scholarly journals Development of Wood Apple Shell (Feronia acidissima) Powder Biosorbent and Its Application for the Removal of Cd(II) from Aqueous Solution

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Ch. Suresh ◽  
D. Harikisore Kumar Reddy ◽  
Yapati Harinath ◽  
B. Ramesh Naik ◽  
K. Seshaiah ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Metal Ion ◽  
Ion Concentration ◽  
Isotherm Models ◽  
X Ray Diffraction ◽  
Biosorption Process ◽  
Initial Ph ◽  
Carboxylic Groups ◽  
Pseudo Second Order ◽  
Complexation Reactions

A biosorbent was prepared by using wood apple shell (WAS) powder and studied its application for the removal of Cd(II) from aqueous solution by a batch method. The biosorbent was characterized by infrared spectroscopy, X-ray diffraction, scanning electron microscopy, and elemental analysis. WAS is principally made up of lignin and cellulose, containing functional groups such as alcoholic, ketonic, and carboxylic groups which can be involved in complexation reactions with Cd(II). The effect of experimental parameters like initial pH, contact time, metal ion concentration, and sorbent dose on adsorption was investigated. The optimum pH for biosorption of Cd(II) onto WAS was found to be pH 5.0 and the quantitative removal of Cd(II) ions was achieved in 30 min. The kinetic study showed that the biosorption process followed the pseudo-second-order rate. Experimental data were analyzed by Langmuir, Freundlich, and Dubinin-Radushkevich isotherm models. Desorption studies were carried out using HCl solution.

scholarly journals Preparation and characterization of chitosan/Fe2O3 nano composite for the adsorption of thorium (IV) ion from aqueous solution

2018 ◽  
Vol 78 (3) ◽  
pp. 708-720 ◽  
Author(s):  
B. Rouhi Broujeni ◽  
A. Nilchi ◽  
A. H. Hassani ◽  
R. Saberi
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Metal Ion ◽  
Ion Concentration ◽  
P Value ◽  
X Ray Diffraction ◽  
Nano Composite ◽  
Statistical Measures ◽  
Pseudo Second Order

Abstract In this study, novel chitosan/Fe2O3nano composite Ch/Fe-Onc was synthesized and evaluated as an adsorbent for removing thorium (IV) (Th4+) ion from aqueous solution. The Ch/Fe-Onc was characterized by X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), Fourier transform infrared (FTIR) and scanning electron microscopy (SEM). Response surface methodology (RSM) was used in the optimization of Th4+ adsorption for parameters such as pH, the initial metal ion concentration (Th4+ concentration) and contact time. The statistical measures (i.e. analysis of variance, R2, the lack of fit test and the P value) specify that the developed model is proper. Furthermore, the adsorption kinetics was well defined by the pseudo-second-order equation, while the adsorption isotherms were better fitted by the Langmuir model. The adsorption capacity of Ch/Fe-Onc was 430 mg Th4+g−1 composite which leads to 99% removal at 25 °C. Moreover, thermodynamic parameters which state the natural and endothermic nature of the reactions were determined. The loaded Th4+ can be easily regenerated with HNO3 and the Ch/Fe-Onc can be used repeatedly without any significant reduction in its adsorption capacity. The desorption level of Th4+ from the Ch/Fe-Onc by using 0.1 M HNO3, was more than 95%.

scholarly journals Isothermal, kinetics and thermodynamics studies of the biosorption of Pb(II) ion from aqueous solution using the scale of croaker fish (Genyonemus lineatus)

2013 ◽  
Vol 3 (3) ◽  
pp. 239-248
Author(s):  
Mojisola O. Nkiko ◽  
Abideen I. Adeogun ◽  
N. A. Adesola Babarinde ◽  
Oluwabunmi J. Sharaibi
Keyword(s):  
Aqueous Solution ◽  
Metal Ion ◽  
Sorption Process ◽  
Ion Concentration ◽  
Isothermal Kinetics ◽  
Fish Scale ◽  
Biosorption Process ◽  
Equilibrium Data ◽  
Pseudo Second Order ◽  
Biomass Dosage

Biosorbent prepared from the scale of croaker fish (Genyonemus lineatus) has been used for the removal of Pb(II) ion from aqueous solution in a batch system. The effects of some important parameters such as pH, initial metal concentration, temperature and biosorbent dosage on biosorption capacity were investigated. Equilibrium time for the biosorption process is 20 and 30 min at lower and higher concentrations, respectively. The process at 28 °C is in agreement with a pseudo-second-order kinetics model. The equilibrium data obeyed the Langmuir adsorption isotherm with a maximum monolayer adsorption capacity of 14.58 mg g−1. The study showed that the sorption process depends on biomass dosage, temperature, pH and initial metal ion concentration. The calculated thermodynamics parameters (ΔGo, ΔHo and ΔSo) indicated that the biosorption of the metal ion onto fish scale is feasible, spontaneous and exothermic in nature.

