Rapid Thermal Processing of Hydrogen Silsesquioxane for Low Dielectric Constant Performance

1999 ◽  
Vol 565 ◽  
Author(s):  
J. N. Bremmer ◽  
D. Gray ◽  
Y. Liu ◽  
K. Gruszynski ◽  
S. Marcus
Keyword(s):  
Dielectric Constant ◽  
Thermal Processing ◽  
Low Dielectric Constant ◽  
Process Conditions ◽  
Low Density ◽  
Hydrogen Silsesquioxane ◽  
Thermal Cure ◽  
Cure Process ◽  
Low Dielectric ◽  
Low K

AbstractLow dielectric constant hydrogen silsesquioxane films were achieved by rapid thermal cure processing with production viable equipment. A reduced dielectric constant of k = 2.5–2.6 is demonstrated by optimizing rapid thermal cure process conditions to produce low density hydrogen silsesquioxane thin films. This is a significant reduction relative to production proven furnace cure processed hydrogen silsesquioxane with k = 2.9. Concurrent with reduced k performance is a characteristic film expansion which contributes to formation of a low density structure. A mechanism for film expansion and relevance to low k performance is described; and issues relative to integration of rapid thermal processed low k hydrogen silsesquioxane are discussed.

Integration Issues for Low Dielectric Constant Materials in each Generation of ULSI'S

1999 ◽  
Vol 565 ◽  
Author(s):  
Hideki Gomi ◽  
Koji Kishimoto ◽  
Tatsuya Usami ◽  
Ken-ichi Koyanagi ◽  
Takashi Yokoyama ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
Silicon Oxide ◽  
Process Integration ◽  
Low Dielectric Constant ◽  
Next Generation ◽  
Hydrogen Silsesquioxane ◽  
Low Dielectric ◽  
Low Dielectric Constant Materials ◽  
Fluorinated Silicon Oxide ◽  
Low K

AbstractThe technologies utilizing Fluorinated Silicon Oxide (FSG, k=3.6) and Hydrogen Silsesquioxane (HSQ, k=3.0) have been established for 0.25-μm and 0.18-μm generation ULSIs. However, low-k materials for the next generation ULSIs, which have a dielectric constant of less than 3.0, have not become mature yet. In this paper, we review process integration issues in applying FSG and HSQ, and describe integration results and device performance using Fluorinated Amorphous Carbon (a-C:F, k=2.5) as one of the promising low-k materials for the next generation ULSIs.

Integration Issues for Low Dielectric Constant Materials in each Generation of ULSI's

1999 ◽  
Vol 564 ◽  
Author(s):  
Hideki Gomi ◽  
Koji Kishimoto ◽  
Tatsuya Usami ◽  
Ken-ichi Koyanagi ◽  
Takashi Yokoyama ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
Silicon Oxide ◽  
Process Integration ◽  
Low Dielectric Constant ◽  
Next Generation ◽  
Hydrogen Silsesquioxane ◽  
Low Dielectric ◽  
Low Dielectric Constant Materials ◽  
Fluorinated Silicon Oxide ◽  
Low K

AbstractThe technologies utilizing Fluorinated Silicon Oxide (FSG, k=3.6) and Hydrogen Silsesquioxane (HSQ, k=3.0) have been established for 0.25-µm and 0.1 8-µm generation ULSIs. However, low-k materials for the next generation ULSIs, which have a dielectric constant of less than 3.0, have not become mature yet. In this paper, we review process integration issues in applying FSG and HSQ, and describe integration results and device performance using Fluorinated Amorphous Carbon (a-C:F, k=2.5) as one of the promising low-k materials for the next generation ULSIs.

