PHOTOLUMINESCENCE OF NANOCRYSTALLINE CdTe, INTRODUCED INTO POROUS SILICON

A method of colloidal synthesis of monodisperse nanocrystals (NC) with high stability, narrow bands of photoluminescence (PL) and high quantum yield has been developed. The process of colloidal synthesis took place at room temperature and for the passivation of NC used a variety of surfactants. The surface of NC CdTe was modified by introducing them into a matrix, organic or crystalline. In our case, the matrix was porous Silicon (PS), that is a composite structure was formed on the basis of the matrix and NC semiconductor. Nanocomposite structures of PS – NC CdTe were obtained by introducing colloidal solutions of NC CdTe into the solid matrix of PS and subsequent processing at a certain temperature regime. The photoluminescent properties of a composite system in which the matrix is microcrystalline PS and the second component is NC CdTe deposited from a colloidal solution of NC CdTe have been studied. The peculiarity of this system is that both components have PL of different intensities.The large difference in PL intensities and different positions of the radiation bands allowed, comparing the PL spectra of the colloidal solution of NC CdTe, PS and NC CdTe – PS at different stages of introduction of CdTe nanoparticles into the porous Silicon surface, to identify the interaction and mutual influence of the two constituent materials. The main disadvantages of the method are its relative novelty, which leads to the need for empirical selection of some parameters of the synthesis. The planned change of properties of PS and colloidal solutions of NC CdTe by variation of technological methods of synthesis and processing methods will allow to control the physical properties of this composite system and use it to develop new principles of design and creation of new generation sensor devices.

Synthesis of Cadmium Telluride Nanoparticles Using Thioglycolic Acid, Thioglycerol, and L-Cysteine

Cadmium telluride (CdTe) nanoparticles (NPs) are known for their unique physical and chemical properties. NP synthesis via a size-controlled procedure has become an intriguing research topic because NPs exhibit novel optical and physical properties depending on their size. Their sizes and properties can vary depending on the types and concentrations of stabilizers, which are bound to the surface of the NPs and protect the NPs from aggregation. In this study, we synthesized CdTe NPs stabilized by thioglycolic acid (TGA), 1-thioglycerol (TGC), and L-cysteine (L-C). The ratio of stabilizer to Cd2+ was 1:2.4. Transmission electron microscopy (TEM), X-ray diffraction (XRD), and photoluminescence (PL) were employed for characterization of the NPs. The average sizes of the synthesized NPs were 4.2, 4.1, and 3.7 nm for TGA, TGC, and L-C, respectively. The maximum fluorescent emission peaks of the three NP solutions were at 554.9, 551.6, and 538.3 nm for TGA, TGC, and L-C, respectively. The produced particles were crystalline in structure with a face-centered cubic (fcc) system.

Rapid and simultaneous detection of heart-type fatty acid binding protein and cardiac troponin using a lateral flow assay based on metal organic framework@CdTe nanoparticles

Herein, a zirconium metal organic framework (ZrMOF) based lateral flow assay (LFA) is described for the qualitative analysis of the early acute myocardial infarction (AMI) biomarkers include heart-type fatty acid...