Removal of copper(II) and cadmium(II) ions from aqueous solutions by biosorption onto pine cone

2012 ◽  
Vol 66 (3) ◽  
pp. 564-572 ◽  
Author(s):  
Görkem Değirmen ◽  
Murat Kılıç ◽  
Özge Çepelioğullar ◽  
Ayşe E. Pütün
Keyword(s):  
Aqueous Solutions ◽  
Metal Ion ◽  
Low Cost ◽  
Ion Concentration ◽  
Isotherm Models ◽  
Diffusion Kinetic ◽  
Biosorption Process ◽  
Biosorption Mechanism ◽  
Pine Cone ◽  
Pseudo Second Order

In this study, the removal of copper(II) and cadmium(II) ions from aqueous solutions by biosorption onto pine cone was studied. Variables that affect the biosorption process such as pH, biosorbent dosage, initial metal ion concentration, contact time and temperature of solution were optimized. Experimental data were fitted to Langmuir, Freundlich, Dubinin Radushkevich and Temkin isotherm models to investigate the equilibrium isotherms. Pseudo-first-order, pseudo-second-order and intraparticle diffusion kinetic models were used to determine the biosorption mechanism. The thermodynamics of biosorption were studied for predicting the nature of biosorption. Experimental results showed that pine cone could be evaluated as an alternative precursor for removal of heavy metal ions from aqueous solutions, due to its high biosorption capacity, availability, and low cost.

scholarly journals Ricinus CommunisPericarp Activated Carbon Used as an Adsorbent for the Removal of Ni(II) From Aqueous Solution

2008 ◽  
Vol 5 (4) ◽  
pp. 761-769 ◽  
Author(s):  
S. Madhavakrishnan ◽  
K. Manickavasagam ◽  
K. Rasappan ◽  
P. S. Syed Shabudeen ◽  
R. Venkatesh ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Particle Size ◽  
Activated Carbon ◽  
Contact Time ◽  
Metal Ion ◽  
Ricinus Communis ◽  
Ion Concentration ◽  
Batch Mode ◽  
Adsorption Data ◽  
Initial Ph

Activated carbon prepared from Ricinus communis Pericarp was used to remove Ni(II) from aqueous solution by adsorption. Batch mode adsorption experiments are carried out by varying contact time, metal-ion concentration, carbon concentration and pH to assess kinetic and equilibrium parameters. The adsorption data were modeled by using both Langmuir and Freundlich classical adsorption isotherms. The adsorption capacity (Qo) calculated from the Langmuir isotherm was 31.15 mg/g of activated carbon at initial pH of 5.0±0.2 for the particle size 125-250 µm.

scholarly journals Adsorption of Cr6+ Onto Unmodified and Hydrochloric Acid Modified African Nutmeg Pod (Monodora myristica) from Aqueous Solution

2019 ◽  
pp. 1-8
Author(s):  
F. U. Okwunodulu ◽  
H. O. Chukwuemeka-Okorie ◽  
N. M. Mgbemena ◽  
J. B. I. Kalu
Keyword(s):  
Aqueous Solution ◽  
Metal Ion ◽  
Correlation Coefficients ◽  
Freundlich Isotherm ◽  
Low Ph ◽  
Ion Concentration ◽  
Isotherm Models ◽  
Particle Sizes ◽  
Monodora Myristica ◽  
Best Fit

The removal of Cr6+ from aqueous solution using unmodified and hydrochloric modified African nutmeg pod was studied. The effects of particle size, pH and initial metal ions concentration adsorbed were investigated. The amount of metal ion adsorbed increased as the initial metal ion concentration increased and also decreased at low pH of 2 for both modified and unmodified African nutmeg pod.  400 µm and 250 µm were the optimum particle sizes for both modified and unmodified African nutmeg pod respectively, values given as 75.8 mg/g for the modified and 93.39 mg/g for the unmodified. Generally, it was observed that the unmodified African nutmeg pod showed greater adsorption capacity than the modified African nutmeg pod. The equilibrium experimental data were examined via Langmuir and Freundlich isotherm models.  Freundlich isotherm model gave the best fit for the data in both unmodified and modified African nutmeg pod based on the correlation coefficients (R2 values) gotten. The results of the study showed that the African nutmeg pod is efficient for the removal of Cr6+ from aqueous solutions especially when unmodified.

