The Effect of Microwave Radiation on Tensile Properties of Silkworm (B. mori) Silk

2011 ◽  
Vol 1301 ◽  
Author(s):  
Emily J. Reed ◽  
Christopher Viney
Keyword(s):  
Mechanical Properties ◽  
Mechanical Behavior ◽  
Microwave Radiation ◽  
Power Output ◽  
Microwave Oven ◽  
Test Results ◽  
Sample Storage ◽  
Humid Environment ◽  
Testing Environments ◽  
Silkworm Silk

ABSTRACTWe have developed a reproducible protocol for studying the effect of microwave radiation on the mechanical behavior of Bombyx mori cocoon silk. In the course of this work, we identified multiple improvements that can be made to ASTM F 1317-98, the standard according to which microwave oven power output is calibrated.Exposure to microwaves does not significantly affect mechanical properties of silkworm silk, if samples are kept in a desiccator after degumming (or after degumming and microwaving) and prior to testing in a dry environment. This finding contrasts with previous work in which samples were not kept in a desiccator, and were tested in a relatively humid environment.Because the effect of microwave radiation on the mechanical behavior of silk is sensitive to ambient moisture, meaningful comparison or pooling of test results acquired in different laboratories is contingent on standardization of both the sample storage environment and the environment in which samples are tested. Interpretation of the extensive existing literature on silk mechanical properties must take account of the reality that the sample storage and testing environments are not standardized and are usually not reported.

scholarly journals Numerical Investigation of Influences of Drilling Arrangements on the Mechanical Behavior and Energy Evolution of Coal Models

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Tong-bin Zhao ◽  
Wei-yao Guo ◽  
Feng-hai Yu ◽  
Yun-liang Tan ◽  
Bin Huang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Energy Dissipation ◽  
Mechanical Behavior ◽  
Rock Burst ◽  
Test Results ◽  
Energy Index ◽  
Energy Evolution ◽  
Compression Tests ◽  
Influencing Mechanism ◽  
Drilling Method

Destress drilling method is one of the commonly used methods for mitigating rock bursts, especially in coal mining. To better understand the influences of drilling arrangements on the destress effect is beneficial for rock burst mitigation. This study first introduced the rock burst mitigation mechanism of the destress drilling method and then numerically investigated the influences of drilling arrangements on the mechanical properties of coal models through uniaxial compression tests. Based on the test results, the energy evolution (i.e., the energy dissipation and bursting energy indexes) influenced by different drilling arrangements was analyzed. When the drilling diameter, the number of drilling holes in one row, or the number of drilling rows increases, the bearing capacity of specimens nonlinearly decreases, but the energy dissipation index increases. In addition, the drilling diameter or the number of drilling holes in one row affects the failure mode weakly, which is different from that of the number of drilling rows. Consequently, the bursting energy index decreases as increasing the drilling diameter or the number of drilling holes in one row, but as increasing the number of drilling rows, the variation law of bursting energy index is not obvious. At last, the influencing mechanism of drilling arrangement on the rock burst prevention mechanism of the destress drilling method was discussed and revealed.

Experiment Study on Mechanical Properties of Shotcrete under Heat Injury Environment of High Ground Temperature Tunnel

2013 ◽  
Vol 785-786 ◽  
pp. 291-294 ◽  
Author(s):  
Yu Fan ◽  
Sheng Ai Cui ◽  
Tao Chen ◽  
Zhi Hua Zhou
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Ground Temperature ◽  
Water Tank ◽  
Test Results ◽  
Experiment Study ◽  
Curing Conditions ◽  
Heat Injury ◽  
Humid Environment ◽  
Temperature Impact

With the tunnel growing more long and deep,heat injury problems have become increasingly prominent.In order to analyze how would the environment of high ground temperature impact on compressive strength of shotcrete, experiment was designed to explore the compressive strength of C25 shotcrete at 28d age by simulating environmental. The test results show that: water tank and the oven can more accurately simulate the natural hot-humid and hot-dry environment; Compared to the standard curing conditions, Whether in the hot-humid environment or hot-dry environment, the compressive strength of shotcrete is decreased. Mixed with 25% fly ash can improve the compressive strength of shotcrete in hot-humid environment.

