scholarly journals Uptake of Pb(II) ion From Aqueous Solution Using Silk Cotton Hull Carbon: An Agricultural Waste Biomass

2006 ◽  
Vol 3 (4) ◽  
pp. 218-229 ◽  
Author(s):  
R. Shanmugavalli ◽  
P. S. Syed Shabudeen ◽  
R. Venckatesh ◽  
K. Kadirvelu ◽  
S. Madhavakrishnan ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Metal Ion ◽  
Agricultural Waste ◽  
Raw Material ◽  
Ion Concentration ◽  
Isotherm Models ◽  
Agricultural Product ◽  
Waste Biomass ◽  
Adsorption Parameters

Activated carbon prepared from silk cotton hull (SCH) was used for the adsorptive removal of Pb(II) ion from aqueous solution. The raw material used for the preparation of activated carbon is the waste of agricultural product; the production of this carbon is expected to be economically feasible. Parameters such as agitation time, metal ion concentration, adsorbent dose,pH and Particle size were studied. Adsorption equilibrium was reached within 80 min for 10, 20, 30 and 40mg/l of Pb(II) ion with 50mg of carbon per mL of solution. Adsorption parameters were determined using both Langmuir and Freundlich isotherm models. The adsorption efficiency reached 100% for 20, 30 and 40mg/l of Pb(II) ion with 120, 140 and 150mg of carbon. Pb(II) ion removal increased as thepH increased from 2 to 5 and remains constant up topH 10. Desorption studies were also carried out with dilute hydrochloric acid to know the mechanism of adsorption. Quantitative desorption of Pb(II) ion from carbon indicates that adsorption of metal ion is by ion-exchange. Efficiency of the adsorption of SCH was also studied with Pb containing industrial wastewater by varyingpH and carbon concentration.

scholarly journals Utilization of Sago Waste as an Adsorbent for the Removal of Cu(II) Ion from Aqueous Solution

2008 ◽  
Vol 5 (2) ◽  
pp. 233-242 ◽  
Author(s):  
P. Maheswari ◽  
N. Venilamani ◽  
S. Madhavakrishnan ◽  
P. S. Syed Shabudeen ◽  
R. Venckatesh ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Metal Ion ◽  
Chemical Properties ◽  
Ion Concentration ◽  
Isotherm Models ◽  
Equilibrium Isotherm ◽  
Particle Size Range ◽  
Industry Waste ◽  
Sago Waste

The preparation of activated carbon (AC) from sago industry waste is a promising way to produce a useful adsorbent for Cu(II) removal, as well as dispose of sago industry waste. The AC was prepared using sago industry waste with H2SO4and (NH4)2S2O8and physico-chemical properties of AC were investigated. The specific surface area of the activated carbon was determined and its properties studied by scanning electron microscopy (SEM). Adsorptive removal of Cu(II) from aqueous solution onto AC prepared from sago industry waste has been studied under varying conditions of agitation time, metal ion concentration, adsorbent dose and pH to assess the kinetic and equilibrium parameters. Adsorption equilibrium was obtained in 60min for 20 to 50mg/L of Cu(II) concentrations. The Langmuir and Freundlich equilibrium isotherm models were found to provide an excellent fitting of the adsorption data. In Freundlich equilibrium isotherm, the RL values obtained were in the range of 0 to 1 (0.043 to 0.31) for Cu(II) concentration of 10 to 100mg/L, which indicates favorable adsorption of Cu(II) onto Sago waste carbon. The adsorption capacity of Cu(II) (Qo) obtained from the Langmuir equilibrium isotherm model was found to be 32.467 mg/g at pH 4 ± 0.2 for the particle size range of 125–250u. The percent removal increased with an increase in pH from 2 to 4. This adsorbent was found to be effective and economically attractive.

scholarly journals The biosorption potential of waste biomass young fruit walnuts for lead ions: Kinetic and equilibrium study

2016 ◽  
Vol 70 (3) ◽  
pp. 243-255
Author(s):  
Dragana Markovic ◽  
Danijela Bojic ◽  
Aleksandar Bojic ◽  
Goran Nikolic
Keyword(s):  
Aqueous Solution ◽  
Metal Ions ◽  
Metal Ion ◽  
Low Cost ◽  
Ion Concentration ◽  
Isotherm Models ◽  
Waste Biomass ◽  
Sorption Data ◽  
Biosorption Capacity ◽  
Young Fruit