Structire, Properties, and Process Characteristics of Low-K Materials Prepared by PECVD

1999 ◽  
Vol 565 ◽  
Author(s):  
Y. Shimogaki ◽  
S. W. Lim ◽  
E. G. Loh ◽  
Y. Nakano ◽  
K. Tada ◽  
...  
Keyword(s):  
Growth Rate ◽  
Dielectric Constant ◽  
Gas Flow ◽  
Structural Changes ◽  
Silicon Oxide ◽  
Reactive Species ◽  
Low Dielectric Constant ◽  
Low Dielectric ◽  
Step Coverage ◽  
Low K

AbstractLow dielectric constant F-doped silicon oxide films (SiO:F) can be prepared by adding fluorine source, like as CF4 to the conventional PECVD processes. We could obtain SiO:F films with dielectric constant as low as 2.6 from the reaction mixture of SiH4/N2 O/CF4. The structural changes of the oxides were sensitively detected by Raman spectroscopy. The three-fold ring and network structure of the silicon oxides were selectively decreased by adding fluorine into the film. These structural changes contribute to the decrease ionic polarization of the film, but it was not the major factor for the low dielectric constant. The addition of fluorine was very effective to eliminate the Si-OH in the film and the disappearance of the Si-OH was the key factor to obtain low dielectric constant. A kinetic analysis of the process was also performed to investigate the reaction mechanism. We focused on the effect of gas flow rate, i.e. the residence time of the precursors in the reactor, on growth rate and step coverage of SiO:F films. It revealed that there exists two species to form SiO:F films. One is the reactive species which contributes to increase the growth rate and the other one is the less reactive species which contributes to have uniform step coverage. The same approach was made on the PECVD process to produce low-k C:F films from C2F4, and we found ionic species is the main precursor to form C:F films.

The characterization and preparation of porous low dielectric films using various cyclodextrins as template materials

2003 ◽  
Vol 766 ◽  
Author(s):  
Jin-Heong Yim ◽  
Jung-Bae Kim ◽  
Hyun-Dam Jeong ◽  
Yi-Yeoul Lyu ◽  
Sang Kook Mah ◽  
...  
Keyword(s):  
Thin Film ◽  
Mechanical Properties ◽  
Dielectric Constant ◽  
Pore Structure ◽  
Pore Diameter ◽  
Dielectric Films ◽  
Low Dielectric Constant ◽  
Cyclodextrin Derivatives ◽  
Low Dielectric ◽  
Low K

AbstractPorous low dielectric films containing nano pores (∼20Å) with low dielectric constant (<2.2), have been prepared by using various kinds of cyclodextrin derivatives as porogenic materials. The pore structure such as pore size and interconnectivity can be controlled by changing functional groups of the cyclodextrin derivatives. We found that mechanical properties of porous low-k thin film prepared with mCSSQ (modified cyclic silsesquioxane) precursor and cyclodextrin derivatives were correlated with the pore interconnection length. The longer the interconnection length of nanopores in the thin film, the worse the mechanical properties of the thin film (such as hardness and modulus) even though the pore diameter of the films were microporous (∼2nm).

Robust spin-on-glass poly(methyl)silsesquioxane-based low-k materials derived from a cyclic siloxane precursor

RSC Advances ◽  
2015 ◽  
Vol 5 (82) ◽  
pp. 66511-66517 ◽  
Author(s):  
Albert S. Lee ◽  
Sung Yeoun Oh ◽  
Seung-Sock Choi ◽  
He Seung Lee ◽  
Seung Sang Hwang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Dielectric Constant ◽  
Low Dielectric Constant ◽  
Cyclic Siloxane ◽  
Low Dielectric ◽  
Methyl Silsesquioxane ◽  
Low K

Low dielectric constant poly(methyl)silsesquioxane spin-on-glass resins incorporating a cyclic precursor exhibited exceptional mechanical properties to withstand CMP processes.

Chemical-Mechanical Planarization of Low-k Polymers for Advanced IC Structures

2002 ◽  
Vol 124 (4) ◽  
pp. 362-366 ◽  
Author(s):  
Christopher L. Borst ◽  
Dipto G. Thakurta ◽  
William N. Gill ◽  
Ronald J. Gutmann
Keyword(s):  
Dielectric Constant ◽  
Surface Chemistry ◽  
Chemical Mechanical Planarization ◽  
Low Dielectric Constant ◽  
Chemical Company ◽  
Low Dielectric ◽  
Scale Models ◽  
Physically Based ◽  
Thickness Measurements ◽  
Low K

