An Efficient Treatment Technique for Remediation of Phase Trapping Damage in Tight Carbonate Gas Reservoirs

2020 ◽  
Author(s):  
Rasoul Nazari Moghaddam ◽  
Marcel Van Doorn ◽  
Auribel Dos Santos
Author(s):  
Dana A. Da’ana ◽  
Nabil Zouari ◽  
Mohammad Y. Ashfaq ◽  
Mohammed Abu-Dieyeh ◽  
Majeda Khraisheh ◽  
...  

Abstract Purpose of Review This paper reviews various low-cost treatment techniques such as adsorption, permeable reactive barrier, and biological techniques for the simultaneous removal of chemical and microbial contaminants from groundwater and discusses treatment mechanisms of different treatment techniques. This paper also discusses the challenges of groundwater treatment, how to choose the appropriate treatment technique, and cost analysis of groundwater treatment. Recent Findings Various treatment technologies have been used for the treatment of groundwater: physical, chemical, and biological technologies with different success rates. In the literature, various adsorbents have been successfully synthesized from low-cost and environmentally friendly materials. Adsorption is considered an efficient treatment technique for the removal of both toxic elements and pathogens by utilizing different adsorbents. For example, the nanostructures of MgO with a BET surface area of up to 171 m2/g obtained a very high adsorption capacity of 29,131 mg/g for fluoride ions in water, while the incorporation of iron in activated carbon has improved its adsorption capacity to 51.3 mg/g for arsenic. Moreover, certain adsorbents have shown the capability to remove 99% of the rotavirus and adenovirus from groundwater. Summary Groundwater resources are contaminated with toxic metals and pathogens. Therefore, water treatment technologies should be evaluated for their efficiency to remove such contaminants. Determination of the most cost-effective and efficient treatment technique is not an easy task and requires the understanding of various aspects such as the contaminants present in water, the reuse options considered, and cost analysis of the treatment technique.


2021 ◽  
Vol 73 (07) ◽  
pp. 57-57
Author(s):  
Leonard Kalfayan

As unconventional oil and gas fields mature, operators and service providers are looking toward, and collaborating on, creative and alternative methods for enhancing production from existing wells, especially in the absence of, or at least the reduction of, new well activity. While oil and gas price environments remain uncertain, recent price-improvement trends are supporting greater field testing and implementation of innovative applications, albeit with caution and with cost savings in mind. Not only is cost-effectiveness a requirement, but cost-reducing applications and solutions can be, too. Of particular interest are applications addressing challenging well-production needs such as reducing or eliminating liquid loading in gas wells; restimulating existing, underperforming wells, including as an alternative to new well drilling and completion; and remediating water blocking and condensate buildup, both of which can impair production from gas wells severely. The three papers featured this month represent a variety of applications relevant to these particular well-production needs. The first paper presents a technology and method for liquid removal to improve gas production and reserves recovery in unconventional, liquid-rich reservoirs using subsurface wet-gas compression. Liquid loading, a recurring issue downhole, can severely reduce gas production and be costly to remediate repeatedly, which can be required. This paper discusses the full technology application process and the supportive results of the first field trial conducted in an unconventional shale gas well. The second paper discusses the application of the fishbone stimulation system and technique in a tight carbonate oil-bearing formation. Fishbone stimulation has been around for several years now, but its best applications and potential have not necessarily been fully understood in the well-stimulation community. This paper summarizes a successful pilot application resulting in a multifold increase in oil-production rate and walks the reader through the details of the pilot candidate selection, completion design, operational challenges, and lessons learned. The third paper introduces and proposes a chemical treatment to alleviate phase trapping in tight carbonate gas reservoirs. Phase trapping can be in the form of water blocking or increasing condensate buildup from near the wellbore and extending deeper into the formation over time. Both can reduce relative permeability to gas severely. Water blocks can be a one-time occurrence from drilling, completion, workover, or stimulation operations and can often be treated effectively with solvent plus proper additive solutions. Similar treatments for condensate banking in gas wells, however, can provide only temporary alleviation, if they are even effective. This paper proposes a technique for longer-term remediation of phase trapping in tight carbonate gas reservoirs using a unique, slowly reactive fluid system. Recommended additional reading at OnePetro: www.onepetro.org. SPE 200345 - Insights Into Field Application of Enhanced-Oil-Recovery Techniques From Modeling of Tight Reservoirs With Complex High-Density Fracture Network by Geng Niu, CGG, et al. SPE 201413 - Diagnostic Fracture Injection Test Analysis and Simulation: A Utica Shale Field Study by Jeffery Hildebrand, The University of Texas at Austin, et al.