The biosorption potential of waste biomass young fruit walnuts (YFW) as a low-cost biosorbent, processed from liqueur industry, for Pb(II) ions from aqueous solution was explored. The structural features of the biosorbent were characterized by FTIR spectroscopy, which indicates the possibility that the different functional groups may be responsible for the binding of Pb(II) ions from aqueous solution. The effects of relevant parameters such as pH (2 - 6), contact time (0 - 120 min), biosorbent dosage (2 - 20 g), initial metal ion concentration (10 - 120 mg dm-3), at a temperature of 25(C with stirring (120 rpm) and a constant ionic strength of 0,02 mol dm-3 were evaluated in batch experiments. The sorption equilibrium of Pb(II) ion (when 84 % of metal ions were sorbed at an initial concentration of 15 mg dm-3) was achieved within the pH range 4 - 5 after 50 min. Kinetic data were best described by the pseudo-second order model. Removal efficiency of Pb(II) ion rapidly increased with increasing biosorbent dose from 2.0 to 8.0 g per dm-3 of sorbate. Optimal biosorbent dose was set to 6.0 g per dm3 of sorbate. An increase in the initial metal concentration increases the biosorption capacity. The sorption data of investigated metal ion are fitted to Langmuir, Freundlich and Temkin isotherm models. The equilibrium data were well fitted by the Langmuir isotherm model (R2 ? 0.990). The maximum monolayer biosorption capacity of waste biomass YFW for Pb(II) ion, at 25.0 ? 0.5?C and pH 4.5, was found to be 19.23 mgg-1. This available waste biomass is efficient in the uptake of Pb(II) ions from aqueous solution and could be used as a low-cost and an alternative biosorbent for the treatment of wastewater streams bearing these metal ions.

scholarly journals Nano sized carbonized waste biomass for heavy metal ion remediation

2014 ◽  
Vol 16 (4) ◽  
pp. 6-13 ◽  
Author(s):  
Garima Mahajan ◽  
Dhiraj Sud
Keyword(s):  
Heavy Metal ◽  
Aqueous Solutions ◽  
Metal Ions ◽  
Contact Time ◽  
Metal Ion ◽  
Agricultural Waste ◽  
Ion Concentration ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Waste Biomass

Abstract Utilization of agricultural waste material with approach to enhance the heavy metal remediation properties by carbonizing the biomass at nano size particles has been explored in present investigation from aqueous solutions. In this study the lignocellulosic, nitrogenous agricultural waste biomass Delbergia sissoo pods (DSP) has been tried for sequestering of Cd (II), Pb (II) and Ni (II) metal ions from aqueous solutions. Batch experiments were performed for removal of targeted metal ions keeping in consideration the preliminary affecting parameters such as effect of adsorption dose, pH, initial metal ion concentration, stirring speed and contact time. The sorption studies were analyzed by using, Freundlic isotherm and Langmuir isotherm models. The kinetics of the process was evaluated by pseudo pseudo-first order and pseudo second order kinetic models. Studies reveal that the equilibrium was achieved with in 30 min of the contact time at optimized parameters. Analytical studies of biosorbent were done by means of FT-IR, SEM and XRD. Desorption experiments were carried out using HCl solution with a view to regenerate the spent adsorbent and to recover the adsorbed metal ions.

scholarly journals Ricinus CommunisPericarp Activated Carbon Used as an Adsorbent for the Removal of Ni(II) From Aqueous Solution

2008 ◽  
Vol 5 (4) ◽  
pp. 761-769 ◽  
Author(s):  
S. Madhavakrishnan ◽  
K. Manickavasagam ◽  
K. Rasappan ◽  
P. S. Syed Shabudeen ◽  
R. Venkatesh ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Particle Size ◽  
Activated Carbon ◽  
Contact Time ◽  
Metal Ion ◽  
Ricinus Communis ◽  
Ion Concentration ◽  
Batch Mode ◽  
Adsorption Data ◽  
Initial Ph

Activated carbon prepared from Ricinus communis Pericarp was used to remove Ni(II) from aqueous solution by adsorption. Batch mode adsorption experiments are carried out by varying contact time, metal-ion concentration, carbon concentration and pH to assess kinetic and equilibrium parameters. The adsorption data were modeled by using both Langmuir and Freundlich classical adsorption isotherms. The adsorption capacity (Qo) calculated from the Langmuir isotherm was 31.15 mg/g of activated carbon at initial pH of 5.0±0.2 for the particle size 125-250 µm.

scholarly journals Adsorption of Cr6+ Onto Unmodified and Hydrochloric Acid Modified African Nutmeg Pod (Monodora myristica) from Aqueous Solution

2019 ◽  
pp. 1-8
Author(s):  
F. U. Okwunodulu ◽  
H. O. Chukwuemeka-Okorie ◽  
N. M. Mgbemena ◽  
J. B. I. Kalu
Keyword(s):  
Aqueous Solution ◽  
Metal Ion ◽  
Correlation Coefficients ◽  
Freundlich Isotherm ◽  
Low Ph ◽  
Ion Concentration ◽  
Isotherm Models ◽  
Particle Sizes ◽  
Monodora Myristica ◽  
Best Fit

