Self-organization of phthalocyanines on Al2O3 (1120) in aligned and ordered films

2004 ◽  
Vol 19 (7) ◽  
pp. 2061-2067 ◽  
Author(s):  
E. Barrena ◽  
J.O. Ossó ◽  
F. Schreiber ◽  
M. Garriga ◽  
M.I. Alonso ◽  
...  
Keyword(s):  
Atomic Force Microscopy ◽  
Self Organization ◽  
X Ray Diffraction ◽  
Direction Parallel ◽  
Force Microscopy ◽  
Molecular Arrangement ◽  
Atomic Force ◽  
Organization Process ◽  
Microscopy Images ◽  
Molecular Stacking

We studied the self-organization process of F16CuPc films (20–30 ML) on stepped Al2O3 (1120) substrates. X-ray diffraction measurements revealed a highly ordered layered structure with the molecules in a nearly upright configuration. The morphology, investigated by atomic force microscopy, consisted of long (several microns) and narrow (20–100 nm) needlelike terraces unidirectionally aligned along one of the main crystallographic directions of the Al2O3 (1120) surface. High resolution atomic force microscopy images revealed in-plane molecular order with the molecular stacking direction parallel to the needlelike terraces. Such anisotropic morphology is the result of a self-organization process of F16CuPc in elongated crystallites driven to a preferential orientation by the interaction with the substrate. Spectroscopic ellipsometry showed that these films exhibit anisotropic optical properties correlated with the molecular arrangement.

Micro- and Nanostructure Evolution with Exploding Wires

2005 ◽  
Vol 903 ◽  
Author(s):  
Vandana NLN ◽  
P. Sen
Keyword(s):  
Atomic Force Microscopy ◽  
Pattern Formation ◽  
Self Organization ◽  
Plasma Current ◽  
Concentric Ring ◽  
Exploding Wires ◽  
Force Microscopy ◽  
Atomic Force ◽  
Organization Process ◽  
Ring Structures

AbstractWe present an experimental evidence of concentric ring pattern formation in a metal. They form during a single electro-explosion event in a needle-plate configuration. By measuring the dynamic progression of current during the explosion, we discuss evolution of these ring structures. Atomic force microscopy provides details of nanostructures that constitute these rings. From fluctuations in the plasma current recorded during the process, micro and nanostructure evolution is seen to be a self-organization process.

scholarly journals Simulating noncontact atomic force microscopy images

2019 ◽  
Vol 3 (11) ◽  
Author(s):  
James R. Chelikowsky ◽  
Dingxin Fan ◽  
Alex J. Lee ◽  
Yuki Sakai
Keyword(s):  
Atomic Force Microscopy ◽  
Force Microscopy ◽  
Atomic Force ◽  
Microscopy Images

scholarly journals Corrosion Behavior and Mechanical Properties of a Nanocomposite Superhydrophobic Coating

Coatings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 652
Author(s):  
Divine Sebastian ◽  
Chun-Wei Yao ◽  
Lutfun Nipa ◽  
Ian Lian ◽  
Gary Twu
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Atomic Force Microscopy ◽  
Nanocomposite Coating ◽  
Superhydrophobic Coating ◽  
Force Microscopy ◽  
Atomic Force ◽  
Microscopy Images ◽  
Scanning Electron

In this work, a mechanically durable anticorrosion superhydrophobic coating is developed using a nanocomposite coating solution composed of silica nanoparticles and epoxy resin. The nanocomposite coating developed was tested for its superhydrophobic behavior using goniometry; surface morphology using scanning electron microscopy and atomic force microscopy; elemental composition using energy dispersive X-ray spectroscopy; corrosion resistance using atomic force microscopy; and potentiodynamic polarization measurements. The nanocomposite coating possesses hierarchical micro/nanostructures, according to the scanning electron microscopy images, and the presence of such structures was further confirmed by the atomic force microscopy images. The developed nanocomposite coating was found to be highly superhydrophobic as well as corrosion resistant, according to the results from static contact angle measurement and potentiodynamic polarization measurement, respectively. The abrasion resistance and mechanical durability of the nanocomposite coating were studied by abrasion tests, and the mechanical properties such as reduced modulus and Berkovich hardness were evaluated with the aid of nanoindentation tests.