Successful integration of copper and low dielectric constant (low-k) materials is dependent on robust chemical-mechanical planarization (CMP) during damascene patterning. This process includes the direct removal of copper and interaction of the copper slurry with the underlying dielectric. Experiments were designed and performed to examine the CMP of two low-k polymers from Dow Chemical Company, bis-benzocyclobutene (BCB*, k=2.65) and “silicon-application low-k material” (SiLK* resin, k=2.65) with both acidic slurries suitable for copper damascene patterning and a KH phthalate-based model slurry developed for SiLK. Blanket polymer films were polished in order to determine the interactions that occur when copper and liner materials are removed by the damascene CMP process. Removal rates were obtained from material thickness measurements, post-CMP surface topography from AFM scans, and post-CMP surface chemistry from XPS measurements. Physically based wafer-scale models are presented which are compatible with the experimental results.

High-Density Plasma Etching of Low Dielectric Constant Materials

1998 ◽  
Vol 511 ◽  
Author(s):  
T. E. F. M. Standaert ◽  
P. J. Matsuo ◽  
S. D. Allen ◽  
G. S. Oehrlein ◽  
T. J. Dalton ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
High Density ◽  
Low Dielectric Constant ◽  
Hydrogen Silsesquioxane ◽  
Copper Surfaces ◽  
Low Dielectric ◽  
Oxygen Contamination ◽  
Low Dielectric Constant Materials ◽  
Fluorocarbon Film ◽  
Density Plasma

ABSTRACTThe patterning of several novel low dielectric constant (K) materials has been studied in a high-density plasma (HDP) tool. Recent results obtained on oxide-like materials, such as fluorinated oxide, hydrogen silsesquioxane (HSQ), and methyl silsesquioxane (MSQ), are reviewed. These materials can be successfully patterned using a fluorocarbon etching chemistry. The etching is in this case controlled by a thin fluorocarbon film at the surface. The patterning of polymer dielectrics can be performed in an oxygen etching chemistry. As an example, the patterning of Parylene-N in an oxygen chemistry is discussed. In this case, the ion and the oxygen radical flux need to be properly controlled to obtain a directional etching process. After the dielectric etch, either in a fluorocarbon or oxygen based chemistry, fluorocarbons and oxygen contamination remain at the exposed metal surfaces. We recently demonstrated how a plasma treatment following the dielectric etch reduces these contaminants. The results of this treatment on copper surfaces and the resulting modification to the dielectric are reviewed.

Development of a polybenzoxazine/TSBA-15 composite from the renewable resource cardanol for low-k applications

RSC Advances ◽  
2015 ◽  
Vol 5 (60) ◽  
pp. 48898-48907 ◽  
Author(s):  
Vaithilingam Selvaraj ◽  
K. P. Jayanthi ◽  
Thatchanamurthy Lakshmikandhan ◽  
Muthukaruppan Alagar
Keyword(s):  
Dielectric Constant ◽  
Renewable Resource ◽  
Low Dielectric Constant ◽  
Low Dielectric ◽  
Low K

Scheme shows the synthesis of a cardanol-based polybenzoxazine composite for low-dielectric constant applications.

Novel Materials as Interlayer Low-K Dielectrics for CMOS Interconnect Applications

2011 ◽  
Vol 110-116 ◽  
pp. 5380-5383
Author(s):  
Tejas R. Naik ◽  
Veena R. Naik ◽  
Nisha P. Sarwade
Keyword(s):  
Dielectric Constant ◽  
Integrated Circuits ◽  
Dielectric Materials ◽  
Low Dielectric Constant ◽  
Interlayer Dielectric ◽  
Novel Materials ◽  
Low Dielectric ◽  
Processing Properties ◽  
New Generation ◽  
Low K

Scaling down the integrated circuits has resulted in the arousal of number of problems like interaction between interconnect, crosstalk, time delay etc. These problems can be overcome by new designs and by use of corresponding novel materials, which may be a solution to these problems. In the present paper we try to put forward very recent development in the use of novel materials as interlayer dielectrics (ILDs) having low dielectric constant (k) for CMOS interconnects. The materials presented here are porous and hybrid organo-inorganic new generation interlayer dielectric materials possessing low dielectric constant and better processing properties.

Sign in / Sign up

Export Citation Format

Share Document