Author(s):  
Jiang Li ◽  
Xianchao Chen ◽  
Ping Gao ◽  
Jingchao Zhou

AbstractIt is very important to accurately predict the gas well productivity and reasonably allocate the gas production at the early development stage of gas reservoirs. However, both the non-Darcy and stress sensitivity effects have not been investigated in dual-porosity model of tight carbonate gas reservoirs. This paper proposed a new dual-porosity binomial deliverability model and single-well production proration numerical model, which consider the effects of non-Darcy and stress sensitivity. The field gas well deliverability tests data validated the accuracy of the new analytical model, which is a very helpful deliverability method when lacking deliverability test. A geological model was built on the results of the well log, well testing, and well production analysis. Then, a reasonable production proration analysis was conducted based on history matched single-well numerical model. The gas productivity index curve and production–prediction of MX22 several simulation cases were adopted to analyze the reasonable production proration. The results indicate that 1/6 may be suitable for high productivity gas well proration. In addition, the absolute open flow rate from the numerical simulation is higher than that from the new deliverability equation, which also shows that the pressure transient analysis sometimes has some deviation in formation property prediction. It is suggested comprehensively utilizing the analytical binomial model and the single-well numerical model in tight carbonate gas well deliverability evaluation.


2001 ◽  
Vol 14 (3) ◽  
pp. 202-206 ◽  
Author(s):  
K. Hirano ◽  
J. Okamura ◽  
T. Taira ◽  
K. Sano ◽  
A. Toyoda ◽  
...  

2020 ◽  
Vol 82 (7) ◽  
pp. 1327-1338
Author(s):  
Emanuely José de Souza ◽  
Naiana Santos da Cruz Santana Neves ◽  
Rayssa Kelen de Mendonça Gomes ◽  
Sérgio Gonzaga dos Santos Júnior ◽  
Lívia Vieira Carlini Charamba ◽  
...  

Abstract Advanced oxidative processes (AOP) have been consolidated as an efficient treatment technique to degrade persistent contaminants. In addition to them, biosorption also emerges as a technique capable of removing both pollutants and intermediate products generated by other treatments such as AOP. Thus, this work evaluated the degradation and removal of the mixture of dyes Direct Red 23 and Direct Red 227 in aqueous solution (50 mg·L−1 of each). Preliminary tests showed that the photo-Fenton system under sunlight radiation was the most efficient, reaching a degradation ≥93%. For the adsorptive process using chicken eggshell, preliminary tests indicated that the ideal dosage of adsorbent was 8.0 g·L−1. For this process, a factorial design indicated the best working conditions, which demonstrated from the system adjusted well to the Elovich (kinetic) model and to the Freundlich and Sips models (equilibrium). When associating the two processes, AOP followed by adsorption achieved a total degradation/removal of ≈98% (for all λ) in a time of 60 min. Thus, the feasibility of the combined treatment is indicated.


2015 ◽  
Author(s):  
Mauricio Sanchez ◽  
Justin Tate Abel ◽  
Muhammad Idris ◽  
Eduardo Soriano ◽  
Alfredo Lopez ◽  
...  

Abstract Conventional hydraulic fracture stimulation techniques have been widely used to enhance production from tight gas reservoirs. Since the initial use of this method to increase production rates, the industry has witnessed continued advancement in terms of fracturing theory, fluids, and techniques. The use of carbon dioxide (CO2) since the early 1960s has continued to be a significant part of these advances. CO2 has been used for many years as an energy source to aid fluid recovery of well stimulation fluids. This technology predominantly has been used to stimulate tight sandstone reservoirs. There are very limited applications for low permeable tight carbonate reservoirs because of complexities associated with the physical and mechanical properties of carbonate rocks and its interaction with fracturing fluid. Nevertheless, the advantages of using assisted CO2 stimulation fluids as the elimination of potential formation damage normally associated with fracturing fluids and very rapid cleanup are still present. This paper outlines one of the first acid fracturing jobs assisted with CO2 conducted on a tight gas well reservoir in Saudi Arabia. It describes in a simple manner the screening methodology and key parameters considered during selection of a well candidate and the design process, which was based on petrophysical, mechanical, and chemistry properties of the formation and the respective interaction with treatment fluids. Moreover, primary operational procedures and guidelines are discussed, highlighting a safety risk assessment point of view. Implementing this technique in a more generalized manner in the field can help save considerable operational time and costs. CO2 used to energized fracturing fluids can increase the productivity of the well while using less water and less acid than conventional acid fracturing, which is of primary importance in such a harsh environment, requiring less water consumption.


