scholarly journals The binary oxide NiO-CuO nanocomposite based thick film sensor for the acute detection of Hydrogen Sulphide gas vapours

2020 ◽  
Vol 17 (3) ◽  
pp. 260-269
Author(s):  
Umesh Jagannath Tupe1 ◽  
M. S. Zambare ◽  
Arun Vitthal Patil ◽  
Prashant Bhimrao Koli
Keyword(s):  
Copper Oxide ◽  
Nickel Oxide ◽  
Thick Film ◽  
Hydrogen Sulphide ◽  
Thick Films ◽  
Binary Oxide ◽  
Ex Situ ◽  
Nio Nanoparticles ◽  
Gas Concentration ◽  
Binary Sensor

The present research deals with the synthesis of copper oxide and nickel oxide nanoparticles. The nano powder of both NiO-CuO was utilized to fabricate the thick films.Thick films fabricated by screen printing method on glass substrate. The ex-situ doping method was followed for mixing the concentration of nickel oxide in copper oxide lattice. Calculated stoichiometric amount of NiO was loaded during thick film synthesis of CuO.The structure morphology of prepared CuO-NiO nanocomposite thick films was confirmed from x-ray diffraction technique, whichapproves cubic and crystalline CuO-NiO binary nanocomposite. The surface characteristics of the prepared films investigated byscanning electron microscopy that shows homogeneous, porous CuO-NiO nanoparticles with varying dimensions.The prepared thick films of CuO-NiO nanoparticles were analysed for electrical parameter, that assured the prepared material has a semiconducting nature. Further, these thick films promoted for gas sensing interpretation of H2S gas at various temperature and varied gas concentration. Here exclusive reports for hydrogen sulphide gas are reported. The binary CuO-NiO was thoroughly investigated for hydrogen sulphide gas concentration from 50 ppm to 500 ppm at the different temperature. The binary oxide sensor is found to be very sensitive at room temperature and maximum sensitivity response was 75.01 % for H2S gas. Furthermore the response and recovery times are also reported for binary sensor in the present research. The sensor reproducibility cycle was performed forbinary oxide sensor at hydrogen sulphide gas (H2S).

Exploring the characteristics of the nickel oxide nanoparticles via Sol - gel method

2020 ◽  
Vol 3 (3) ◽  
Author(s):  
Jothi M ◽  
Sowmiya K
Keyword(s):  
Nickel Oxide ◽  
Ph Value ◽  
Lattice Structure ◽  
Sol Gel ◽  
Systematic Change ◽  
Average Crystalline Size ◽  
Nio Nanoparticles ◽  
Nickel Oxide Nanoparticles ◽  
X Ray ◽  
Vis Spectroscopy

Nickel Oxide (NiO) is an important transition metal oxide with cubic lattice structure. NiO is thermally stable that is suitable for tremendous applications in the field of optic, ceramic,glass, electro-chromic coatings, plastics, textiles, nanowires, nanofibers, electronics,energy technology, bio-medicine, magnetism and so on. In this present study, NiO nanoparticles were successfully synthesized by sol-gel technique. Nano-sols were prepared by dissolving Nickel-Chloride [NiCl2.6H2O] in NaOH solvent and were converted into nano structured gel on precipitation. A systematic change in preparation parameters like calcination temperature, time, pH value has been noticed in order to predict the influence on crystallite size. Then the prepared samples were characterized by the X-ray Diffraction Spectroscopic (XRD), UV-VIS Spectroscopy, Fourier Transform Infra-Red Spectroscopy (FTIR), Energy Dispersive X-ray Spectroscopy (EDX), Scanning Electron Microscopy (SEM) and Particle Size Analyzer (PSA). From XRD, the average crystalline-size has been calculated by Debye-Scherrer Equation and it was found to be 12.17 nm and the band gap energy of Nickel oxide (NiO) from UV studies reveals around 3.85 eV. Further, EDX and FTIR studies, confirm the presences of NiO nanoparticles. The SEM study exhibits the spherical like morphology of Nickel oxide (NiO). Further from PSA, the mean value of NiO nanoparticles has been determined.

