Numerical Study on Flow and Noise Characteristics of a NACA0018 Airfoil with a Porous Trailing Edge

2021 ◽  
Author(s):  
Wei Jun Zhu ◽  
Jia Ying Liu ◽  
Zhen Ye Sun ◽  
Jiu Fa Cao ◽  
Wen Zhong Shen
Keyword(s):  
Numerical Study ◽  
Trailing Edge ◽  
Noise Characteristics ◽  
Naca0018 Airfoil

Numerical study on the airfoil self-noise of three owl-based wings with the trailing-edge serrations

2021 ◽  
pp. 095441002098822
Author(s):  
Dian Li ◽  
Xiaomin Liu ◽  
Lei Wang ◽  
Fujia Hu ◽  
Guang Xi
Keyword(s):  
Flow Field ◽  
Noise Reduction ◽  
Numerical Study ◽  
Barn Owl ◽  
Aerodynamic Noise ◽  
Frequency Noise ◽  
Trailing Edge ◽  
Reduction Mechanisms ◽  
Trailing Edge Serrations ◽  
Bionic Airfoil

Previous publications have summarized that three special morphological structures of owl wing could reduce aerodynamic noise under low Reynolds number flows effectively. However, the coupling noise-reduction mechanism of bionic airfoil with trailing-edge serrations is poorly understood. Furthermore, while the bionic airfoil extracted from natural owl wing shows remarkable noise-reduction characteristics, the shape of the owl-based airfoils reconstructed by different researchers has some differences, which leads to diversity in the potential noise-reduction mechanisms. In this article, three kinds of owl-based airfoils with trailing-edge serrations are investigated to reveal the potential noise-reduction mechanisms, and a clean airfoil based on barn owl is utilized as a reference to make a comparison. The instantaneous flow field and sound field around the three-dimensional serrated airfoils are simulated by using incompressible large eddy simulation coupled with the FW-H equation. The results of unsteady flow field show that the flow field of Owl B exhibits stronger and wider-scale turbulent velocity fluctuation than that of other airfoils, which may be the potential reason for the greater noise generation of Owl B. The scale and magnitude of alternating mean convective velocity distribution dominates the noise-reduction effect of trailing-edge serrations. The noise-reduction characteristic of Owl C outperforms that of Barn owl, which suggests that the trailing-edge serrations can suppress vortex shedding noise of flow field effectively. The trailing-edge serrations mainly suppress the low-frequency noise of the airfoil. The trailing-edge serration can suppress turbulent noise by weakening pressure fluctuation.

scholarly journals Numerical Study of Darrieus Wind Turbine Blade Characteristic with Shape Changes of Trailing Edge

2020 ◽  
pp. 1088-1096
Author(s):  
Viktus Kolo Koten ◽  
Syukri Himran ◽  
Nasaruddin Salam ◽  
Luther Sule
Keyword(s):  
Wind Turbine ◽  
Turbine Blade ◽  
Numerical Study ◽  
Wind Turbine Blade ◽  
Trailing Edge ◽  
Shape Changes

LES and Hybrid RANS/LES of a Fundamental Trailing Edge Slot

2014 ◽  
Author(s):  
Elizaveta Ivanova ◽  
Gregory M. Laskowski
Keyword(s):  
Heat Transfer ◽  
Experimental Data ◽  
Numerical Study ◽  
Mixing Layer ◽  
Detached Eddy Simulation ◽  
Trailing Edge ◽  
Adiabatic Wall ◽  
Mean Velocity ◽  
Eddy Simulation ◽  
Delayed Detached Eddy Simulation

This paper presents the results of a numerical study on the predictive capabilities of Large Eddy Simulation (LES) and hybrid RANS/LES methods for heat transfer, mean velocity, and turbulence in a fundamental trailing edge slot. The geometry represents a landless slot (two-dimensional wall jet) with adjustable slot lip thickness. The reference experimental data taken from the publications of Kacker and Whitelaw [1] [2] [3] [4] contains the adiabatic wall effectiveness together with the velocity and the Reynolds-stress profiles for various blowing ratios and slot lip thicknesses. The simulations were conducted at three different lip thickness and several blowing ratio values. The comparison with the experimental data shows a general advantage of LES and hybrid RANS/LES methods against unsteady RANS. The predictive capability of the tested LES models (dynamic ksgs-equation [5] and WALE [6]) was comparable. The Improved Delayed Detached Eddy Simulation (IDDES) hybrid method [7] also shows satisfactory agreement with the experimental data. In addition to the described baseline investigations, the influence of the inlet turbulence boundary conditions and their implication for the initial mixing layer and heat transfer development were studied for both LES and IDDES.