MODELISATION DE L'INFLUENCE DU TRAITEMENT THERMIQUE SUR LES PROPRIETES MECANIQUES DES ALLIAGES ALUMINIUM-CUIVRE (Al-Cu)

2015 ◽  
Vol 10 (2) ◽  
pp. 2753-2761
Author(s):  
Saad El Madani ◽  
S. ELHAMZI ◽  
A. IBNLFASSI ◽  
L. ZERROUK ◽  
O. BEN LENDA ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Mechanical Behavior ◽  
Solidification Process ◽  
Traitement Thermique ◽  
Homogenization Process ◽  
Fundamental Reason ◽  
Segregation Phenomenon ◽  
Proprietes Mecaniques ◽  
Cooling Velocity ◽  
Copper Effect

In order to master and improve the quality and properties of the final products, the major industrial challenge lies in the possibility of controlling the morphology, size of microstructures that reside within the molded pieces, as well as their defects; this is the fundamental reason according to which we are more and more interested in mastering the growth and germination of such alloys, as well as the developing structures, at the time of solidification process. The modeling reveals as a valuable aid in the mastery of the formation of such heterogeneousness: segregation cells that are incompatible with industrial requirements.   The whole work focuses upon the modeling of the segregation phenomenon of the four hypoeutectic alloys, Al1%Cu, Al2%Cu, Al3%Cu et Al4%Cu, as well as the copper effect upon certain mechanical properties of aluminum. Usually, the microstructure and mechanical behavior of such alloys as Al-Cu are directly influenced by some parameters such as composition, cooling velocity and homogenization process.

Sunlight exposure: the effects on the performance of paragliding fabric

2018 ◽  
Vol 69 (05) ◽  
pp. 381-389
Author(s):  
MENGÜÇ GAMZE SÜPÜREN ◽  
TEMEL EMRAH ◽  
BOZDOĞAN FARUK
Keyword(s):  
Mechanical Properties ◽  
Aging Process ◽  
Air Permeability ◽  
Sunlight Exposure ◽  
Test Results ◽  
Coating Materials ◽  
Strength Tests ◽  
Before And After ◽  
The Relationship ◽  
Dark Blue

This study was designed to explore the relationship between sunlight exposure and the mechanical properties of paragliding fabrics which have different colors, densities, yarn counts, and coating materials. This study exposed 5 different colors of paragliding fabrics (red, turquoise, dark blue, orange, and white) to intense sunlight for 150 hours during the summer from 9:00 a.m. to 3:00 p.m. for 5 days a week for 5 weeks. Before and after the UV radiation aging process, the air permeability, tensile strength, tear strength, and bursting strength tests were performed. Test results were also evaluated using statistical methods. According to the results, the fading of the turquoise fabric was found to be the highest among the studied fabrics. It was determined that there is a significant decrease in the mechanical properties of the fabrics after sunlight exposure. After aging, the fabrics become considerably weaker in the case of mechanical properties due to the degradation in both the dyestuff and macromolecular structure of the fiber

scholarly journals Experimental and Numerical Evaluation of Mechanical Properties of 3D-Printed Stainless Steel 316L Lattice Structures

2021 ◽  
Author(s):  
M. Carraturo ◽  
G. Alaimo ◽  
S. Marconi ◽  
E. Negrello ◽  
E. Sgambitterra ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Mechanical Behavior ◽  
Numerical Simulations ◽  
Uniaxial Tensile ◽  
Uniaxial Tensile Test ◽  
Lattice Structures ◽  
Stainless Steel 316L ◽  
Research Attention ◽  
Octet Truss

AbstractAdditive manufacturing (AM), and in particular selective laser melting (SLM) technology, allows to produce structural components made of lattice structures. These kinds of structures have received a lot of research attention over recent years due to their capacity to generate easy-to-manufacture and lightweight components with enhanced mechanical properties. Despite a large amount of work available in the literature, the prediction of the mechanical behavior of lattice structures is still an open issue for researchers. Numerical simulations can help to better understand the mechanical behavior of such a kind of structure without undergoing long and expensive experimental campaigns. In this work, we compare numerical and experimental results of a uniaxial tensile test for stainless steel 316L octet-truss lattice specimen. Numerical simulations are based on both the nominal as-designed geometry and the as-build geometry obtained through the analysis of µ-CT images. We find that the use of the as-build geometry is fundamental for an accurate prediction of the mechanical behavior of lattice structures.

Finite Element Analysis of Reinforced Concrete Beams with Exterior FRP Shell

2011 ◽  
Vol 243-249 ◽  
pp. 1461-1465
Author(s):  
Chuan Min Zhang ◽  
Chao He Chen ◽  
Ye Fan Chen
Keyword(s):  
Mechanical Properties ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Reinforced Concrete ◽  
Concrete Beams ◽  
Reinforced Concrete Beams ◽  
Test Results ◽  
Contact Interface ◽  
Accurate Calculation ◽  
Element Analysis

The paper makes an analysis of the reinforced concrete beams with exterior FRP Shell in Finite Element, and compares it with the test results. The results show that, by means of this model, mechanical properties of reinforced concrete beams with exterior FRP shell can be predicted better. However, the larger the load, the larger deviation between calculated values and test values. Hence, if more accurate calculation is required, issues of contact interface between the reinforced concrete beams and the FRP shell should be taken into consideration.

