Robust spin-on-glass poly(methyl)silsesquioxane-based low-k materials derived from a cyclic siloxane precursor

RSC Advances ◽  
2015 ◽  
Vol 5 (82) ◽  
pp. 66511-66517 ◽  
Author(s):  
Albert S. Lee ◽  
Sung Yeoun Oh ◽  
Seung-Sock Choi ◽  
He Seung Lee ◽  
Seung Sang Hwang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Dielectric Constant ◽  
Low Dielectric Constant ◽  
Cyclic Siloxane ◽  
Low Dielectric ◽  
Methyl Silsesquioxane ◽  
Low K

Low dielectric constant poly(methyl)silsesquioxane spin-on-glass resins incorporating a cyclic precursor exhibited exceptional mechanical properties to withstand CMP processes.

The characterization and preparation of porous low dielectric films using various cyclodextrins as template materials

2003 ◽  
Vol 766 ◽  
Author(s):  
Jin-Heong Yim ◽  
Jung-Bae Kim ◽  
Hyun-Dam Jeong ◽  
Yi-Yeoul Lyu ◽  
Sang Kook Mah ◽  
...  
Keyword(s):  
Thin Film ◽  
Mechanical Properties ◽  
Dielectric Constant ◽  
Pore Structure ◽  
Pore Diameter ◽  
Dielectric Films ◽  
Low Dielectric Constant ◽  
Cyclodextrin Derivatives ◽  
Low Dielectric ◽  
Low K

AbstractPorous low dielectric films containing nano pores (∼20Å) with low dielectric constant (<2.2), have been prepared by using various kinds of cyclodextrin derivatives as porogenic materials. The pore structure such as pore size and interconnectivity can be controlled by changing functional groups of the cyclodextrin derivatives. We found that mechanical properties of porous low-k thin film prepared with mCSSQ (modified cyclic silsesquioxane) precursor and cyclodextrin derivatives were correlated with the pore interconnection length. The longer the interconnection length of nanopores in the thin film, the worse the mechanical properties of the thin film (such as hardness and modulus) even though the pore diameter of the films were microporous (∼2nm).

The Effect of Porogen on Physical Properties in MTMS-BTMSE Spin-on Organosilicates

2005 ◽  
Vol 875 ◽  
Author(s):  
B.R. Kim ◽  
J. M. Son ◽  
J.W. Kang ◽  
K.Y. Lee ◽  
K.K. Kang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Dielectric Constant ◽  
Low Dielectric Constant ◽  
Porous Films ◽  
Low Dielectric ◽  
Lower Dielectric Constant ◽  
Superior Mechanical Properties ◽  
Lift Off ◽  
Rc Delay ◽  
Low K

AbstractDecreasing the circuit dimensions is driving the need for low-k materials with a lower dielectric constant to reduce RC delay, crosstalk, and power consumption. In case of spin-on organosilicate low-k films, the incorporation of a porogen is regarded as the only foreseeable route to decrease dielectric constant of 2.2 or below by changing a packing density. In this study, MTMS-BTMSE copolymers that had superior mechanical properties than MSSQ were blended with decomposable polymers as pore generators. While adding up to 40 wt % porogen into MTMS:BTMSE=100:50 matrix, optical, electrical, and mechanical properties were measured and the pore structure was also characterized by PALS. The result confirmed that there existed a tradeoff in attaining the low dielectric constant and desirable mechanical strength, and no more pores than necessary to achieve the dielectric objective should be incorporated. When the dielectric constant was fixed to approximately 2.3 by controlling BTMSE and porogen contents simultaneously, the thermo-mechanical properties of the porous films were also investigated for the comparison purpose. Under the same dielectric constant, the increase in BTMSE and porogen contents led to improvement in modulus measured by the nanoindentation technique but deterioration of adhesion strength obtained by the modified edge lift-off test.

Structire, Properties, and Process Characteristics of Low-K Materials Prepared by PECVD

1999 ◽  
Vol 565 ◽  
Author(s):  
Y. Shimogaki ◽  
S. W. Lim ◽  
E. G. Loh ◽  
Y. Nakano ◽  
K. Tada ◽  
...  
Keyword(s):  
Growth Rate ◽  
Dielectric Constant ◽  
Gas Flow ◽  
Structural Changes ◽  
Silicon Oxide ◽  
Reactive Species ◽  
Low Dielectric Constant ◽  
Low Dielectric ◽  
Step Coverage ◽  
Low K

