Ceramic IR Emitter with Spectral Match to GaSb PV Cells for TPV

2013 ◽  
Vol 1493 ◽  
pp. 11-22 ◽  
Author(s):  
Lewis M. fraas ◽  
Kuanrong Qiu

ABSTRACTA high temperature ceramic selective emitter for thermophotovoltaic (TPV) electric generators is described with a spectral match to GaSb IR cells. While solar cells generate electricity quietly and are lightweight, traditional solar cells are used with sunlight and only generate electricity during the day. Workers at JX Crystals invented the GaSb IR cell as a booster cell to demonstrate a solar cell conversion efficiency of 35%. JX Crystals now makes these IR cells. In TPV, these cells can potentially be used with flame heated ceramic emitters to generate electricity quietly day and night. One of the most important requirements for TPV is a good spectral match between the ceramic IR emitted and the IR PV cells. The first problem is to find, demonstrate, and integrate a doped ceramic IR emitter with a spectral match to these GaSb cells. Recently, nickel oxide and cobalt oxide doped MgO-based ceramics have been shown experimentally and theoretically to have spectral selectivity but no attempts have been made to integrate these ceramic IR emitters into a fully operational TPV generator. Herein, we review the history of TPV and note that a key to future progress will be the integration of an appropriate ceramic emitter with cells and a burner to demonstrate an operational TPV generator. Integrating TPV into a residential boiler is discussed as a potential future large volume commercial market.

2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
Jiří Vanek ◽  
Jan Dolensky ◽  
Zdenek Chobola ◽  
Mirek Luňák ◽  
Aleš Poruba

This paper brings the comparison of solar cell conversion efficiency and results from a noise spectroscopy and microplasma presence to evaluate the solar cell technology. Three sets of monocrystalline silicon solar cells (c-Si) varying in front side phosphorus doped emitters were produced by standard screen-printing technique. From the measurements it follows that the noise spectral density related to defects is of 1/ftype and its magnitude. It has been established that samples showing low noise feature high-conversion efficiency. The best results were reached for a group solar cells with selective emitter structure prepared by double-phosphorus diffusion process.


2019 ◽  
Vol 958 ◽  
pp. 1-4
Author(s):  
Ricardo de Freitas Cabral ◽  
Marcelo Henrique Prado da Silva ◽  
Eduardo de Sousa Lima

In this paper are presented both the fill factor of 0.75 and an efficiency approaching 14.64 % of solar cell, which were achieved, despite the non-optimized process. A new Cu-based additive of pastes were applied for formation of front contact on silicon solar cells. Front contact were screen-printed using commercial silver paste containing the CuXX additive prepared at laboratory. It is the world's first copper based paste appropriate for high-temperature production processes of front contact of the solar cell.


2013 ◽  
Vol 32 (2) ◽  
pp. 97-105 ◽  
Author(s):  
Junli Xu ◽  
Geir Martin Haarberg

AbstractSilicon is the most common material used in solar cells. High cost of silicon restricts the widely use of PV power. In order to make solar cells more accessible and affordable, it is strongly needed to develop a new and low-cost production process of solar energy silicon (SoG-Si). Electrodeposition of SoG-Si films appears to be a cost saving technique since solidification and sawing steps which contribute significantly to the overall cost of solar cells will be bypassed. Electrodeposition of SoG-Si has been evaluated during the last three decades, and some of them have shown promising results. Thermodynamic and kinetic considerations which relate to the electrodeposition of silicon are discussed, and progresses towards the developments of the electrodeposition of silicon in high temperature molten salts are reviewed in this paper.


2015 ◽  
Vol 1771 ◽  
pp. 25-32
Author(s):  
Xiangheng He ◽  
Tingkai Li

ABSTRACTThe a-Si/c-Si Heterojunction Technology (HJT) or Heterojunction with intrinsic thin layer (HIT) solar cell have been fabricated in mass production,the average conversion efficiency of HJT solar cells with 3 bus bar, 5 bus bar and smart wire structures have reached 20%, 21% and 22% respectively. One of the biggest obstructions for HIT module manufacturing is the Cell-to-Module (CTM) stringing process where much power loss happened due to high temperature. The higher temperature in stringing process makes passivation quality worse and introduces much more defects. In this article, we present our investigation on CTM string connection methods, especially on which undergo low temperature to avoid thermal micro damage on cell’s functional structure. Several kinds of string connection are elaborated. The discussion will give some directions for further laboratory research and HJT manufacturing.