scholarly journals Adsorption of Lead (II) from Aqueous Solution with High Efficiency by Hydrothermal Biochar Derived from Honey

2020 ◽  
Vol 17 (10) ◽  
pp. 3441 ◽  
Author(s):  
Bo Wang ◽  
Jie Yu ◽  
Hui Liao ◽  
Wenkun Zhu ◽  
Pingping Ding ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Photoelectron Spectroscopy ◽  
High Efficiency ◽  
Raw Material ◽  
Before And After ◽  
Initial Ph ◽  
Carboxylic Groups ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Natural Honey

A novel natural honey hydrothermal biochar (HHTB) was prepared using natural honey as raw material. The as-prepared adsorbent was applied to adsorb Pb2+ from aqueous solution and characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy to investigate the structure and morphology change of the adsorbent before and after Pb2+ adsorption. The influence of the pH, initial Pb2+ concentration, temperature, and contact time on the adsorption of Pb2+ was systematically investigated. The results revealed that the adsorption capacity for Pb2+ is up to 133.2 mg·g−1 at initial pH of 5.0 and adsorption temperature of 298 K. Meanwhile, the adsorption of Pb2+ on HHTB can be well fitted by the pseudo-second-order model and Langmuir isotherm model. The adsorbent had great selectivity for Pb2+ from the aqueous solution containing coexisting ions including Cd2+, Co2+, Cr3+, Cu2+, Ni2+ and Zn2+. Furthermore, the adsorption of Pb2+ on HHTB was attributed to complexation coordination, where it involved hydroxyl and carboxylic groups on HHTB in the process of adsorption of Pb2+.

scholarly journals Eco-Efficient Biosorbent Based on Leucaena leucocephala Residues for the Simultaneous Removal of Pb(II) and Cd(II) Ions from Water System: Sorption and Mechanism

2019 ◽  
Vol 2019 ◽  
pp. 1-13 ◽  
Author(s):  
C. A. Cimá-Mukul ◽  
Youness Abdellaoui ◽  
Mohamed Abatal ◽  
Joel Vargas ◽  
Arlette A. Santiago ◽  
...  
Keyword(s):  
Leucaena Leucocephala ◽  
Metal Ion ◽  
Water System ◽  
Ion Concentration ◽  
Point Of Zero Charge ◽  
Southern Mexico ◽  
Lead And Cadmium ◽  
Biosorption Process ◽  
Monolayer Adsorption ◽  
Pseudo Second Order

Leucaena leucocephala is a potential source of polyphenols widely available in southern Mexico. This work highlights the extraction of polyphenols from Leucaena leucocephala leaves waste (LLEPs) and the evaluation of their efficiency to remove the single and multicomponent Pb(II) and Cd(II) metal ions from aqueous solutions. Batch test conditions were carried out to examine the effects of contact time, initial metal ion concentration, and adsorbent dosage on the biosorption process. The surface textures and the composition of the LLEP biosorbent was characterized using pH of point of zero charge (pHPZC), attenuated total reflectance Fourier transform infrared (ATR-FTIR), and matrix-assisted laser desorption/ionization time of flight (MALDI-TOF) mass spectrometry, respectively. Further analysis using ATR-FTIR after adsorption contact of biosorbent was also investigated. The highest Langmuir saturation monolayer adsorption capacity, qm, for the removal of Pb(II) by LLEPs was obtained as 25.51 and 21.55 mg/g in mono- and bimetal solutions, respectively. The pseudo-second-order model provided the best fit for the kinetic data obtained for the removal of Pb(II), Cd(II), and their mixture, and the k2 values depend on the adsorbent mass. This implied that the chemisorption process might be the mechanism of the solute ions-LLEPs interaction in this study. Furthermore, nearly 100% removal of lead and cadmium individually and 95% of their mixture was found using 0.9 g of LLEPs.

scholarly journals Sorption Efficiency of a New Sorbent towards Cadmium(II): Methylphosphonic Acid Grafted Polystyrene Resin

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Nacer Ferrah ◽  
Omar Abderrahim ◽  
Mohamed Amine Didi ◽  
Didier Villemin
Keyword(s):  
Metal Ion ◽  
Ph Value ◽  
Ion Concentration ◽  
Methylphosphonic Acid ◽  
Order Kinetic ◽  
Elementary Analysis ◽  
Optimum Ph ◽  
Initial Ph ◽  
Pseudo Second Order ◽  
Polystyrene Resin

