scholarly journals Trends in Widely Used Catalysts for Fatty Acid Methyl Esters (FAME) Production: A Review

Catalysts ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 1085
Author(s):  
Shafaq Nisar ◽  
Muhammad Asif Hanif ◽  
Umer Rashid ◽  
Asma Hanif ◽  
Muhammad Nadeem Akhtar ◽  
...  
Keyword(s):  
Fatty Acid ◽  
Large Scale ◽  
Heterogeneous Catalysts ◽  
Fatty Acid Methyl Esters ◽  
Low Cost ◽  
Methyl Esters ◽  
Acid Catalyst ◽  
Product Formation ◽  
Biodiesel Production ◽  
Acid Methyl

The effective transesterification process to produce fatty acid methyl esters (FAME) requires the use of low-cost, less corrosive, environmentally friendly and effective catalysts. Currently, worldwide biodiesel production revolves around the use of alkaline and acidic catalysts employed in heterogeneous and homogeneous phases. Homogeneous catalysts (soluble catalysts) for FAME production have been widespread for a while, but solid catalysts (heterogeneous catalysts) are a newer development for FAME production. The rate of reaction is much increased when homogeneous basic catalysts are used, but the main drawback is the cost of the process which arises due to the separation of catalysts from the reaction media after product formation. A promising field for catalytic biodiesel production is the use of heteropoly acids (HPAs) and polyoxometalate compounds. The flexibility of their structures and super acidic properties can be enhanced by incorporation of polyoxometalate anions into the complex proton acids. This pseudo liquid phase makes it possible for nearly all mobile protons to take part in the catalysis process. Carbonaceous materials which are obtained after sulfonation show promising catalytic activity towards the transesterification process. Another promising heterogeneous acid catalyst used for FAME production is vanadium phosphate. Furthermore, biocatalysts are receiving attention for large-scale FAME production in which lipase is the most common one used successfully This review critically describes the most important homogeneous and heterogeneous catalysts used in the current FAME production, with future directions for their use.

scholarly journals Biodiesel Production from Rubber Seed Oil by Transesterification Using a Co-solvent of Fatty Acid Methyl Esters

2018 ◽  
Vol 41 (5) ◽  
pp. 1013-1018 ◽  
Author(s):  
Hanh Ngoc Thi Le ◽  
Kiyoshi Imamura ◽  
Norie Watanabe ◽  
Masakazu Furuta ◽  
Norimichi Takenaka ◽  
...  
Keyword(s):  
Fatty Acid ◽  
Fatty Acid Methyl Esters ◽  
Seed Oil ◽  
Methyl Esters ◽  
Biodiesel Production ◽  
Rubber Seed Oil ◽  
Rubber Seed ◽  
Acid Methyl

Chromatographic characterization of triacylglycerides and fatty acid methyl esters in microalgae oils for biodiesel production

2013 ◽  
Vol 5 (5) ◽  
pp. 053111 ◽  
Author(s):  
A. T. Soares ◽  
B. F. Silva ◽  
L. L. Fialho ◽  
M. A. G. Pequeno ◽  
A. A. H. Vieira ◽  
...  
Keyword(s):  
Fatty Acid ◽  
Fatty Acid Methyl Esters ◽  
Methyl Esters ◽  
Biodiesel Production ◽  
Acid Methyl ◽  
Chromatographic Characterization

scholarly journals Fatty Acid Methyl Esters of the Aerophytic Cave Alga Coccomyxa subglobosa as a Source for Biodiesel Production

Energies ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 6494
Author(s):  
Joanna Czerwik-Marcinkowska ◽  
Katarzyna Gałczyńska ◽  
Jerzy Oszczudłowski ◽  
Andrzej Massalski ◽  
Jacek Semaniak ◽  
...  
Keyword(s):  
Fatty Acid ◽  
Large Scale ◽  
Methyl Esters ◽  
Acid Methyl Ester ◽  
Biodiesel Production ◽  
Gas Chromatography Mass Spectrometry ◽  
Confocal Laser ◽  
Algal Culture ◽  
Acid Methyl ◽  
Lipid Species

The microscopic alga Coccomyxa subglobosa, collected from the Głowoniowa Nyża Cave (Tatra Mountains, Poland), is a source of fatty acids (FAs) that could be used for biodiesel production. FAs from subaerial algae have unlimited availability because of the ubiquity of algae in nature. Algal culture was carried out under laboratory conditions and algal biomass was measured during growth phase, resulting in 5 g of dry weight (32% oil). The fatty acid methyl ester (FAME) profile was analyzed by means of gas chromatography–mass spectrometry (GC–MS). The presence of lipids and chloroplasts in C. subglobosa was demonstrated using GC–MS and confocal laser microscopy. Naturally occurring FAMEs contained C12–C24 compounds, and methyl palmitate (28.5%) and methyl stearate (45%) were the predominant lipid species. Aerophytic algae could be an important component of biodiesel production, as they are omnipresent and environmentally friendly, contain more methyl esters than seaweed, and can be easily produced on a large scale.

scholarly journals Prospecting for Oleaginous and Robust Chlorella spp. for Coal-Fired Flue-Gas-Mediated Biodiesel Production

