scholarly journals RSM Based Optimization of Chemical and Enzymatic Transesterification of Palm Oil: Biodiesel Production and Assessment of Exhaust Emission Levels

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
Muhammad Waseem Mumtaz ◽  
Hamid Mukhtar ◽  
Farooq Anwar ◽  
Nazamid Saari
Keyword(s):  
Palm Oil ◽  
Fatty Acid Methyl Esters ◽  
Methyl Esters ◽  
Biodiesel Production ◽  
Exhaust Emission ◽  
Biodiesel Blends ◽  
Enzymatic Transesterification ◽  
Novozyme 435 ◽  
Emission Behavior ◽  
Palm Oil Biodiesel

Current study presents RSM based optimized production of biodiesel from palm oil using chemical and enzymatic transesterification. The emission behavior of biodiesel and its blends, namely, POB-5, POB-20, POB-40, POB-50, POB-80, and POB-100 was examined using diesel engine (equipped with tube well). Optimized palm oil fatty acid methyl esters (POFAMEs) yields were depicted to be47.6±1.5, 92.7±2.5, and95.4±2.0% for chemical transesterification catalyzed by NaOH, KOH, and NaOCH3, respectively, whereas for enzymatic transesterification reactions catalyzed by NOVOZYME-435 and A. n. lipase optimized biodiesel yields were94.2±3.1and62.8±2.4%, respectively. Distinct decrease in particulate matter (PM) and carbon monoxide (CO) levels was experienced in exhaust emissions from engine operating on biodiesel blends POB-5, POB-20, POB-40, POB-50, POB-80, and POB-100 comparative to conventional petroleum diesel. Percentage change in CO and PM emissions for different biodiesel blends ranged from −2.1 to −68.7% and −6.2 to −58.4%, respectively, relative to conventional diesel, whereas an irregular trend was observed for NOx emissions. Only POB-5 and POB-20 showed notable reductions, whereas all other blends (POB-40 to POB-100) showed slight increase in NOx emission levels from 2.6 to 5.5% comparative to petroleum diesel.

Impact of Using Biodiesels of Different Origin and Additives on the Performance of a Stationary Diesel Engine

2000 ◽  
Vol 122 (4) ◽  
pp. 624-631 ◽  
Author(s):  
A. Serdari ◽  
K. Fragioudakis ◽  
S. Kalligeros ◽  
S. Stournas ◽  
E. Lois
Keyword(s):  
Diesel Engine ◽  
Fatty Acid Methyl Esters ◽  
Corn Oil ◽  
Methyl Esters ◽  
Raw Material ◽  
Biodiesel Production ◽  
Exhaust Emission ◽  
Fuel Blends ◽  
Different Types ◽  
Particulate Matter Emissions

With the exception of rape seed oil which is the principal raw material for biodiesel Fatty Acid Methyl Esters, (FAME) production, sunflower oil, corn oil, and olive oil, which are abundant in Southern Europe, along with some wastes, such as used frying oils, appear to be attractive candidates for biodiesel production. In this paper fuel consumption and exhaust emission measurements from a single cylinder, stationary diesel engine are described. The engine was fueled with fuel blends containing four different types of biodiesel, at proportions up to 100 percent; the further impact of the usage of two specific additives was also investigated. The four types of biodiesel appeared to have equal performance and irrespective of the raw material used for their production, their addition to the traditional diesel fuel improved the particulate matter emissions. The results improve further when specific additive combinations are used. [S0742-4795(00)00604-9]

scholarly journals Influences of Water Content in Feedstock Oil on Burning Characteristics of Fatty Acid Methyl Esters

Processes ◽  
2020 ◽  
Vol 8 (9) ◽  
pp. 1130
Author(s):  
Cherng-Yuan Lin ◽  
Lei Ma
Keyword(s):  
Fatty Acids ◽  
Fatty Acid ◽  
Water Content ◽  
Palm Oil ◽  
Conversion Rate ◽  
Fatty Acid Methyl Esters ◽  
Methyl Esters ◽  
Acid Methyl ◽  
Added Water ◽  
Palm Oil Biodiesel