Study on the Influence of Inlet Asymmetry on Aerodynamic Noise of Cooling Fan

2020 ◽  
Author(s):  
Jie Tian ◽  
Zonghan Sun ◽  
Pengfei Chai ◽  
Hua Ouyang
Keyword(s):  
Heat Dissipation ◽  
Electronic Device ◽  
Numerical Study ◽  
Rotor Blades ◽  
Aerodynamic Noise ◽  
Sampling Point ◽  
Inlet Flow ◽  
Cooling Fan ◽  
Noise Characteristics ◽  
Correction Technique

Abstract Experimental and numerical studies on the aerodynamic noise characteristics of a variable-speed axial fan commonly used for electronic device heat dissipation were conducted. First, the far-field noise spectrum of the fan was measured using a microphone array on the contour plane of the fan axis. The spectral analysis indicated that the discrete single-tone noise energy ratio was high, which indicates that it was the dominant aerodynamic noise. Afterwards, the double-uniform sampling point mode correction technique, which is based on the circumferential acoustic mode measurement method, was used to obtain the modal distribution on the inlet and outlet sides of the cooling fan. The influence of inlet unevenness on the cooling fan was identified. The traditional Tyler-Sofrin rotor-stator interaction formula was modified to account for the non-axisymmetric shape of the fan inlet bellmouth. The validity of the modified formula was verified by measuring the circumferential acoustic modes of three cooling fans with different rotor and strut counts. Furthermore, a CFD numerical study was conducted using Fluent to understand the influence of uneven inlet flow. The results showed that uneven inlet flow significantly affects the size and distribution of unsteady pulses on the rotor blades, which cause regular, periodic changes as the rotor blades rotate. Interactions between rotor blades and inlet unevenness were observed via the POD method as well. The discussion of the circumferential modes from aerodynamic noise of an axial flow cooling fan can act as a reference for further cooling fan noise reduction measures.

scholarly journals Numerical Study of Sediment Erosion Analysis in Francis Turbine

2019 ◽  
Vol 11 (5) ◽  
pp. 1423 ◽  
Author(s):  
Md Rakibuzzaman ◽  
Hyoung-Ho Kim ◽  
Kyungwuk Kim ◽  
Sang-Ho Suh ◽  
Kyung Kim
Keyword(s):  
Erosion Rate ◽  
Cavitation Erosion ◽  
Numerical Study ◽  
Leading Edge ◽  
Suction Side ◽  
Hydraulic Turbine ◽  
Francis Turbine ◽  
Trailing Edge ◽  
Sand Erosion ◽  
Turbine Design

Effective hydraulic turbine design prevents sediment and cavitation erosion from impacting the performance and reliability of the machine. Using computational fluid dynamics (CFD) techniques, this study investigated the performance characteristics of sediment and cavitation erosion on a hydraulic Francis turbine by ANSYS-CFX software. For the erosion rate calculation, the particle trajectory Tabakoff–Grant erosion model was used. To predict the cavitation characteristics, the study’s source term for interphase mass transfer was the Rayleigh–Plesset cavitation model. The experimental data acquired by this study were used to validate the existing evaluations of the Francis turbine. Hydraulic results revealed that the maximum difference was only 0.958% compared with the CFD data, and 0.547% compared with the experiment (Korea Institute of Machinery and Materials (KIMM)). The turbine blade region was affected by the erosion rate at the trailing edge because of their high velocity. Furthermore, in the cavitation–erosion simulation, it was observed that abrasion propagation began from the pressure side of the leading edge and continued along to the trailing edge of the runner. Additionally, as sediment flow rates grew within the area of the attached cavitation, they increased from the trailing edge at the suction side, and efficiency was reduced. Cavitation–sand erosion results then revealed a higher erosion rate than of those of the sand erosion condition.

Numerical Study of Heat Transfer in Novel Wavy Trailing Edge Design for Gas Turbine Airfoils

2019 ◽  
Author(s):  
Sarwesh Parbat ◽  
Li Yang ◽  
Minking Chyu ◽  
Sin Chien Siw ◽  
Ching-Pang Lee
Keyword(s):  
Heat Transfer ◽  
Steady State ◽  
Gas Turbine ◽  
Numerical Study ◽  
Turbine Blades ◽  
Suction Side ◽  
Inlet Temperature ◽  
Protective Film ◽  
Pressure Side ◽  
Trailing Edge

Abstract The strive to achieve increasingly higher efficiencies in gas turbine power generation has led to a continued rise in the turbine inlet temperature. As a result, novel cooling approaches for gas turbine blades are necessary to maintain them within the material’s thermal mechanical performance envelope. Various internal and external cooling technologies are used in different parts of the blade airfoil to provide the desired levels of cooling. Among the different regions of the blade profile, the trailing edge (TE) presents additional cooling challenges due to the thin cross section and high thermal loads. In this study, a new wavy geometry for the TE has been proposed and analyzed using steady state numerical simulations. The wavy TE structure resembled a sinusoidal wave running along the span of the blade. The troughs on both pressure side and suction side contained the coolant exit slots. As a result, consecutive coolant exit slots provided an alternating discharge between the suction side and the pressure side of the blade. Steady state conjugate heat transfer simulations were carried out using CFX solver for four coolant to mainstream mass flow ratios of 0.45%, 1%, 1.5% and 3%. The temperature distribution and film cooling effectiveness in the TE region were compared to two conventional geometries, pressure side cutback and centerline ejection which are widely used in vanes and blades for both land-based and aviation gas turbine engines. Unstructured mesh was generated for both fluid and solid domains and interfaces were defined between the two domains. For turbulence closer, SST-kω model was used. The wall y+ was maintained < 1 by using inflation layers at all the solid fluid interfaces. The numerical results depicted that the alternating discharge from the wavy TE was able to form protective film coverage on both the pressure and suction side of the blade. As a result, significant reduction in the TE metal was observed which was up to 14% lower in volume averaged temperature in the TE region when compared to the two baseline conventional configurations.

Sign in / Sign up

Export Citation Format

Share Document