Energies ◽  
2018 ◽  
Vol 11 (8) ◽  
pp. 2026 ◽  
Author(s):  
Bohwa Kim ◽  
Ramasamy Praveenkumar ◽  
Eunji Choi ◽  
Kyubock Lee ◽  
Sang Jeon ◽  
...  
Keyword(s):  
Fatty Acid ◽  
Lipid Content ◽  
Flue Gas ◽  
Fatty Acid Methyl Esters ◽  
Methyl Esters ◽  
International Standards ◽  
Biodiesel Production ◽  
Acid Methyl ◽  
G Cell ◽  
Mixotrophic Conditions

Prospecting for robust and high-productivity strains is a strategically important step in the microalgal biodiesel process. In this study, 30 local strains of Chlorella were evaluated in photobioreactors for biodiesel production using coal-fired flue-gas. Three strains (M082, M134, and KR-1) were sequentially selected based on cell growth, lipid content, and fatty acid composition under autotrophic and mixotrophic conditions. Under autotrophic conditions, M082 and M134 showed comparable lipid contents (ca. 230 mg FAME [fatty acid methyl esters derived from microalgal lipids]/g cell) and productivities (ca. 40 mg FAME/L·d) versus a reference strain (KR-1) outdoors with actual flue-gas (CO2, 13%). Interestingly, under mixotrophic conditions, M082 demonstrated, along with maximal lipid content (397 mg FAME/g cell), good tolerance to high temperature (40 °C). Furthermore, the fatty acid methyl esters met important international standards under all of the tested culture conditions. Thus, it was concluded that M082 can be a feedstock of choice for coal-fired, flue-gas-mediated biodiesel production.

scholarly journals Fatty Acid Methyl Esters from the Herbal Industry Wastes as a Potential Feedstock for Biodiesel Production

Energies ◽  
2020 ◽  
Vol 13 (14) ◽  
pp. 3702
Author(s):  
Aneta Sienkiewicz ◽  
Alicja Piotrowska-Niczyporuk ◽  
Andrzej Bajguz
Keyword(s):  
Fatty Acid ◽  
Fatty Acid Methyl Esters ◽  
Methyl Esters ◽  
Cetane Number ◽  
Biodiesel Production ◽  
Ultrasound Assisted Extraction ◽  
Selected Ion Monitoring ◽  
Acid Methyl ◽  
Assisted Extraction ◽  
Potential Resource

Due to thegrowing awareness of fossil fuel depletion and environmental issues, biodiesel alternative fuel is currently of substantial interest. This research assessed herbal industry wastes as a potential resource for biodiesel production for the first time. Fatty acid methyl esters (FAMEs), obtained in the transesterification reaction, were extracted from the herbal samples by ultrasound-assisted extraction and identified withgas chromatography-mass spectrometry in the selected ion monitoring mode. The presence of at least 20 (e.g., in chamomile and chicory) FAMEs, up to 31 in nettle and senna, was reported. The unsaturated FAMEs were found in higher amounts than saturated. Linoleic acidwas the major polyunsaturated FAME in herbal wastes, while palmitic acid was the major saturated FAME. The highest content of FAMEs was identified in rye bran, Figure tea, and chicory. According to the cetane number prediction, BS EN 14214:2012+A2:2019, and hierarchical clustering on principal components (HCPC)wastes from, e.g., nettle, sage, and senna, are the most suitable in biodiesel production with fuel properties acceptable by the EuropeanStandards.Principal component analysis and HCPC allowed to classify and groupsimilar plants according to their FAMEs content; however, additional studies of herbal biofuel properties are needed.

Synthesis of Biodiesel by Different Carriers Supported KOH Catalyst

2012 ◽  
Vol 581-582 ◽  
pp. 197-201 ◽  
Author(s):  
Ling Mei Yang ◽  
Peng Mei Lv ◽  
Zhen Hong Yuan ◽  
Wen Luo ◽  
Hui Wen Li ◽  
...  
Keyword(s):  
Fatty Acid ◽  
Soybean Oil ◽  
Heterogeneous Catalysts ◽  
Fatty Acid Methyl Esters ◽  
Methyl Esters ◽  
Molar Ratio ◽  
Reaction Conditions ◽  
Catalyst Amount ◽  
Acid Methyl ◽  
And Performance

Transesterification of soybean oil with methanol to methyl eaters was found proceed in the presence of KOH loaded on five different oxides (CaO, MgO, Al2O3, Bentonite, kaolin) as heterogeneous catalysts. The structure and performance of these catalysts were studied using the techniques of XRD, CO2-TPD, and SEM. It was found that the 15wt% KOH/CaO catalyst provided best activity. In the presence of this catalyst, the yield of fatty acid methyl esters was 97.1%. The reaction conditions were as follows: methanol to soybean oil molar ratio was 16:1, temperature of 65 °C, reaction time of 1 h, and a catalyst amount of 4 wt%. The catalysts of KOH loaded on CaO showed a new crystalline phase of K2O. However, the catalyst of 15-KOH/CaO has more basic sites than the catalyst of 15-KOH/MgO. Therefore, the catalyst of 15-KOH/CaO has been associated with higher transesterification activity.

Sign in / Sign up

Export Citation Format

Share Document