Removal of copper(II) and cadmium(II) ions from aqueous solutions by biosorption onto pine cone

2012 ◽  
Vol 66 (3) ◽  
pp. 564-572 ◽  
Author(s):  
Görkem Değirmen ◽  
Murat Kılıç ◽  
Özge Çepelioğullar ◽  
Ayşe E. Pütün
Keyword(s):  
Aqueous Solutions ◽  
Metal Ion ◽  
Low Cost ◽  
Ion Concentration ◽  
Isotherm Models ◽  
Diffusion Kinetic ◽  
Biosorption Process ◽  
Biosorption Mechanism ◽  
Pine Cone ◽  
Pseudo Second Order

In this study, the removal of copper(II) and cadmium(II) ions from aqueous solutions by biosorption onto pine cone was studied. Variables that affect the biosorption process such as pH, biosorbent dosage, initial metal ion concentration, contact time and temperature of solution were optimized. Experimental data were fitted to Langmuir, Freundlich, Dubinin Radushkevich and Temkin isotherm models to investigate the equilibrium isotherms. Pseudo-first-order, pseudo-second-order and intraparticle diffusion kinetic models were used to determine the biosorption mechanism. The thermodynamics of biosorption were studied for predicting the nature of biosorption. Experimental results showed that pine cone could be evaluated as an alternative precursor for removal of heavy metal ions from aqueous solutions, due to its high biosorption capacity, availability, and low cost.

scholarly journals Studies on Removal of Cr (VI) from Aqueous Solutions Using Powder of Mosambi Fruit Peelings (PMFP) As a Low Cost Sorbent

2012 ◽  
Vol 9 (3) ◽  
pp. 1389-1399 ◽  
Author(s):  
R. Hema Krishna ◽  
A. V. V. S. Swamy
Keyword(s):  
Particle Size ◽  
Aqueous Solutions ◽  
Metal Ion ◽  
Low Cost ◽  
Ion Concentration ◽  
Isotherm Models ◽  
Batch Tests ◽  
Freundlich Adsorption Isotherm ◽  
Equilibrium Data ◽  
Agitation Time

The powder of mosambi fruit peelings (PMFP) was used as an adsorbent for the removal of heavy metal like Cr (VI) from aqueous solutions was studied using batch tests. The influence of physico-chemical key parameters such as the initial metal ion concentration, pH, agitation time, adsorbent dosage, and the particle size of adsorbent has been considered in batch tests. Sorbent ability to adsorb Cr (VI) ions was examined and the mechanism involved in the process investigated. The optimum results were determined at an initial metal ion concentration was 10 mg/lit, pH=2, agitation time – 60 min, an adsorbent dose (150 mg/50 ml) and the particle size (0.6 mm). The % adsorption, Langmuir constants [Q0=7.51(mg/g) and b=1.69(mg/lit)] Freundlich constant(Kf=2.94), Lagergren rate constants (Kad(min-1)=5.75 x 10-2) for [Cr(VI)] 10 mg/lit were determined for the adsorption system as a function of sorbate concentration. The equilibrium data obtained were tested using Langmuir, Freundlich adsorption isotherm models, and the kinetic data obtained were fitted to pseudo first order model.

scholarly journals Adsorption Behaviour of La(III) and Eu(III) Ions from Aqueous Solutions by Hydroxyapatite: Kinetic, Isotherm, and Thermodynamic Studies

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
F. Granados-Correa ◽  
J. Vilchis-Granados ◽  
M. Jiménez-Reyes ◽  
L. A. Quiroz-Granados
Keyword(s):  
Aqueous Solutions ◽  
Metal Ion ◽  
Low Cost ◽  
Intraparticle Diffusion ◽  
Ion Concentration ◽  
Adsorption Behaviour ◽  
Freundlich Model ◽  
Adsorption Data ◽  
Isotherm Adsorption ◽  
Pseudo Second Order

The hydroxyapatite was successfully synthesized, characterized, and used as an alternative low-cost adsorbent material to study the adsorption behavior of La(III) and Eu(III) ions from nitrate aqueous solutions as a function of contact time, initial metal ion concentration, pH, and temperature by using a bath technique. The kinetic data correspond very well to the pseudo-second-order equation, and in both cases the uptake was affected by intraparticle diffusion. Isotherm adsorption data were well fitted by the Freundlich model equation with1/n>1, indicating a multilayer and cooperative-type adsorption. Thermodynamic parameters for the adsorption systems were determinated at 293, 303, 313, and 323 K. These parameters show that adsorptions of La(III) and Eu(III) ions on hydroxyapatite are endothermic and spontaneous processes. The adsorption was found to follow the order Eu(III) > La(III) and is dependent on ion concentration, pH, and temperature.