2012 ◽  
Vol 66 (12) ◽  
pp. 2533-2538 ◽  
Author(s):  
Dhorgham Skban Ibrahim ◽  
N. Sakthipriya ◽  
N. Balasubramanian

Experiments were carried out in a batch reactor to treat the oily effluent by electro-coagulation. The influence of operating parameters such as applied current, type of electrode and electrolysis time on electro-coagulation efficiency has been critically examined. The maximum percentage removal of chemical oxygen demand (COD) was 94% under optimum experimental conditions of pH 6.7, current density 6 mA/cm2, electrolysis time 40 min, and using mild steel as anode. The remaining sludge in the reactor was analyzed by energy disperse analysis of X-rays (EDAX) and scanning electron microscope (SEM) analysis. The analysis confirms that the oily pollutant was removed by electroflotation and adsorption of the oily particles of precipitate during the electro-coagulation process. Electro-coagulation can be used as an efficient treatment technique for oily wastewater.


Author(s):  
Mohammed Yousif

  Autism is a disease, which affects the child's ability to communicate with those around them and develop mutual relations with them and hence it needs to have a quick and efficient treatment technique. The earliest age of ASD diagnosis is between 4.5 and 5.5 years. Approximately 6 per 1000 children under eight years suffer from ASD. Statistics show an annual increase of the disease about 3,500 cases of children with autism in the Sultanate of Oman. The aim of this work is to design an Interactive Learning System based Windows Application for teaching the children with Autism. The Windows Application is developed using C# which will be useful to teach the children different things such as Alphabets, Numbers, Fruits, Vegetables and many more. The application is a bi-lingual application (English and Arabic). The application can be used also to test the progress of the children. Also, develop interactive materials that help children with special needs for enhancing their communicating and thinking. In addition develop interactive materials that help children with special needs for enhancing their communication and rational skills which could help them to integrate into the society.


VASA ◽  
2016 ◽  
Vol 45 (1) ◽  
pp. 49-56 ◽  
Author(s):  
Frantisek Stanek ◽  
Radoslava Ouhrabkova ◽  
David Prochazka

Abstract. Background: The aim of this prospective single-centre study was to analyse the immediate results, failures and complications of percutaneous mechanical thrombectomy using the Rotarex catheter in the treatment of acute and subacute occlusions of peripheral arteries and bypasses, as well as to evaluate long-term outcomes of this method. Patients and methods: Patients with acute (duration of symptoms < 14 days) or subacute (duration of symptoms > 14 days and < 3 months) occlusions of peripheral arteries and bypasses were selected consecutively for treatment. The cohort consisted of 113 patients, aged 18 - 92 years (median 72 years). In all, 128 procedures were performed. Results: Angiographic success was obtained in 120 interventions (93.8 %). Reasons for failures were rethrombosis of a partially recanalised segment in six procedures, and embolism into crural arteries in one intervention - percutaneous aspiration thromboembolectomy (PAT) and/or thrombolysis were ineffective in all these cases. Breakage of the Rotarex catheter happened in one procedure. Embolisation into crural arteries as a transitory complication solvable with PAT and/or thrombolysis occurred in four cases. Rethrombosis was more frequent in bypasses than in native arteries (p = 0.0069), in patients with longer occlusions (p = 0.026) and those with poorer distal runoff (p = 0.048). Embolisation happened more often in patients with a shorter duration of symptoms (p = 0.0001). Clinical success was achieved in 82.5 %. Major amputation was performed in 10 % of cases. Cumulative patency rates were 75 % after one month, 71 % after six months, 38 % after 12 months, 33 % after 18 months and 30 % after 24, 30, 36 and 42 months. Conclusions: Rotarex thrombectomy has excellent immediate results with a low rate of failures and complications. In comparison to thrombolysis, it enables the fast and efficient treatment of acute and subacute occlusions of peripheral arteries in one session.


Sign in / Sign up

Export Citation Format

Share Document