AbstractLow dielectric constant F-doped silicon oxide films (SiO:F) can be prepared by adding fluorine source, like as CF4 to the conventional PECVD processes. We could obtain SiO:F films with dielectric constant as low as 2.6 from the reaction mixture of SiH4/N2 O/CF4. The structural changes of the oxides were sensitively detected by Raman spectroscopy. The three-fold ring and network structure of the silicon oxides were selectively decreased by adding fluorine into the film. These structural changes contribute to the decrease ionic polarization of the film, but it was not the major factor for the low dielectric constant. The addition of fluorine was very effective to eliminate the Si-OH in the film and the disappearance of the Si-OH was the key factor to obtain low dielectric constant. A kinetic analysis of the process was also performed to investigate the reaction mechanism. We focused on the effect of gas flow rate, i.e. the residence time of the precursors in the reactor, on growth rate and step coverage of SiO:F films. It revealed that there exists two species to form SiO:F films. One is the reactive species which contributes to increase the growth rate and the other one is the less reactive species which contributes to have uniform step coverage. The same approach was made on the PECVD process to produce low-k C:F films from C2F4, and we found ionic species is the main precursor to form C:F films.

Radiation effects in low dielectric constant methyl--silsesquioxane films

2002 ◽  
Vol 49 (6) ◽  
pp. 2724-2728 ◽  
Author(s):  
M.P. Petkov ◽  
K.G. Lynn ◽  
K.P. Rodbell ◽  
W. Volksen ◽  
R.D. Miller
Keyword(s):  
Dielectric Constant ◽  
Radiation Effects ◽  
Low Dielectric Constant ◽  
Low Dielectric ◽  
Methyl Silsesquioxane

Chemical-Mechanical Planarization of Low-k Polymers for Advanced IC Structures

2002 ◽  
Vol 124 (4) ◽  
pp. 362-366 ◽  
Author(s):  
Christopher L. Borst ◽  
Dipto G. Thakurta ◽  
William N. Gill ◽  
Ronald J. Gutmann
Keyword(s):  
Dielectric Constant ◽  
Surface Chemistry ◽  
Chemical Mechanical Planarization ◽  
Low Dielectric Constant ◽  
Chemical Company ◽  
Low Dielectric ◽  
Scale Models ◽  
Physically Based ◽  
Thickness Measurements ◽  
Low K

Successful integration of copper and low dielectric constant (low-k) materials is dependent on robust chemical-mechanical planarization (CMP) during damascene patterning. This process includes the direct removal of copper and interaction of the copper slurry with the underlying dielectric. Experiments were designed and performed to examine the CMP of two low-k polymers from Dow Chemical Company, bis-benzocyclobutene (BCB*, k=2.65) and “silicon-application low-k material” (SiLK* resin, k=2.65) with both acidic slurries suitable for copper damascene patterning and a KH phthalate-based model slurry developed for SiLK. Blanket polymer films were polished in order to determine the interactions that occur when copper and liner materials are removed by the damascene CMP process. Removal rates were obtained from material thickness measurements, post-CMP surface topography from AFM scans, and post-CMP surface chemistry from XPS measurements. Physically based wafer-scale models are presented which are compatible with the experimental results.

scholarly journals Preparation of Polyimide Films with Ultra-Low Dielectric Constant by Phase Inversion

Crystals ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 1383
Author(s):  
Panpan Zhang ◽  
Lize Zhang ◽  
Ke Zhang ◽  
Jiupeng Zhao ◽  
Yao Li
Keyword(s):  
Mechanical Properties ◽  
Dielectric Constant ◽  
Phase Inversion ◽  
Polyimide Film ◽  
Porous Film ◽  
Breakdown Field ◽  
Low Dielectric Constant ◽  
Low Dielectric ◽  
Dielectric Performance ◽  
Fluorinated Graphene

Due to the high value of its dielectric constant, polyimide does not meet the requirements of the development of integrated circuits and high-frequency printed circuits. The development of novel low dielectric constant polyimide materials for the preparation of flexible copper clad laminates is of theoretical and practical significance in the application of polyimide for 5G communications. In this work, different fluorinated graphene/polyamic acids (FG/PAA) were used as the precursor, and the porous polyimide film was successfully prepared by phase inversion. The dielectric constant of the porous polyimide film is relatively low, being less than 1.7. When the content of fluorinated graphene is 0.5 wt%, the overall dielectric performance of the porous film is the best, with a dielectric constant of 1.56 (10 kHz) and a characteristic breakdown field strength of 56.39 kV/mm. In addition, the mechanical properties of the film are relatively poor, with tensile strengths of 13.87 MPa (0.2 wt%), 13.61 MPa (0.5 wt%), and 6.25 MPa (1.0 wt%), respectively. Therefore, further improving the breakdown resistance and mechanical properties of the porous film is essential for the application of porous ultra-low dielectric polyimide materials.