2019 ◽  
Vol 293 ◽  
pp. 65-72
Author(s):  
Małgorzata Musztyfaga-Staszuk

In this paper are presented both the fill factor of 0.75 and an efficiency approaching 14.64 % of solar cell, which were achieved, despite the non-optimized process. A new Cu-based additive of pastes were applied for formation of front contact on silicon solar cells. Front contact were screen-printed using commercial silver paste containing the CuXX additive prepared at laboratory. It is the world's first copper based paste appropriate for high-temperature production processes of front contact of the solar cell.


2020 ◽  
Vol 8 (21) ◽  
pp. 10983-10988 ◽  
Author(s):  
Junhui Miao ◽  
Bin Meng ◽  
Zicheng Ding ◽  
Jun Liu ◽  
Lixiang Wang

An organic solar cell based on a small molecule donor and a polymer acceptor exhibits a PCE of 9.5% and can operate at high temperature. It retains 84% of its PCE after thermal treatment at 150 °C for three days.


Nanoscale ◽  
2014 ◽  
Vol 6 (10) ◽  
pp. 5193-5199 ◽  
Author(s):  
Han-Don Um ◽  
Kwang-Tae Park ◽  
Jin-Young Jung ◽  
Xiaopeng Li ◽  
Keya Zhou ◽  
...  

A highly efficient silicon nanowire solar cell has been developed by integrating a self-aligned selective-emitter that spontaneously decouples the emitter and metallization regions.


Nanomaterials ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 547
Author(s):  
Xianfeng Zhang ◽  
Qingxuan Sun ◽  
Maoxi Zheng ◽  
Zhuohua Duan ◽  
Yuehui Wang

Binary nanoparticle inks comprising Ag2Se, In2Se3, and Ga2Se3 were fabricated via a wet ball-milling method and were further used to fabricate AgInGaSe2 (AIGS) precursors by sequentially spraying the inks onto a Mo-coated substrate. AIGS precursors were annealed under a Se atmosphere for 1 h at 570 °C. Na2Se thin layers of varying thicknesses (0, 5, 10, and 20 nm) were vacuum-evaporated onto the Mo layer prior to the AIGS precursors being fabricated to investigate the influence on AIGS solar cells. Sodium plays a critical role in improving the material properties and performance of AIGS thin-film solar cells. The grain size of the AIGS films was significantly improved by sodium doping. Secondary ion mass spectroscopy illustrated slight surficial sodium segregation and heavy sodium segregation at the AIGS/Mo interface. Double-graded band profiles were observed in the AIGS films. With the increase in Na2Se thickness, the basic photovoltaic characteristics of the AIGS solar cells were significantly improved. The highest solar cell conversion efficiency of 6.6% (open-circuit voltage: 775.6 mV, short-circuit current: 15.5 mA/cm2, fill factor: 54.9%, area: 0.2 cm2) was obtained when the Na2Se thickness was 20 nm.


Author(s):  
Rachid Chaoui ◽  
Bedra Mahmoudi ◽  
Yasmine Si Ahmed

Stain etching of silicon solar cells in HF-FeCl3-H2O solutions as a last step in the processing sequence is reported. The etching was carried out without protecting the screen printed contacts. Following optimization of the solution composition and using very short etching times to alleviate the contact degradation problem, the solar cell weighted reflectance (Rw) between 400 and 1100 nm could be reduced from 38.23% to 11.54%. For the best small area cell (~20 cm2), the PS antireflective layer led to a relative improvement of 62.74% in the short-circuit current density, the FF was enhanced by 5.5% absolute, the open-circuit voltage was increased by 1.2 mV and the cell conversion efficiency was raised by 4.1% absolute from 5.4% to 9.5%. The best large area cell (~78 cm2) shows the following changes after porous layer formation: a relative improvement of 45.43% in the short-circuit current density, an improvement in the FF of 7.4% absolute, an increase in the open-circuit voltage by 7.5 mV and an enhancement in the cell efficiency by 4.0% absolute from 6.2% to 10.2%. This method shows a great potential for the cost-effective reduction of reflectance losses in industrial silicon solar cell manufacturing.


2019 ◽  
Author(s):  
Matthew Morgan ◽  
Maryam Nazari ◽  
Thomas Pickl ◽  
J. Mikko Rautiainen ◽  
Heikki M. Tuononen ◽  
...  

The electrophilic borylation of 2,5-diarylpyrazines results in the formation of boron-nitrogen doped dihydroindeno[1,2-<i>b</i>]fluorene which can be synthesized via mildly air-sensitive techniques and the end products handled readily under atmosphereic conditions. Through transmetallation via diarylzinc reagents a series of derivatives were sythesized which show broad absorption profiles that highlight the versatility of this backbone to be used in organic solar cell devices. These compounds can be synthesized in large yields, in alow number of steps and functionalized at many stages along the way providing a large depth of possibilities. Exploratory device paramaters were studied and show PCE of 2%.


Sign in / Sign up

Export Citation Format

Share Document