Strong alkaline-catalyst transesterification with short-chain alcohol is generally used for biodiesel production due to its dominant advantages of shorter reaction time and higher conversion rate over other reactions. The existence of excess water content in the feedstock oil might retard the transesterification rate and in turn deteriorate the fuel characteristics of the fatty acid methyl esters. Hence, optimum water content in the raw oil, aimed towards both lower production cost and superior fuel properties, becomes significant for biodiesel research and industrial practices. Previous studies only concerned the influences of water contents on the yield or conversion rate of fatty acid methyl esters through transesterification of triglycerides. The effects of added water in the reactant mixture on burning characteristics of fatty acid methyl esters are thus first investigated in this study. Raw palm oil was added with preset water content before being transesterified. The experimental results show that the biodiesel produced from the raw palm oil containing a 0.05 wt.% added water content had the highest content of saturated fatty acids and total fatty acid methyl esters (FAME), while that containing 0.11 wt.% water content had the lowest content of total FAME and fatty acids of longer carbon chains than C16 among the biodiesel products. Regarding burning characteristics, palm-oil biodiesel made from raw oil with a 0.05 wt.% added water content among those biodiesels was found to have the highest distillation temperatures, flash point, and ignition point, which implies higher safety extents during handling and storage of the fuel. The added water content 0.05 wt.% in raw oil was considered the optimum to produce palm-oil biodiesel with superior fuel structure of fatty acids and burning characteristics. Higher or lower water content than 0.05 wt.% would cause slower nucleophilic substitution reaction and thus a lower conversion rate from raw oil and deteriorated burning characteristics in turn.

Treatment of acidic palm oil for fatty acid methyl esters production

2012 ◽  
Vol 66 (1) ◽  
Author(s):  
Adeeb Hayyan ◽  
Farouq Mjalli ◽  
Mohamed Mirghani ◽  
Mohd Hashim ◽  
Maan Hayyan ◽  
...  
Keyword(s):  
Palm Oil ◽  
Fatty Acid Methyl Esters ◽  
Methyl Esters ◽  
Acid Value ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Esterification Reaction ◽  
Reaction Conditions ◽  
Acid Methyl ◽  
Stage Process

AbstractAcidic crude palm oil (ACPO) produced from palm oil mills with an acid value of 18 mg g−1 was considered to be a possible feedstock for biodiesel production. Due to its high acidity, conventional transesterification cannot be applied directly for biodiesel production. Methane sulphonic acid (MSA, CH3SO3H) is used to reduce the acidity prior to the alkaline transesterification reaction. The laboratory-scale experiments involved an MSA to ACPO dosage of 0.25–3.5 %, a molar ratio (methanol to ACPO) from 4: 1 to 20: 1, reaction temperature of 40–80°C, reaction time of 3–150 min, and stirrer speed of 100–500 min−1. The optimum esterification reaction conditions were 1 % of catalyst to ACPO, with a molar ratio of methanol to ACPO of 8: 1, a stirring speed of 300 min−1, for 30 min and at 60°C. Under these conditions, the FFA content was reduced from 18 mg g−1 to less than 1 mg g−1 and with a yield of 96 %. The biodiesel produced met the EN14214 standard specifications. MSA was recycled for three times without losing its activity. The biodiesel produced in a two-stage process has a low acid value (0.14 mg g−1).

scholarly journals Enzymatic Transesterification of Waste Frying Oil from Local Restaurants in East Colombia Using a Combined Lipase System

2020 ◽  
Vol 10 (10) ◽  
pp. 3566
Author(s):  
Mary Angélica Ferreira Vela ◽  
Juan C. Acevedo-Páez ◽  
Nestor Urbina-Suárez ◽  
Yeily Adriana Rangel Basto ◽  
Ángel Darío González-Delgado
Keyword(s):  
Reaction Time ◽  
Methyl Esters ◽  
Enzyme Concentration ◽  
Operating Conditions ◽  
Frying Oil ◽  
Biodiesel Production ◽  
Optimum Operating ◽  
Waste Frying Oil ◽  
Production Chain ◽  
Enzymatic Transesterification