Improving the Strength of Abrasive Wheels and Optimizing the Control over the Strength of Composite Abrasive Materials

2019 ◽  
Vol 946 ◽  
pp. 380-385
Author(s):  
Boris A. Chaplygin ◽  
Viacheslav V. Shirokov ◽  
Tat'yana A. Lisovskaya ◽  
Roman A. Lisovskiy
Keyword(s):  
Mechanical Properties ◽  
Test Results ◽  
Key Factors ◽  
Special Equipment ◽  
Material Density ◽  
Factors Affecting ◽  
Control Factors ◽  
Reinforcing Material ◽  
Special Studies ◽  
First Time

The strength of abrasive wheels is one of the key factors affecting the performance of abrasive machining. The paper discusses ways to improve the strength of abrasive wheels. The stress-state mathematical model presented herein is a generalization of the existing models. It is used herein to find for the first time that there are numerous optimal combinations of the elastic modulus and reinforcing material density, which result in the same minimum value of the objective function. It is found out that increasing the radius of the reinforcing component while also optimizing the mechanical properties of its material may increase the permissible breaking speed of the wheel several times. We herein present a regression equation and a nomogram for finding the optimal combination of control factors. Conventional methods for testing the mechanical properties of materials, which have been proven reliable for testing metals and alloys, are not as reliable for testing abrasive materials, as the test results they generate are not sufficiently stable or accurate. We therefore propose an alternative method that does not require any special equipment or special studies.

scholarly journals Decoupling of Mechanical and Transport Properties in Organogels via Solvent Variation

Gels ◽  
2021 ◽  
Vol 7 (2) ◽  
pp. 61
Author(s):  
Kenneth P. Mineart ◽  
Cameron Hong ◽  
Lucas A. Rankin
Keyword(s):  
Mechanical Properties ◽  
Mechanical Behavior ◽  
Transdermal Drug Delivery ◽  
Triblock Copolymer ◽  
Polymer Concentration ◽  
Mineral Oil ◽  
Solute Diffusion ◽  
Oil Viscosity ◽  
Chain Entanglement ◽  
Mineral Oils

Organogels have recently been considered as materials for transdermal drug delivery media, wherein their transport and mechanical properties are among the most important considerations. Transport through organogels has only recently been investigated and findings highlight an inextricable link between gels’ transport and mechanical properties based upon the formulated polymer concentration. Here, organogels composed of styrenic triblock copolymer and different aliphatic mineral oils, each with a unique dynamic viscosity, are characterized in terms of their quasi-static uniaxial mechanical behavior and the internal diffusion of two unique solute penetrants. Mechanical testing results indicate that variation of mineral oil viscosity does not affect gel mechanical behavior. This likely stems from negligible changes in the interactions between mineral oils and the block copolymer, which leads to consistent crosslinked network structure and chain entanglement (at a fixed polymer concentration). Conversely, results from diffusion experiments highlight that two penetrants—oleic acid (OA) and aggregated aerosol-OT (AOT)—diffuse through gels at a rate inversely proportional to mineral oil viscosity. The inverse dependence is theoretically supported by the hydrodynamic model of solute diffusion through gels. Collectively, our results show that organogel solvent variation can be used as a design parameter to tailor solute transport through gels while maintaining fixed mechanical properties.

scholarly journals Understanding the Barrier and Mechanical Behavior of Different Nanofillers in Chitosan Films for Food Packaging

Polymers ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 721 ◽  
Author(s):  
João Pires ◽  
Camila Damásio de Paula ◽  
Victor Gomes Lauriano Souza ◽  
Ana Luísa Fernando ◽  
Isabel Coelhoso
Keyword(s):  
Mechanical Properties ◽  
Mechanical Behavior ◽  
Food Packaging ◽  
Scientific Research ◽  
Barrier Properties ◽  
Plastic Pollution ◽  
Functional Attributes ◽  
Chitosan Films ◽  
Commercial Applications ◽  
Innovative Techniques

The continuous petroleum-based plastics manufacturing generates disposal issues, spreading the problem of plastic pollution and its rise in the environment. Recently, innovative techniques and scientific research promoted biopolymers as the primary alternative for traditional plastics, raising and expanding global bioplastic production. Due to its unmatched biological and functional attributes, chitosan (Ch) has been substantially explored and employed as a biopolymeric matrix. Nevertheless, the hydrophilicity and the weak mechanical properties associated with this biopolymer represent a significant intrinsic restriction to its implementation into some commercial applications, namely, in food packaging industries. Distinct methodologies have been utilized to upgrade the mechanical and barrier properties of Ch, such as using organic or inorganic nanofillers, crosslinkers, or blends with other polymers. This review intends to analyze the most recent works that combine the action of different nanoparticle types with Ch films to reinforce their mechanical and barrier properties.

Sign in / Sign up

Export Citation Format

Share Document