First Pass Study of Surface Modified Porous Low-k by Ion Implantation for Zero Thickness Barrier Requirement of Cu/MSQ/Si Stacks in Copper Metallization Scheme

2005 ◽  
Vol 863 ◽  
Author(s):  
Alok Nandini ◽  
U. Roy ◽  
Zubin P. Patel ◽  
H. Bakhru
Keyword(s):  
Mechanical Properties ◽  
Dielectric Constant ◽  
Ion Implantation ◽  
Porous Silica ◽  
Surface Hardness ◽  
Low Dielectric Constant ◽  
Copper Metallization ◽  
Porous Films ◽  
Critical Dimensions ◽  
Low Dielectric

AbstractLow-κ dielectrics have to meet stringent requirements in material properties in order to be successfully integrated. A particularly difficult challenge for material development is to obtain a combination of low dielectric constant with good thermal and mechanical properties. Incorporation of low dielectric constant materials such as porous silica based materials as a replacement to conventional dielectrics like SiO2 and use of Cu metallization schemes has become a necessity as critical dimensions of devices decrease. This paper is focused on the challenges in developing materials with low dielectric constant but strong thermo mechanical properties. Thin films of Ultra-Low materials such as porous Methyl Silsesquioxane (MSQ) (κ=2.2) were implanted with argon 1 × 1016 cm-2 dose at energies varying from 20 to 50 keV at room temperature. This work shows that the surface hardness of the porous films can be improved five times as compared to the as-deposited porous films by implanting Ar with 1 × 1016 cm-2 doses at 20 keV, sacrificing only a slight increase (∼9%) in dielectric constant (e.g., from 2.2 to 2.4). The hardness persists after 4500C annealing. In this current work, an ion implantation strategy was pursued to create a SiO2-like surface on MSQ. The effects of implantation parameters on the barrier property and bulk stability of MSQ were then studied. The results reveal one possible route to attain the “zero barrier thickness” requirement for interconnects systems.

Development of a polybenzoxazine/TSBA-15 composite from the renewable resource cardanol for low-k applications

RSC Advances ◽  
2015 ◽  
Vol 5 (60) ◽  
pp. 48898-48907 ◽  
Author(s):  
Vaithilingam Selvaraj ◽  
K. P. Jayanthi ◽  
Thatchanamurthy Lakshmikandhan ◽  
Muthukaruppan Alagar
Keyword(s):  
Dielectric Constant ◽  
Renewable Resource ◽  
Low Dielectric Constant ◽  
Low Dielectric ◽  
Low K

Scheme shows the synthesis of a cardanol-based polybenzoxazine composite for low-dielectric constant applications.

scholarly journals BN Nanoparticles/Si3N4Wave-Transparent Composites with High Strength and Low Dielectric Constant

2011 ◽  
Vol 2011 ◽  
pp. 1-5 ◽  
Author(s):  
Dongliang Zhao ◽  
Yujun Zhang ◽  
Hongyu Gong ◽  
Baoxin Zhu ◽  
Xiaoyu Zhang
Keyword(s):  
Mechanical Properties ◽  
Dielectric Constant ◽  
Volume Content ◽  
Bending Strength ◽  
High Strength ◽  
Low Dielectric Constant ◽  
Low Dielectric ◽  
Transparent Composites ◽  
Gas Pressure Sintering ◽  
Dielectric And Mechanical Properties

Si3N4wave-transparent composites with different volume content of BN nanoparticles (BNnp/Si3N4) were prepared by gas pressure sintering at 1800°C in N2atmosphere. The effects of BN nanoparticles on the dielectric and mechanical properties of BNnp/Si3N4composites were investigated. The results showed that the addition of the BN nanoparticles improved the dielectric properties of BNnp/Si3N4composites effectively and decreased the mechanical properties. When the volume content of BN nanoparticles was 10%, the dielectric constant and dielectric loss tangent were 4.31 and 0.006, respectively, and the bending strength and fracture toughness still reached 198.9 MPa and 3.36 MPa·m1/2. The high mechanical properties of BNnp/Si3N4composites with 10% BN nanoparticles were attributed to homogeneously dispersed BN nanoparticles which were embedded in the pores formed by the rod-likeβ-Si3N4.

Sign in / Sign up

Export Citation Format

Share Document