽  
2012 ◽  
Vol 50 (10) ◽  
pp. 2135-2145 ◽  
Author(s):  
A. Le Pape ◽  
M. Costes ◽  
F. Richez ◽  
G. Joubert ◽  
F. David ◽  
...  
Keyword(s):  
Leading Edge ◽  
Vortex Generators ◽  
Dynamic Stall ◽  
Leading Edge Vortex ◽  
Edge Vortex ◽  
Stall Control
Sign in / Sign up

Export Citation Format

Share Document