The search for innovation and biotechnological strategies in the biodiesel production chain have become a topic of interest for scientific community owing the importance of renewable energy sources. This work aimed to implement an enzymatic transesterification process to obtain biodiesel from waste frying oil (WFO). The transesterification was performed by varying reaction times (8 h, 12 h and 16 h), enzyme concentrations of lipase XX 25 split (14%, 16% and 18%), pH of reaction media (6, 7 and 8) and reaction temperature (35, 38 and 40 °C) with a fixed alcohol–oil molar ratio of 3:1. The optimum operating conditions were selected to quantify the amount of fatty acid methyl esters (FAMEs) generated. The highest biodiesel production was reached with an enzyme concentration of 14%, reaction time of 8 h, pH of 7 and temperature of 38 °C. It was estimated a FAMEs production of 42.86% for the selected experiment; however, best physicochemical characteristics of biodiesel were achieved with an enzyme concentration of 16% and reaction time of 8 h. Results suggested that enzymatic transesterification process was favorable because the amount of methyl esters obtained was similar to the content of fatty acids in the WFO.

scholarly journals Deep Eutectic Solvents Based Choline Chloride for Enzymatic Biodiesel Production from Degumming Palm Oil

2020 ◽  
Vol 32 (4) ◽  
pp. 733-738 ◽  
Author(s):  
R. Manurung ◽  
Taslim ◽  
A.G.A. Siregar
Keyword(s):  
Palm Oil ◽  
Raw Materials ◽  
Choline Chloride ◽  
Deep Eutectic Solvent ◽  
Deep Eutectic Solvents ◽  
Biodiesel Production ◽  
Chloride Salt ◽  
Enzymatic Reactions ◽  
Potential Applications ◽  
Palm Oil Biodiesel

Deep eutectic solvents (DESs) have numerous potential applications as cosolvents. In this study, use of DES as organic solvents for enzymatic biodiesel production from degumming palm oil (DPO) was investigated. Deep eutectic solvent was synthesized using choline chloride salt (ChCl) compounds with glycerol and 1,2-propanediol. Deep eutectic solvent was characterized by viscosity, density, pH and freezing values, which were tested for effectiveness by enzymatic reactions for the production of palm biodiesel with raw materials DPO. Deep eutectic solvent of ChCl and glycerol produced the highest biodiesel yield (98.98%); weight of DES was only 0.5 % of that of the oil. In addition, the use of DES maintained the activity and stability of novozym enzymes, which was assessed as the yield until the 6th usage, which was 95.07 % biodiesel yield compared with the yield without using DES. Hence, using DES, glycerol in enzymatic biodiesel production had high potentiality as an organic solvent for palm oil biodiesel production

scholarly journals Biodiesel production using co-solvents: a review

2020 ◽  
Vol 9 (1) ◽  
pp. e99911672
Author(s):  
George Simonelli ◽  
José Mario Ferreira Júnior ◽  
Carlos Augusto de Moraes Pires ◽  
Luiz Carlos Lobato dos Santos
Keyword(s):  
Potassium Hydroxide ◽  
Fatty Acid Methyl Esters ◽  
State Of The Art ◽  
Methyl Esters ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Review Of The Literature ◽  
Transfer Resistance ◽  
Acid Methyl ◽  
High Yields

Biodiesel is a renewable and biodegradable biofuel, generally produced by the fatty materials transesterification. Due to its importance in the diversification of the energy matrix of countries, various studies have been carried out to improve its production process. One of the technologies developed is the use of co-solvents in the process. The co-solvents decrease the mass transfer resistance between the oil and the alcohol during the chemical reaction. In this paper, a review of the literature on the biodiesel production using co-solvents was presented. The research gathered information about various studies that are relevant to the theme, aiming to show the state of the art, the substances most used as co-solvents, and the conditions of the process variables that result in high yields of fatty acid methyl esters (FAME). In the homogeneous basic catalysis of vegetable oils, potassium hydroxide is the most used catalyst. Its range of application normally varies from 0.5% to 1.8% in relation to the mass of oil. The reaction time may vary from 10 minutes to 2 hours, the temperature from 25 °C to 100 °C, the molar ratio (MR), from 3:1 to 12:1, and the amount of 30% (w/w) co-solvent, or in some cases up to 0.7:1 co-solvent to alcohol molar ratio.