scholarly journals Effective Biosorption of Nickel(II) from Aqueous Solutions UsingTrichoderma viride

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
P. Sujatha ◽  
V. Kalarani ◽  
B. Naresh Kumar
Keyword(s):  
Aqueous Solutions ◽  
Metal Ion ◽  
Low Cost ◽  
Trichoderma Viride ◽  
Toxic Metal ◽  
Freundlich Isotherm ◽  
Recovery Process ◽  
Primary Objective ◽  
Ion Concentration ◽  
Isotherm Models

The primary objective of the present study is to evaluate the optimization conditions such as kinetic and equilibrium isotherm models involved in the removal of Ni(II) from the aqueous solutions byTrichoderma viride. The biosorbent was characterized by FTIR and SEM. The optimum biosorption conditions were determined as a function of pH, biomass dosage, contact time, initial metal ion concentration, and temperature. The maximum Ni(II) biosorption was obtained at pH 4.5. The equilibrium data were better fit by the Langmuir isotherm model than by the Freundlich isotherm. The kinetic studies indicate that the biosorption process of the metal ion Ni(II) has followed well the pseudo-second-order model. The sum of the square errors (SSE) and chi-square (χ2) tests were also carried out to find the best fit kinetic model and adsorption isotherm. The maximum biosorption capacity (qm) ofT.viridebiomass was found to be 47.6 mg/g for Ni(II) ion. Therefore, it can be concluded thatT.viridebiomass was effective and low-cost potential adsorbent to remove the toxic metal Ni(II) from aqueous solutions. The recovery process of Ni(II) fromT.viridebiomass was found to be higher than 98% by using 0.25 M HNO3. Besides the application of removal of toxic metal Ni(II) from aqueous solutions, the biosorbentT.viridecan be reused for five consecutive sorption-desorption cycles was determined.

scholarly journals Adsorptive removal of pentachlorophenol from aqueous solutions using powdered eggshell

2017 ◽  
Vol 43 (3) ◽  
pp. 10-16 ◽  
Author(s):  
Krzysztof Kuśmierek ◽  
Paulina Idźkiewicz ◽  
Andrzej Świątkowski ◽  
Lidia Dąbek
Keyword(s):  
Aqueous Solutions ◽  
Low Cost ◽  
Second Order ◽  
Isotherm Models ◽  
Order Model ◽  
Diffusion Kinetic ◽  
Monolayer Adsorption ◽  
Equilibrium Data ◽  
Intra Particle Diffusion ◽  
Pseudo Second Order

AbstractThe usefulness of untreated powdered eggshell as low-cost adsorbent for the removal of pentachlorophenol (PCP) from aqueous solutions was investigated. The most important parameters affecting the adsorption process, including the pH and ionic strength, were examined. The adsorption characteristics of PCP onto eggshell were evaluated in terms of kinetic and equilibrium parameters. The kinetic data were studied in terms of the pseudo-first order, pseudo-second order and intra-particle diffusion kinetic models. The equilibrium data were analyzed using the Langmuir, Freundlich, Sips and Redlich-Peterson isotherm models. The pseudo-second order model best described the adsorption kinetics. Using the Langmuir equation, the monolayer adsorption capacity of eggshell for PCP was found to be 0.127 mg/g. The results showed that PCP can be effectively removed from aqueous solution employing eggshell as a cheap adsorbent.

scholarly journals Biosorptive Removal of Lead (II), Cadmium (II) and Arsenic (III) from Aqua Media on Vigna Unguiculata Leaf Powders

2018 ◽  
Vol 15 (3) ◽  
pp. 567-575
Author(s):  
K.G. Akpomie ◽  
C.C. Ezeofor ◽  
S.I. Eze ◽  
C.N. Okey ◽  
P.I. Ebiem-Kenechukwu
Keyword(s):  
Metal Ions ◽  
Vigna Unguiculata ◽  
Contact Time ◽  
Metal Ion ◽  
Low Cost ◽  
Ion Concentration ◽  
Biosorption Process ◽  
Pseudo Second Order ◽  
Best Fit ◽  
Scatchard Model

