Nonlinear Thermally Buckled Piezoelectric Energy Harvester

A thermally buckled piezoelectric energy harvester is designed to power biomedical devices inside the body. The energy harvester (EN) uses the vibrations inside the body to generate the electricity needed for powering biomedical sensors and devices. The piezoelectric beam consists of a brass substrate and two piezoelectric patches attached to the top and the bottom of the substrate. The bimorph beam is inside a rigid frame. The bimorph beam is buckled due to the difference in the coefficient of the thermal expansion of the beam and the frame. Inside the body, most of the energy content come from the low-frequency vibrations (less than 50 Hz). Having high natural frequency is a major problem in Microelectromechanical systems (MEMS) energy harvesters. Considering the small size of the EN, 1 cm3, the natural frequency is expected to be high. In our design, the natural frequency is lowered significantly by using a buckled beam. A mass is also used in the middle of the beam to decrease the natural frequency even more. Since the beam is buckled, the design is bistable and nonlinear which increases the output power. In this paper, the natural frequencies and mode shapes of the EN are analytically derived. The geometric nonlinearities are included in the electromechanical coupled governing equations. The governing equations are solved and it is shown that the device generates sufficient electricity to power biomedical sensors and devices inside the human body.

Power Generation From Mastication Forces Using a Smart Tooth

The batteries of the current pacing devices are relatively large and occupy over 60 percent of the size of pulse generators. Therefore, they cannot be placed in the subtle areas of human body. In this paper, the mastication force and the resulting tooth pressure are converted to electricity. The pressure energy can be converted to electricity by using the piezoelectric effect. The tooth crown is used as a power autonomous pulse generator. We refer to this envisioned pulse generator as the smart tooth. The smart tooth is in the form of a dental implant. A piezoelectric vibration energy harvester is designed and modeled for this purpose. The Piezoelectric based energy harvesters investigated and analyzed in this paper initially includes a single degree of freedom piezoelectric based stack energy harvester which utilizes a harvesting circuit employing the case of a purely resistive circuit. The next step is utilizing and investigating a bimorph piezoelectric beam which is integrated/embedded in the smart tooth implant. Mastication process causes the bimorph beam to buckle or return to unbuckled condition. The transitions result in vibration of the piezoelectric beam and thus generate energy. The power estimated by the two mechanisms is in the order of hundreds of microwatts. Both scenarios of the energy harvesters are analytically modeled. The exact analytical solution of the piezoelectric beam energy harvester with Euler-Bernoulli beam assumptions is presented. The electro-mechanical coupling and the geometric nonlinearities have been included in the model for the piezoelectric beam.

Dynamical Model for an Interharmonic Property of a Piezoelectric Bimorph Cantilever Beam with Self-Sensing Function

A piezoelectric bimorph cantilevered beam is analyzed dynamically by a longitudinal and transverse coupling theory. When a sinusoidal voltage is applied on the actuating layer of the bimorph, the output voltage of the sensing layer appears as interharmonic component signal. The interharmonic frequency is noninteger harmonic frequency of the applied voltage. A dynamic model is proposed to describe the interharmonic property of the piezoelectric bimorph beam. Through some simulations and experiments, the theoretical model is verified effectively to express the nonlinear characteristic. Furthermore, when the piezoelectric bimorph resonance happens, some interharmonic response at low frequency will modulate with the resonance response.

Active Artificial Hair Cells Using Nonlinear Feedback Control

There is interest in developing devices that mimic the sound transduction of the cochlear hair cells. Current artificial hair cell (AHC) designs have focused on passive transduction of sound into electrical signals. However, measurements inside living cochleae have revealed that a nonlinear amplification is at work in mammalian hearing. This amplification lowers the threshold for sound detection allowing mammals to hear faint sounds. The nonlinearity results in an amplitude compression whereby a large range of sound pressure levels produces a smaller range of displacements. This compressive nonlinearity gives the ear a large dynamic range. This work seeks to develop and analyze active artificial hair cells which employ a bio-inspired amplification to improve performance. This paper examines two artificial hair cell designs. The first is an 18.5 in long aluminum cantilever beam which is excited and controlled using piezoelectric actuators along the length of the beam. The second design is a one inch piezoelectric bimorph beam subject to a base excitation. In both cases a nonlinear feedback control law is implemented which reduces the beam’s linear viscous damping and introduces a cubic damping term. Model and experimental results show the control law amplified the response of the artificial hair cell to low excitation levels near the resonance frequency. Increasing input levels produced a compressive nonlinearity at resonance similar to that observed in measurements from mammalian cochleae. This work could lead to the development of new bio-inspired sensors with a lower threshold of detection, improved frequency sensitivity, and larger dynamic range.