scholarly journals Dynamical Model for an Interharmonic Property of a Piezoelectric Bimorph Cantilever Beam with Self-Sensing Function

2016 ◽  
Vol 2016 ◽  
pp. 1-9
Author(s):  
Ting Zhang ◽  
Ying Pan ◽  
Lijie Cao
Keyword(s):  
Output Voltage ◽  
Low Frequency ◽  
Coupling Theory ◽  
Nonlinear Characteristic ◽  
Sinusoidal Voltage ◽  
Piezoelectric Bimorph ◽  
Harmonic Frequency ◽  
Resonance Response ◽  
Cantilevered Beam ◽  
Bimorph Beam

A piezoelectric bimorph cantilevered beam is analyzed dynamically by a longitudinal and transverse coupling theory. When a sinusoidal voltage is applied on the actuating layer of the bimorph, the output voltage of the sensing layer appears as interharmonic component signal. The interharmonic frequency is noninteger harmonic frequency of the applied voltage. A dynamic model is proposed to describe the interharmonic property of the piezoelectric bimorph beam. Through some simulations and experiments, the theoretical model is verified effectively to express the nonlinear characteristic. Furthermore, when the piezoelectric bimorph resonance happens, some interharmonic response at low frequency will modulate with the resonance response.

Liquid encapsulated electrostatic energy harvester for low-frequency vibrations

2012 ◽  
Vol 24 (1) ◽  
pp. 61-69 ◽  
Author(s):  
Ling Bu ◽  
Xiaoming Wu ◽  
Xiaohong Wang ◽  
Litian Liu
Keyword(s):  
Polyvinylidene Fluoride ◽  
Output Voltage ◽  
Energy Harvester ◽  
Low Frequency ◽  
Electrostatic Energy ◽  
Maximum Output ◽  
Flowing Liquid ◽  
Horizontal Vibration ◽  
Low Viscosity ◽  
High Relative Permittivity

This article presents the modeling, fabrication, and testing of liquid encapsulated energy harvester using polyvinylidene fluoride electrets. Unlike harvesters reported in previous literature, this liquid encapsulated energy harvester uses flowing liquid rather than conventional resonating structures to induce variable capacitance and is more suitable for low-frequency applications. Prototypes injected with three types of liquid ( N-methyl-2-pyrrolidone, N, N-dimethylformamide, and glycerin) are tested in horizontal vibration and rotary motion mode, respectively. The results show that N, N-dimethylformamide–injected prototypes display the most desirable performance in horizontal vibration testing at 1–10 Hz due to high relative permittivity and low viscosity, with maximum output voltage of 2.32 V and power of 0.18 µW at 10 Hz. Glycerin-injected prototypes perform best at 0.1–1 Hz rotation due to effective movement and highest permittivity, with maximum output voltage of 11.46 V and power of 2.19 µW at 1 Hz.

A Low Frequency Sinusoidal Voltage Source

1950 ◽  
Vol 21 (4) ◽  
pp. 302-303
Author(s):  
Louis A. Rosenthal
Keyword(s):  
Low Frequency ◽  
Voltage Source ◽  
Sinusoidal Voltage

Broadband Rotational Energy Harvesting Using Micro Energy Harvester

2018 ◽  
Author(s):  
Jui-Ta Chien ◽  
Yung-Hsing Fu ◽  
Chao-Ting Chen ◽  
Shun-Chiu Lin ◽  
Yi-Chung Shu ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Output Voltage ◽  
Energy Harvester ◽  
Low Frequency ◽  
Rotational Energy ◽  
Open Circuit ◽  
Maximum Output ◽  
Rotational Excitation ◽  
Rotating Speed ◽  
Piezoelectric Energy

This paper proposes a broadband rotational energy harvesting setup by using micro piezoelectric energy harvester (PEH). When driven in different rotating speed, the PEH can output relatively high power which exhibits the phenomenon of frequency up-conversion transforming the low frequency of rotation into the high frequency of resonant vibration. It aims to power self-powered devices used in the applications, like smart tires, smart bearings, and health monitoring sensors on rotational machines. Through the excitation of the rotary magnetic repulsion, the cantilever beam presents periodically damped oscillation. Under the rotational excitation, the maximum output voltage and power of PEH with optimal impedance is 28.2 Vpp and 663 μW, respectively. The output performance of the same energy harvester driven in ordinary vibrational based excitation is compared with rotational oscillation under open circuit condition. The maximum output voltage under 2.5g acceleration level of vibration is 27.54 Vpp while the peak output voltage of 36.5 Vpp in rotational excitation (in 265 rpm).