scholarly journals Trends in Widely Used Catalysts for Fatty Acid Methyl Esters (FAME) Production: A Review

Catalysts ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 1085
Author(s):  
Shafaq Nisar ◽  
Muhammad Asif Hanif ◽  
Umer Rashid ◽  
Asma Hanif ◽  
Muhammad Nadeem Akhtar ◽  
...  
Keyword(s):  
Fatty Acid ◽  
Large Scale ◽  
Heterogeneous Catalysts ◽  
Fatty Acid Methyl Esters ◽  
Low Cost ◽  
Methyl Esters ◽  
Acid Catalyst ◽  
Product Formation ◽  
Biodiesel Production ◽  
Acid Methyl

The effective transesterification process to produce fatty acid methyl esters (FAME) requires the use of low-cost, less corrosive, environmentally friendly and effective catalysts. Currently, worldwide biodiesel production revolves around the use of alkaline and acidic catalysts employed in heterogeneous and homogeneous phases. Homogeneous catalysts (soluble catalysts) for FAME production have been widespread for a while, but solid catalysts (heterogeneous catalysts) are a newer development for FAME production. The rate of reaction is much increased when homogeneous basic catalysts are used, but the main drawback is the cost of the process which arises due to the separation of catalysts from the reaction media after product formation. A promising field for catalytic biodiesel production is the use of heteropoly acids (HPAs) and polyoxometalate compounds. The flexibility of their structures and super acidic properties can be enhanced by incorporation of polyoxometalate anions into the complex proton acids. This pseudo liquid phase makes it possible for nearly all mobile protons to take part in the catalysis process. Carbonaceous materials which are obtained after sulfonation show promising catalytic activity towards the transesterification process. Another promising heterogeneous acid catalyst used for FAME production is vanadium phosphate. Furthermore, biocatalysts are receiving attention for large-scale FAME production in which lipase is the most common one used successfully This review critically describes the most important homogeneous and heterogeneous catalysts used in the current FAME production, with future directions for their use.

scholarly journals Biodiesel Production from Rubber Seed Oil by Transesterification Using a Co-solvent of Fatty Acid Methyl Esters

2018 ◽  
Vol 41 (5) ◽  
pp. 1013-1018 ◽  
Author(s):  
Hanh Ngoc Thi Le ◽  
Kiyoshi Imamura ◽  
Norie Watanabe ◽  
Masakazu Furuta ◽  
Norimichi Takenaka ◽  
...  
Keyword(s):  
Fatty Acid ◽  
Fatty Acid Methyl Esters ◽  
Seed Oil ◽  
Methyl Esters ◽  
Biodiesel Production ◽  
Rubber Seed Oil ◽  
Rubber Seed ◽  
Acid Methyl

scholarly journals Exhaust emission profiling of fatty acid methyl esters and NOx control studies using selective synthetic and natural additives

2018 ◽  
Vol 20 (3) ◽  
pp. 589-601 ◽  
Author(s):  
Saad Afzal ◽  
Muhammad Waseem Mumtaz ◽  
Umer Rashid ◽  
Muhammad Danish ◽  
Muhammad Asam Raza ◽  
...  
Keyword(s):  
Fatty Acid ◽  
Fatty Acid Methyl Esters ◽  
Methyl Esters ◽  
Exhaust Emission ◽  
Acid Methyl ◽  
Nox Control ◽  
Natural Additives

Lubricating Properties of Diesel Fuel and Hydrogenated Vegetable Oil with Palm Oil Biodiesel Blends Using HFRR Method

2021 ◽  
Author(s):  
Nur Allif Fathurrahman ◽  
Ahmad Syihan Auzani ◽  
Rizal Zaelani ◽  
Riesta Anggarani ◽  
Lies Aisyah ◽  
...  
Keyword(s):  
Vegetable Oil ◽  
Palm Oil ◽  
Diesel Fuel ◽  
Biodiesel Blends ◽  
Hydrogenated Vegetable Oil ◽  
Palm Oil Biodiesel ◽  
Lubricating Properties
Sign in / Sign up

Export Citation Format

Share Document