Dynamic Stall Characteristics of the Bionic Airfoil with Different Waviness Ratios

A dynamic stall will cause dramatic changes in the aerodynamic performance of the blade, resulting in a sharp increase in the blade vibration load. The bionic leading-edge airfoil with different waviness ratios, inspired by the humpback whales flipper, is adopted to solve this problem. In this study, based on the NACA0015 airfoil, the three-dimensional unsteady numerical simulation and sliding mesh technique are used to reveal the flow control mechanism on the dynamic stall of the bionic wavy leading edge. The effects of the waviness ratio on the dynamic stall characteristics of the airfoil are also investigated. The results show that the peak drag coefficient is dramatically reduced when a sinusoidal leading edge is applied to the airfoil. Although the peak lift coefficient is also reduced, the reduction is much smaller. When the waviness ratio R is 0.8, the peak drag coefficient of the airfoil is reduced by 17.14% and the peak lift coefficient of the airfoil is reduced by 9.20%. The dynamic hysteresis effect is improved gradually with an increasing waviness ratio. For the bionic airfoil with R = 1.0, the area of the hysteresis loop is the smallest.

Numerical Simulation of Flow over Bionic Airfoil

In this study, the aerodynamic performance of bionic airfoil was numerically studied by CFD method. The bionic airfoil was represented by the combination of airfoil and a small trailing edge flap. A variety of configurations were calculated to study the effect of flap parameters, such as the flap angle, position, and shape, on the bionic airfoil aerodynamic characteristics based on two layouts which were that (1) there was a tiny gap between the airfoil and the flap and (2) there was no gap between the two. The results showed that the flap angle and position had significant effects on the aerodynamic performance of the airfoil with the two layouts. Compared with the clean airfoil, the maximum lift coefficients of the first layout and the second layout could be increased by 10.9% and 7.9%, respectively. And the effective angle of attack (AoA) range for improving the lift-to-drag ratio could reach 7°. The flap shape also affected the airfoil aerodynamic characteristics, and the flap with the sinusoid curve shape showed ideal performance.

Numerical study on the airfoil self-noise of three owl-based wings with the trailing-edge serrations

Previous publications have summarized that three special morphological structures of owl wing could reduce aerodynamic noise under low Reynolds number flows effectively. However, the coupling noise-reduction mechanism of bionic airfoil with trailing-edge serrations is poorly understood. Furthermore, while the bionic airfoil extracted from natural owl wing shows remarkable noise-reduction characteristics, the shape of the owl-based airfoils reconstructed by different researchers has some differences, which leads to diversity in the potential noise-reduction mechanisms. In this article, three kinds of owl-based airfoils with trailing-edge serrations are investigated to reveal the potential noise-reduction mechanisms, and a clean airfoil based on barn owl is utilized as a reference to make a comparison. The instantaneous flow field and sound field around the three-dimensional serrated airfoils are simulated by using incompressible large eddy simulation coupled with the FW-H equation. The results of unsteady flow field show that the flow field of Owl B exhibits stronger and wider-scale turbulent velocity fluctuation than that of other airfoils, which may be the potential reason for the greater noise generation of Owl B. The scale and magnitude of alternating mean convective velocity distribution dominates the noise-reduction effect of trailing-edge serrations. The noise-reduction characteristic of Owl C outperforms that of Barn owl, which suggests that the trailing-edge serrations can suppress vortex shedding noise of flow field effectively. The trailing-edge serrations mainly suppress the low-frequency noise of the airfoil. The trailing-edge serration can suppress turbulent noise by weakening pressure fluctuation.

Numerical investigation of aerodynamic and acoustic characteristics of bionic airfoils inspired by bird wing

Airfoil is the basic element of fluid machinery and aircraft, and the noise generated from that is an important research aspect. Aiming to reduce the aerodynamic noise around the airfoil, this study proposes an airfoil inspired by the long-eared owl wing and another airfoil coupled with the bionic airfoil profile, leading edge waves, and trailing edge serrations. Numerical simulations dependent on the large eddy simulation method coupled with the wall-adapting local eddy-viscosity model and the Ffowcs Williams and Hawkings equation are conducted to compare the aerodynamic and acoustic characteristics of two types of bionic airfoils at low Reynolds number condition. The simulations reveal the dipole characteristic of acoustic source and sound pressure level distribution at various frequencies. Two types of bionic airfoils show lower noise compared with the conventional NACA 0012 airfoil with a similar relative thickness of 12%. Compared with the bionic airfoil, the average value of sound pressure level at the monitoring points around the bionic coupling airfoil is decreased by 9.94 dB, meanwhile the lift-to-drag ratio also keep higher. The bionic coupling airfoil exerts a suppression of sound pressure fluctuation on the airfoil surfaces, which result from that the range and size of separation vortices are reduced and the distance between vortices and airfoil surface are increased. The tube-shaped vortices in the wake of airfoil are effectively restrained and split into small scale vortices, which are important to cause less aerodynamic noise around the bionic coupling airfoil. Consequently, a novel bionic coupling airfoil is developed with the excellent aerodynamic and acoustic performance.