The biosorption of Cd (II), As (III) and Pb (II) ions from solution utilizing Vigna unguiculata leaf powders (VULP) as a low cost biosorbent was studied. The influence of temperature, metal ion concentration, biosorbent dose, contact time and pH on the sequestration process was examined by batch procedure. Increase in the biosorption of the three metal ions with increased pH and biosorbent dosage was obtained in this study.Equilibrium contact time of 20, 40 and 50min was achieved for Cd(II), As (III) and Pb(II) ions and biosorption was in the order As(III)> Cd(II) >Pb(II). Isotherm analysis was performed by the application of Langmuir, Freundlich, Flory-Huggins and Scatchard models. The Langmuir model gave the best fit with maximum monolayer biosorption capacity of 109.1, 105 and 119.3 mg/g for Cd (II), Pb (II) and As (III) respectively. Scatchard model confirmed a homogenous surface of VULP and monolayer biosorption of metal ions. Pseudo second order model showed the best fit compared to pseudo first order, Elovich and Banghams kinetic models according to kinetic analysis. Thermodynamics study revealed a feasibly, spontaneous exothermic biosorption process. The result showed good potentials of VULP as suitable cheap biosorbent for attenuation of Cd (II), Pb(II) and As (III) ions from polluted wastewaters.

scholarly journals Development of Wood Apple Shell (Feronia acidissima) Powder Biosorbent and Its Application for the Removal of Cd(II) from Aqueous Solution

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Ch. Suresh ◽  
D. Harikisore Kumar Reddy ◽  
Yapati Harinath ◽  
B. Ramesh Naik ◽  
K. Seshaiah ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Metal Ion ◽  
Ion Concentration ◽  
Isotherm Models ◽  
X Ray Diffraction ◽  
Biosorption Process ◽  
Initial Ph ◽  
Carboxylic Groups ◽  
Pseudo Second Order ◽  
Complexation Reactions

A biosorbent was prepared by using wood apple shell (WAS) powder and studied its application for the removal of Cd(II) from aqueous solution by a batch method. The biosorbent was characterized by infrared spectroscopy, X-ray diffraction, scanning electron microscopy, and elemental analysis. WAS is principally made up of lignin and cellulose, containing functional groups such as alcoholic, ketonic, and carboxylic groups which can be involved in complexation reactions with Cd(II). The effect of experimental parameters like initial pH, contact time, metal ion concentration, and sorbent dose on adsorption was investigated. The optimum pH for biosorption of Cd(II) onto WAS was found to be pH 5.0 and the quantitative removal of Cd(II) ions was achieved in 30 min. The kinetic study showed that the biosorption process followed the pseudo-second-order rate. Experimental data were analyzed by Langmuir, Freundlich, and Dubinin-Radushkevich isotherm models. Desorption studies were carried out using HCl solution.

Use of sesame stalk biomass for the removal of Ni(II) and Zn(II) from aqueous solutions

2012 ◽  
Vol 66 (2) ◽  
pp. 231-238 ◽  
Author(s):  
Çisem Kırbıyık ◽  
Murat Kılıç ◽  
Özge Çepelioğullar ◽  
Ayşe E. Pütün
Keyword(s):  
Aqueous Solutions ◽  
Metal Ions ◽  
Metal Ion ◽  
Low Cost ◽  
Second Order ◽  
Solution Temperature ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Pseudo Second Order

In this study an agricultural residue, sesame stalk, was evaluated for the removal of Ni(II) and Zn(II) metal ions from aqueous solutions. Biosorption studies were carried out at different pH, biosorbent dosage, initial metal ion concentrations, contact time, and solution temperature to determine the optimum conditions. The experimental data were modeled by Langmuir, Freundlich, Dubinin-Radushkevich (D-R) and Temkin isotherm models. Langmuir model resulted in the best fit of the biosorption data. The pseudo-first-order and pseudo-second-order kinetic models were used to describe the kinetic data and to evaluate rate constants. The best correlation was provided by the second-order kinetic model. The thermodynamic parameters such as ΔG°, ΔH° and ΔS° were calculated for predicting the nature of adsorption. The experimental results showed that sesame stalk can be used as an effective and low-cost biosorbent precursor for the removal of heavy metal ions from aqueous solutions.

Moringa oleifera seeds for single and simultaneous removal of Pb2+ and Cd2+ from aqueous solutions

2020 ◽  
Author(s):  
Mohamed Abatal ◽  
Yaneth Stephanie Durán Avendaño ◽  
M. Teresa Olguin ◽  
Joel Vargas
Keyword(s):  
Aqueous Solutions ◽  
Metal Ion ◽  
Moringa Oleifera ◽  
Freundlich Isotherm ◽  
Kinetic Studies ◽  
Ion Concentration ◽  
Isotherm Models ◽  
Sorption Data ◽  
Batch Tests ◽  
Pseudo Second Order