Dynamics in a Nonfragile Glass-Forming Liquid

1996 ◽  
Vol 455 ◽  
Author(s):  
B. Rufflé ◽  
S. Beaufils ◽  
J. Etrillard ◽  
J. Gallier ◽  
B. Toudic ◽  
...  
Keyword(s):  
Structural Relaxation ◽  
Mode Coupling ◽  
Low Frequency ◽  
Large Temperature ◽  
Coupling Theory ◽  
Mode Coupling Theory ◽  
Glass Forming ◽  
Real Change ◽  
Wide Energy ◽  
Fragile Glass

ABSTRACTThe dynamics of Na0.5Li0.5PO3 (Tg = 515 K, Tm = 749 K) a non fragile glass forming liquid has been investigated over a large temperature range (300 − 1000 K.) and in a wide energy window using various experimental techniques. The susceptibility spectra obtained by coherent neutron scattering and depolarized light scattering between 1 and 104 GHz show mainly two contributions: a low frequency vibrational peak, the so-called Boson peak and a quasielastic component, referred to the βfast process in the mode coupling theory (MCT).The data are discussed in relation to the mode coupling theory for the liquid glass transition. In particular, the temperature evolution of the susceptibility height in the βfast region is compatible with a crossover temperature Tc ∼ 620 K which is also deduced from a power law temperature dependence of the structural relaxation timescale. As a secondary βslow process, observed by 31P NMR, decouples from the structural relaxation timescale also below 600 K, a real change in the dynamics seems to occur around Tc ∼ 620 K = 1.2 Tg in this non fragile glass Conning liquid.

Performance Evaluation of Numerical Finite Element Coupled Algorithms for Structure–Electric Interaction Analysis of MEMS Piezoelectric Actuator

2019 ◽  
Vol 16 (07) ◽  
pp. 1850106 ◽  
Author(s):  
Prakasha Chigahalli Ramegowda ◽  
Daisuke Ishihara ◽  
Tomoya Niho ◽  
Tomoyoshi Horie
Keyword(s):  
Finite Element ◽  
Piezoelectric Actuator ◽  
3D Structure ◽  
Time Integration ◽  
Low Frequency ◽  
Piezoelectric Actuators ◽  
Piezoelectric Bimorph ◽  
Iterative Coupling ◽  
Electric Interaction ◽  
Numerical Finite Element

This work presents multiphysics numerical analysis of piezoelectric actuators realized using the finite element method (FEM) and their performances to analyze the structure-electric interaction in three-dimensional (3D) piezoelectric continua. Here, we choose the piezoelectric bimorph actuator without the metal shim and with the metal shim as low-frequency problems and a surface acoustic wave device as a high-frequency problem. More attention is given to low-frequency problems because in our application micro air vehicle’s wings are actuated by piezoelectric bimorph actuators at low frequency. We employed the Newmark’s time integration and the central difference time integration to study the dynamic response of piezoelectric actuators. Monolithic coupling, noniterative partitioned coupling and partitioned iterative coupling schemes are presented. In partitioned iterative coupling schemes, the block Jacobi and the block Gauss–Seidel methods are employed. Resonance characteristics are very important in micro-electro-mechanical system (MEMS) applications. Therefore, using our proposed coupled algorithms, the resonance characteristics of bimorph actuator is analyzed. Comparison of the accuracy and computational efficiency of the proposed numerical finite element coupled algorithms have been carried out for 3D structure–electric interaction problems of a piezoelectric actuator. The numerical results obtained by the proposed algorithms are in good agreement with the theoretical solutions.

scholarly journals A Two-Degree-of-Freedom Cantilever-Based Vibration Triboelectric Nanogenerator for Low-Frequency and Broadband Operation

Electronics ◽  
2019 ◽  
Vol 8 (12) ◽  
pp. 1526 ◽  
Author(s):  
Gang Tang ◽  
Fang Cheng ◽  
Xin Hu ◽  
Bo Huang ◽  
Bin Xu ◽  
...  
Keyword(s):  
Output Voltage ◽  
Low Frequency ◽  
Degree Of Freedom ◽  
Triboelectric Nanogenerator ◽  
Energy Harvesters ◽  
Harvesting Technique ◽  
Wide Range ◽  
Operating Bandwidth ◽  
Self Powered ◽  
Two Degree Of Freedom

With the continual increasing application requirements of broadband vibration energy harvesters (VEHs), many attempts have been made to broaden the bandwidth. As compared to adopted only a single approach, integration of multi-approaches can further widen the operating bandwidth. Here, a novel two-degree-of-freedom cantilever-based vibration triboelectric nanogenerator is proposed to obtain high operating bandwidth by integrating multimodal harvesting technique and inherent nonlinearity broadening behavior due to vibration contact between triboelectric surfaces. A wide operating bandwidth of 32.9 Hz is observed even at a low acceleration of 0.6 g. Meanwhile, the peak output voltage is 18.8 V at the primary resonant frequency of 23 Hz and 1 g, while the output voltage is 14.9 V at the secondary frequency of 75 Hz and 2.5 g. Under the frequencies of these two modes at 1 g, maximum peak power of 43.08 μW and 12.5 μW are achieved, respectively. Additionally, the fabricated device shows good stability, reaching and maintaining its voltage at 8 V when tested on a vacuum compression pump. The experimental results demonstrate the device has the ability to harvest energy from a wide range of low-frequency (<100 Hz) vibrations and has broad application prospects in self-powered electronic devices and systems.