scholarly journals Phytosynthetic Fabrication of Lanthanum Ion-Doped Nickel Oxide Nanoparticles Using Sesbania grandiflora Leaf Extract and Their Anti-Microbial Properties

Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 124
Author(s):  
Srihasam Saiganesh ◽  
Thyagarajan Krishnan ◽  
Golla Narasimha ◽  
Hesham S. Almoallim ◽  
Sulaiman Ali Alhari ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Optical Properties ◽  
Rare Earth ◽  
Nickel Oxide ◽  
Photoelectron Spectroscopy ◽  
Metal Oxide Nanoparticles ◽  
Oxide Nanoparticles ◽  
Nio Nanoparticles ◽  
X Ray ◽  
Sesbania Grandiflora

Over the past few years, the photogenic fabrication of metal oxide nanoparticles has attracted considerable attention, owing to the simple, eco-friendly, and non-toxic procedure. Herein, we fabricated NiO nanoparticles and altered their optical properties by doping with a rare earth element (lanthanum) using Sesbania grandiflora broth for antibacterial applications. The doping of lanthanum with NiO was systematically studied. The optical properties of the prepared nanomaterials were investigated through UV-Vis diffuse reflectance spectra (UV-DRS) analysis, and their structures were studied using X-ray diffraction analysis. The morphological features of the prepared nanomaterials were examined by scanning electron microscopy and transmission electron microscopy, their elemental structure was analyzed by energy-dispersive X-ray spectral analysis, and their oxidation states were analyzed by X-ray photoelectron spectroscopy. Furthermore, the antibacterial action of NiO and La-doped NiO nanoparticles was studied by the zone of inhibition method for Gram-negative and Gram-positive bacterial strains such as Escherichia coli and Bacillus sublitis. It was evident from the obtained results that the optimized compound NiOLa-04 performed better than the other prepared compounds. To the best of our knowledge, this is the first report on the phytosynthetic fabrication of rare-earth ion Lanthanum (La3+)-doped Nickel Oxide (NiO) nanoparticles and their anti-microbial studies.

scholarly journals Piezoelectric Thick Film Deposition via Powder/Granule Spray in Vacuum: A Review

Actuators ◽  
2020 ◽  
Vol 9 (3) ◽  
pp. 59
Author(s):  
Deepak Rajaram Patil ◽  
Venkateswarlu Annapureddy ◽  
J. Kaarthik ◽  
Atul Thakre ◽  
Jun Akedo ◽  
...  
Keyword(s):  
Thick Film ◽  
Thick Films ◽  
Cost Effective ◽  
Aerosol Deposition ◽  
Ceramic Coatings ◽  
Film Deposition ◽  
Energy Harvesters ◽  
Ceramic Films ◽  
Dense Ceramic ◽  
Processing Techniques

Conventional thin-film processing techniques remain inadequate for obtaining superior dense ceramic thick films. The incompatibility of ceramic films prepared via other methods, such as screen printing, spin coating, and sputtering, is a major obstacle in the fabrication of thick film-based ceramic electronic components. The granule spray in vacuum (GSV) processes and aerosol deposition (AD) are important coating approaches for forming dense ceramic thick films featuring nanoscale crystallite structures at room temperature, which offer excellent material properties and facilitate cost-effective production. AD ceramic coatings require the acceleration of solid-state submicron ceramic particles via gas streams with a velocity of a few hundred meters per second, which are then wedged onto a substrate. This process is economical and particularly useful for the fabrication of piezoelectric thick film-based microactuators, energy harvesters, sensors, and optoelectronic devices. More recently, the GSV technique was improved to achieve more uniform and homogeneous film deposition after AD. This review article presents a detailed overview of the AD and GSV processes for piezoelectric thick films in terms of recent scientific and technological applications.

scholarly journals Examination of Thick-Films Using Modern Surface Analytical Techniques