<p>In this study, we report the effectiveness of natural and NaOH treated Moringa oleifera seeds for single and simultaneous Pb<sup>2+ </sup>and Cd<sup>2+</sup> from aqueous solutions. The biosorbent was characterized by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) techniques. The pH of point zero charge (pH<sub>pzc</sub>) was determined. Effects of contact time (15-1440 min), pH of solutions (2-10), mass of biosorbent (0.1-0.5 g) and initial metal ion concentration (10-1000 mg/L) were investigated using batch tests. The results show the pretreatment of biosorbent by NaOH improve significantly uptake capacity (mg/g) of the metal ions (q (Pb<sup>2+</sup>) = 38.45 and q (Cd<sup>2+</sup>) = 17.32 ˃ q (Pb<sup>2+</sup>) = 31.45 and q (Cd<sup>2+</sup>)= 14.67). Kinetic studies shown that the more than 90 % uptake of ion metals occurring within 120-180 min and the experimental data were better describe by a pseudo-second-order model. The sorption data for non-treated and NaOH treated Moringa oleifera seeds were evaluated by the Freundlich isotherm models to describe the adsorption equilibrium.</p>

scholarly journals Biosorption of Co2+ Ions from Aqueous Solution by K2HPO4-Pretreated Duckweed Lemna gibba

Processes ◽  
2020 ◽  
Vol 8 (12) ◽  
pp. 1532
Author(s):  
Jessica Lizeth Reyes-Ledezma ◽  
Eliseo Cristiani-Urbina ◽  
Liliana Morales-Barrera
Keyword(s):  
Aqueous Solutions ◽  
Low Cost ◽  
Co2 Concentration ◽  
Lemna Gibba ◽  
Isotherm Models ◽  
Biosorption Mechanism ◽  
Novel Technology ◽  
Pseudo Second Order ◽  
Divalent Cobalt ◽  
The Many

The wastewater of the many industries that use divalent cobalt (Co2+)-containing compounds has elevated levels of this metal. Thus, novel technology is needed to efficiently remove Co2+ ions from aqueous solutions. Biosorption is a low-cost technique capable of removing heavy metals from contaminated water. This study aims to evaluate the performance of KH2PO4-pretreated Lemna gibba (PLEM) as a biosorbent of Co2+ in aqueous solutions tested under different conditions of pH, particle size, and initial Co2+ concentration. Kinetic, equilibrium, and thermodynamic studies were conducted. The capacity of biosorption increased with a greater initial Co2+ concentration and was optimal at pH 7.0 and with small-sized biosorbent particles (0.3–0.8 mm). The pseudo-second-order sorption model best describes the experimental data on Co2+ biosorption kinetics. The Sips and Redlich-Peterson isotherm models best predict the biosorption capacity at equilibrium. According to the thermodynamic study, biosorption of Co2+ was endothermic and spontaneous. The effect of pH on the biosorption/desorption of Co2+ suggests that electrostatic attraction is the main biosorption mechanism. SEM-EDX verified the presence of Co2+ on the surface of the pretreated-saturated biosorbent and the absence of the metal after desorption.

scholarly journals Adsorption Study of Cu2+ Ions from Aqueous Solutions by Bael Flowers (Aegle marmelos)

2020 ◽  
Vol 11 (4) ◽  
pp. 11891-11904
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Metal Ion ◽  
Low Cost ◽  
Sem Analysis ◽  
Ion Concentration ◽  
Maximum Adsorption Capacity ◽  
Aegle Marmelos ◽  
Batch Mode ◽  
Initial Ph

In the present study, batch mode adsorption was carried out to investigate the adsorption capacity of dried bael flowers (Aegle marmelos) for the adsorptive removal of Cu(II) ions from aqueous solutions by varying agitation time, initial metal concentration, the dose of adsorbent, temperature, and initial pH of the Cu(II) ion solution. The percentage removal of 98.7% was observed at 50 ppm initial metal ion concentration, 0.5 g/100.00 cm3 adsorbent dosage, within the contact time of 120 minutes at 30 ºC in the pH range of 4 – 7. The sorption processes of Cu(II) ions was best described by pseudo-second-order kinetics. Langmuir isotherm had a good fit with the experimental data with 0.97 of correlation coefficient (R2), and the maximum adsorption capacity obtained was 23.14 mg g-1 at 30 ºC. The results obtained from sorption thermodynamic studies suggested that the adsorption process is exothermic and spontaneous. SEM analysis showed tubular voids on the adsorbent. FTIR studies indicated the presence of functional groups like hydroxyl, –C-O, –C=O, and amide groups in the adsorbent, which can probably involve in metal ion adsorption. Therefore, dried bael flowers can be considered an effective low-cost adsorbent for treating Cu(II) ions.

Sign in / Sign up

Export Citation Format

Share Document