A New Advanced Topology of Stacked Multicell Inverter

2014 ◽  
Vol 15 (4) ◽  
pp. 327-333 ◽  
Author(s):  
Mohamad R. Banaei ◽  
M. R. Jannati Oskuee ◽  
F. Mohajel Kazemi
Keyword(s):  
Frequency Spectrum ◽  
Output Voltage ◽  
Low Frequency ◽  
Experimental Results ◽  
The Novel ◽  
Stored Energy ◽  
Well Performance ◽  
Flying Capacitors ◽  
Voltage Frequency ◽  
Simulation Results

Abstract In this paper, a new advanced topology of stacked multicell inverter is proposed which is generally suitable for high number of steps associated with a low number of switches. Compared with traditional flying capacitor multicell and stacked multicell (SM) inverters, doubling the number of output voltage levels and the RMS value, ameliorating the output voltage frequency spectrum, decreasing the number and rating of components, stored energy and rating of flying capacitors are available with the proposed inverter. These improvements are achieved by adding only four low-frequency switches to the traditional SM inverter’s structure. The suggested topology is simulated using MATLAB/SIMULINK software, and simulation results are presented to indicate well-performance of the novel converter. In addition, the experimental results of proposed topology prototype have been presented to validate its practicability.

A Miniature Energy Harvesting Device Using Martensite Variant Reorientation

2013 ◽  
Vol 738-739 ◽  
pp. 411-415 ◽  
Author(s):  
Manfred Kohl ◽  
Rui Zhi Yin ◽  
Viktor Pinneker ◽  
Yossi Ezer ◽  
Alexei Sozinov
Keyword(s):  
Magnetic Field ◽  
Energy Harvesting ◽  
Magnetic Flux ◽  
Output Voltage ◽  
Permanent Magnets ◽  
Magnetic Circuit ◽  
Compressive Loading ◽  
Piezoelectric Bimorph ◽  
Martensite Variant ◽  
Cyclic Motion

This paper presents a miniature energy harvesting device that makes use of stress-induced cyclic martensite variant reorientation in a Ni-Mn-Ga single crystal of 0.3x2x2 mm³ size. The stress- and magnetic field-induced reorientation is investigated for single crystalline Ni50.2Mn28.4Ga21.4 specimens of 0.3 mm thickness that are cut along the (100) direction and subjected to uniaxial compressive loading. A demonstrator is presented consisting of a FSMA specimen placed in the gap of a magnetic circuit to guide and enhance the field of biasing permanent magnets. The cyclic motion of a piezoelectric bimorph actuator is used to mechanically load the FSMA specimen. The corresponding change of magnetic flux induces an electrical voltage in a pick-up coil (N=2000 turns). The effects of biasing magnetic field, strain amplitude and strain velocity are investigated. An optimum magnetic field of 0.4 T exists, where the output voltage reaches 120 mV at a strain velocity of 0.006 ms-1.

scholarly journals Implementation of 5-Level H-Bridge Inverter with Multicarrier based Modulation Techniques

2020 ◽  
Vol 8 (5) ◽  
pp. 5180-5185
Keyword(s):  
Pulse Width ◽  
Output Voltage ◽  
Pulse Width Modulation ◽  
Reference Signal ◽  
Low Frequency ◽  
Harmonic Spectrum ◽  
Multilevel Inverter ◽  
Modulation Method ◽  
Dc Voltage ◽  
Modulation Technique

Paper Setup must be in A4 size with Margin: Top In the present paper multi carrier sinusoidal modulation technique which is an efficient method of producing control signals is used for a symmetrical inverter with several levels in cascade H Bridge is discussed. The Cascaded H-Bridge performance output levels depend on the DC voltage sources used at the input side. With the help of two DC voltage sources, five level output can be obtained whereas three sources gives levels of seven in output voltage. In this paper, multi-carrier SPWM switching is obtained for switching of multilevel inverter based switches. Two signals are used in this switching method, among which one of the signals is reference which is a low frequency sinusoidal signal and the one is a carrier signal. In case of sinusoidal PWM method of modulation technique, the reference signal is a sinusoidal one and triangular signal can be used as a carrier signal. These types of inverters have the ability to generate inverted output voltage with an efficient harmonic spectrum and reliable output results. This document provides switching signal for H-bridge inverter structure which can improve harmonic performance. The 5-level multilevel inverter is simulated for traditional carrier-based pulse-width modulation (PWM) phase change carrier techniques. The total harmonic performance of the output voltages is analyzed for the two PWM control methods. The performance of the symmetrical PWM CHB is simulated using MATLAB-SIMULINK model. Model results show that THD can be minimized to a limit with level shifted modulation method of the sinusoidal pulse width. The results from the simulations show that the quality of the waveform of the output voltage improves with less loss and with a lower THD.

Sign in / Sign up

Export Citation Format

Share Document