1984 ◽  
Vol 11 (3) ◽  
pp. 219-223 ◽  
Author(s):  
G. Harsányi ◽  
G. Ripka
Keyword(s):  
Integrated Circuits ◽  
Thick Film ◽  
Analytical Methods ◽  
Thick Films ◽  
Analytical Techniques ◽  
Electrical Measurements ◽  
Surface Impurity ◽  
And Migration

Modern surface analytical methods/EMPA, AES, SIMS etc. were used for studying the different layers in thick-film integrated circuits. Diffusion and migration effects, surface impurity distributions and surface compositions were examined. Some of the results are presented in this paper. Electrical measurements are not discussed here; only examples of the practical use of the methods are demonstrated.

scholarly journals MICROWAVE ASSISTED SYNTHESIS AND STRUCTURAL CHARACTERIZATION OF NICKEL OXIDE NANOPARTICLES

2016 ◽  
Vol 3 (1) ◽  
pp. 12-14
Author(s):  
Kalpanadevi K ◽  
Manimekalai R
Keyword(s):  
Electron Microscope ◽  
Nickel Oxide ◽  
Structural Characterization ◽  
Nano Particles ◽  
Microwave Assisted Synthesis ◽  
Nio Nanoparticles ◽  
Nickel Oxide Nanoparticles ◽  
Transmission Electron ◽  
Good Crystallinity

Nickel oxide (NiO) nano-particles were produced via a simple microwave method from the Ni(OH)2 precursor, which was obtained by slow drop-wise addition of 0.1M sodium hydroxide to 0.1M nickel nitrate. The mixture was vigorously stirred until the pH reached 7.2. The mixture was then irradiated with microwave to deposit Ni(OH)2 at a better precipitation rate. Drying the precipitate at 320°C resulted in formation of NiO nanoparticles. High Resolution Transmission Electron Microscope (HRTEM), Scanning Electron Microscope (SEM) and X-ray diffraction (XRD), employed for the structural characterization of the as-prepared NiO nanoparticles, revealed their good crystallinity and high-purity. Microwave irradiation increased homogeneity and decreased the mean particle size of the produced NiO particles.

Structural and Optical Properties of Pure NiO Nanoparticles and NiO-Mn2O3, NiO-CdO, NiO-Pb2O3, NiO-ZnO Nanocomposites

2021 ◽  
Vol 14 (5) ◽  
pp. 409-417
Keyword(s):  
Nickel Oxide ◽  
Green Emission ◽  
Hexagonal Structure ◽  
Precipitation Method ◽  
Nio Nanoparticles ◽  
Structural And Optical Properties ◽  
Suitable Material ◽  
Structure Morphology ◽  
Average Grain Size ◽  
Co Precipitation

Abstract: Pure nickel oxide (NiO) nanoparticles and NiO-Mn2O3, NiO-CdO, NiO-Pb2O3, NiO –ZnO nanocomposites were synthesized by co-precipitation method. The PXRD studies revealed that NiO, Mn2O3 and CdO possessed cubic structure, Pb2O3 possessed monoclinic structure, ZnO possessed hexagonal structure and confirmed the presence of polycrystallinity nature of NiO and Mn2O3, CdO, Pb2O3, ZnO in the nanocomposites. The average grain size of NiO nanoparticles was found to be 30.10 nm using Debye Scherer’s formula. The FESEM images of NiO nanoparticles and their nanocomposites revealed spherical shaped structure and NiO-Pb2O3 revealed needle shaped rod-like structure. EDAX analysis confirmed the composition of NiO nanoparticles and their nanocomposites. Raman spectra exhibited characteristic peaks of pure NiO and that of NiO- Mn2O3, NiO-CdO, NiO- Pb2O3, NiO-ZnO in the synthesized nanocomposites. In the PL spectra, blue and green emission was observed in the samples. UV-vis spectra revealed the absorption peaks of NiO nanoparticles and their nanocomposites. Thus, the synthesized NiO- Mn2O3, NiO-CdO, NiO - Pb2O3 and NiO-ZnO nanocomposites can be a suitable material for electrocatalysis applications. Keywords: Nickel oxide nanocomposites, Structure, Morphology, Absorption, Luminescence.

Sign in / Sign up

Export Citation Format

Share Document