scholarly journals Influence of Growth Temperature of the Nucleation Layer on the Growth of InP on Si (001)

Coatings ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 823
Author(s):  
Shizheng Yang ◽  
Hongliang Lv ◽  
Likun Ai ◽  
Fangkun Tian ◽  
Silu Yan ◽  
...  
Keyword(s):  
Growth Temperature ◽  
Wafer Level ◽  
X Ray Diffraction ◽  
Nucleation Layer ◽  
Force Microscopy ◽  
Gas Source ◽  
Atomic Force ◽  
Growth Method ◽  
Step Growth ◽  
Microscopy Images

InP layers grown on Si (001) were achieved by the two-step growth method using gas source molecular beam epitaxy. The effects of growth temperature of nucleation layer on InP/Si epitaxial growth were investigated systematically. Cross-section morphology, surface morphology and crystal quality were characterized by scanning electron microscope images, atomic force microscopy images, high-resolution X-ray diffraction (XRD), rocking curves and reciprocal space maps. The InP/Si interface and surface became smoother and the XRD peak intensity was stronger with the nucleation layer grown at 350 °C. The Results show that the growth temperature of InP nucleation layer can significantly affect the growth process of InP film, and the optimal temperature of InP nucleation layer is required to realize a high-quality wafer-level InP layers on Si (001).

Nanocrystalline Solutions as Precursors to The Spray Deposition of Cdte Thin Films

1995 ◽  
Vol 382 ◽  
Author(s):  
Martin Pehnt ◽  
Douglas L. Schulz ◽  
Calvin J. Curtis ◽  
Helio R. Moutinho ◽  
Amy Swartzlander ◽  
...  
Keyword(s):  
Thin Films ◽  
Atomic Force Microscopy ◽  
Grain Size ◽  
X Ray Diffraction ◽  
X Ray ◽  
Force Microscopy ◽  
Cdte Nanoparticles ◽  
Atomic Force ◽  
Vis Spectroscopy ◽  
Cdte Thin Films

ABSTRACTIn this article we report the first nanoparticle-derived route to smooth, dense, phase-pure CdTe thin films. Capped CdTe nanoparticles were prepared by injection of a mixture of Cd(CH3)2, (n-C8H17)3 PTe and (n-C8H17)3P into (n-C8H17)3PO at elevated temperatures. The resultant nanoparticles 32-45 Å in diameter were characterized by x-ray diffraction, UV-Vis spectroscopy, transmission electron microscopy, thermogravimetric analysis and energy dispersive x-ray spectroscopy. CdTe thin film deposition was accomplished by dissolving CdTe nanoparticles in butanol and then spraying the solution onto SnO2-coated glass substrates at variable susceptor temperatures. Smooth and dense CdTe thin films were obtained using growth temperatures approximately 200 °C less than conventional spray pyrolysis approaches. CdTe films were characterized by x-ray diffraction, UV-Vis spectroscopy, atomic force microscopy, and Auger electron spectroscopy. An increase in crystallinity and average grain size as determined by x-ray diffraction was noted as growth temperature was increased from 240 to 300 °C. This temperature dependence of film grain size was further confirmed by atomic force microscopy with no remnant nanocrystalline morphological features detected. UV-Vis characterization of the CdTe thin films revealed a gradual decrease of the band gap (i.e., elimination of nanocrystalline CdTe phase) as the growth temperature was increased with bulk CdTe optical properties observed for films grown at 300 °C.

Characterization of X-ray irradiated graphene oxide coatings using X-ray diffraction, X-ray photoelectron spectroscopy, and atomic force microscopy

2013 ◽  
Vol 28 (2) ◽  
pp. 68-71 ◽  
Author(s):  
Thomas N. Blanton ◽  
Debasis Majumdar
Keyword(s):  
Atomic Force Microscopy ◽  
Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
High Energy ◽  
X Ray Diffraction ◽  
Carbon Phase ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Before And After

In an effort to study an alternative approach to make graphene from graphene oxide (GO), exposure of GO to high-energy X-ray radiation has been performed. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM) have been used to characterize GO before and after irradiation. Results indicate that GO exposed to high-energy radiation is converted to an amorphous carbon phase that is conductive.

Sign in / Sign up

Export Citation Format

Share Document