A new chelating polymeric sorbent has been developed using polystyrene resin grafted with phosphonic acid. After characterization by FTIR and elementary analysis, the new resin has been investigated in liquid-solid extraction of cadmium(II). The results indicated that phosphonic resin could adsorb Cd(II) ion effectively from aqueous solution. The adsorption was strongly dependent on the pH of the medium and the optimum pH value level for better sorption was between 3.2 and 5.2. The influence of other analytical parameters including contact time, amount of resin, metal ion concentration, and the presence of some electrolytes was investigated. The maximum uptake capacity of Cd(II) ions was 37,9 mg·g−1grafted resin at ambient temperature, at an initial pH value of 5.0. The overall adsorption process was best described by pseudo second-order kinetic. When Freundlich and Langmuir isotherms were tested, the latter had a better fit with the experimental data. Furthermore, more than 92% of Cd(II) could be eluted by using 1.0 mol·L−1HCl in one cycle.

Thermodynamic and Kinetic Models for Removal of Thorium from Aqueous Solution

2017 ◽  
Vol 6 (1) ◽  
pp. 148-156
Author(s):  
P. Indhumathi ◽  
S. Sathiyaraj ◽  
U. S. Shoba ◽  
P. S. Syed Shabudeen ◽  
C. Jayabalakrishnan
Keyword(s):  
Aqueous Solution ◽  
Kinetic Models ◽  
Metal Ion ◽  
Adsorption Equilibrium ◽  
Cost Effective ◽  
Ion Concentration ◽  
Isotherm Models ◽  
Adsorptive Removal ◽  
Adsorption Data ◽  
Water And Wastewater

Adsorption is a unique process for the removal of pollutants from water and wastewater since the process is cost effective, easily adoptable and environmentally compatible. The micro algae are a promising way to produce a useful adsorbent for Thorium (VI) removal from aqueous solution. The specific surface area of the microalgae was determined and its properties studied by scanning electron microscopy (SEM). Adsorptive removal of Thorium (VI) from aqueous solution on micro algae has been studied under varying conditions of agitation time, metal ion concentration, adsorbent dose and pH to assess the kinetic and equilibrium parameters. Adsorption equilibrium was obtained in 120 min for 20 to 120 mg/L of Thorium (VI) concentrations. The Langmuir, Freundlich, Temkin, Redlich-Peterson isotherm models, kinetic models and thermodynamic models were found to provide an excellent fitting of the adsorption data. The adsorption capacity of thorium 91.73% maximum percent removal in thorium at pH 3. This adsorbent was found to be effective and economically attractive.

Adsorption of heavy metals from aqueous solutions by Mg–Al–Zn mingled oxides adsorbent

2016 ◽  
Vol 74 (7) ◽  
pp. 1644-1657 ◽  
Author(s):  
Mona El-Sayed ◽  
Gh. Eshaq ◽  
A. E. ElMetwally
Keyword(s):  
Heavy Metals ◽  
Metal Ion ◽  
Second Order ◽  
Ion Concentration ◽  
Precipitation Method ◽  
Isotherm Models ◽  
Infrared Spectrometry ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Pseudo Second Order

In our study, Mg–Al–Zn mingled oxides were prepared by the co-precipitation method. The structure, composition, morphology and thermal stability of the synthesized Mg–Al–Zn mingled oxides were analyzed by powder X-ray diffraction, Fourier transform infrared spectrometry, N2 physisorption, scanning electron microscopy, differential scanning calorimetry and thermogravimetry. Batch experiments were performed to study the adsorption behavior of cobalt(II) and nickel(II) as a function of pH, contact time, initial metal ion concentration, and adsorbent dose. The maximum adsorption capacity of Mg–Al–Zn mingled oxides for cobalt and nickel metal ions was 116.7 mg g−1, and 70.4 mg g−1, respectively. The experimental data were analyzed using pseudo-first- and pseudo-second-order kinetic models in linear and nonlinear regression analysis. The kinetic studies showed that the adsorption process could be described by the pseudo-second-order kinetic model. Experimental equilibrium data were well represented by Langmuir and Freundlich isotherm models. Also, the maximum monolayer capacity, qmax, obtained was 113.8 mg g−1, and 79.4 mg g−1 for Co(II), and Ni(II), respectively. Our results showed that Mg–Al–Zn mingled oxides can be used as an efficient adsorbent material for removal of heavy metals from industrial wastewater samples.

Sign in / Sign up

Export Citation Format

Share Document