The removal of Cr6+ from aqueous solution using unmodified and hydrochloric modified African nutmeg pod was studied. The effects of particle size, pH and initial metal ions concentration adsorbed were investigated. The amount of metal ion adsorbed increased as the initial metal ion concentration increased and also decreased at low pH of 2 for both modified and unmodified African nutmeg pod.  400 µm and 250 µm were the optimum particle sizes for both modified and unmodified African nutmeg pod respectively, values given as 75.8 mg/g for the modified and 93.39 mg/g for the unmodified. Generally, it was observed that the unmodified African nutmeg pod showed greater adsorption capacity than the modified African nutmeg pod. The equilibrium experimental data were examined via Langmuir and Freundlich isotherm models.  Freundlich isotherm model gave the best fit for the data in both unmodified and modified African nutmeg pod based on the correlation coefficients (R2 values) gotten. The results of the study showed that the African nutmeg pod is efficient for the removal of Cr6+ from aqueous solutions especially when unmodified.

Thermodynamic and Kinetic Models for Removal of Thorium from Aqueous Solution

2017 ◽  
Vol 6 (1) ◽  
pp. 148-156
Author(s):  
P. Indhumathi ◽  
S. Sathiyaraj ◽  
U. S. Shoba ◽  
P. S. Syed Shabudeen ◽  
C. Jayabalakrishnan
Keyword(s):  
Aqueous Solution ◽  
Kinetic Models ◽  
Metal Ion ◽  
Adsorption Equilibrium ◽  
Cost Effective ◽  
Ion Concentration ◽  
Isotherm Models ◽  
Adsorptive Removal ◽  
Adsorption Data ◽  
Water And Wastewater

Adsorption is a unique process for the removal of pollutants from water and wastewater since the process is cost effective, easily adoptable and environmentally compatible. The micro algae are a promising way to produce a useful adsorbent for Thorium (VI) removal from aqueous solution. The specific surface area of the microalgae was determined and its properties studied by scanning electron microscopy (SEM). Adsorptive removal of Thorium (VI) from aqueous solution on micro algae has been studied under varying conditions of agitation time, metal ion concentration, adsorbent dose and pH to assess the kinetic and equilibrium parameters. Adsorption equilibrium was obtained in 120 min for 20 to 120 mg/L of Thorium (VI) concentrations. The Langmuir, Freundlich, Temkin, Redlich-Peterson isotherm models, kinetic models and thermodynamic models were found to provide an excellent fitting of the adsorption data. The adsorption capacity of thorium 91.73% maximum percent removal in thorium at pH 3. This adsorbent was found to be effective and economically attractive.

scholarly journals Optimization of multiple parameters for adsorption of arsenic (III) from aqueous solution using Psidium guajava leaf powder

2021 ◽  
Author(s):  
Uma Sankar Behera ◽  
Prakash Chandra Mishra ◽  
G. B. Radhika
Keyword(s):  
Aqueous Solution ◽  
Particle Size ◽  
Metal Ion ◽  
Psidium Guajava ◽  
Ion Concentration ◽  
Adsorption Parameters ◽  
Batch Mode ◽  
Equilibrium Study ◽  
Multiple Parameters ◽  
Desorption Study

Abstract The conventional method of water treatment using activated carbon from several sources has been focused extensively since the last two decades. However, rare attention has been noticed on natural adsorbents such as plant leaves. Therefore, the Psidium guajava (Guava) leaf has been investigated to understand it's adsorption efficacy for Arsenic (III) [As(III)] in this study. The effect of process variables, e.g., pH, concentration of metal ion, adsorbent's particle size, and dosages, are evaluated. Experiments are carried out in batch mode, and the individual and combined parameter's impact on adsorption have been discussed. Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) is used to characterize the adsorbent's surface. Freundlich and Langmuir's isotherms are used for adsorption equilibrium study. The adsorption parameters are optimized by establishing a regression correlation using central composite design (CCD) of response surface methodology (RSM). The analysis of variance (ANOVA) suggests a high regression coefficient (R2 = 0.9249) for the removal of As(III). Particle size of 0.39 mm; adsorbent's height of 10 cm; metal ion concentration of 30 ppm, and pH 6 are optimized to remove 90.88% As(III) from aqueous solution. HCl is evaluated as a potential solvent for desorption of arsenic from desorption study.

scholarly journals Utilization of Activated Carbon Prepared from Industrial Solid Waste for the Removal of Chromium(VI) Ions from Synthetic Solution and Industrial Effluent

2005 ◽  
Vol 23 (2) ◽  
pp. 145-160 ◽  
Author(s):  
N. Vennilamani ◽  
K. Kadirvelu ◽  
Y. Sameena ◽  
S. Pattabhi
Keyword(s):  
Activated Carbon ◽  
Metal Ion ◽  
Industrial Effluent ◽  
Carbon Adsorbent ◽  
Freundlich Isotherm ◽  
Ion Concentration ◽  
Isotherm Models ◽  
Adsorption Sites ◽  
Chromium Vi ◽  
Sago Waste

Activated carbon (AC) prepared from sago waste was characterized and used to remove chromium(VI) ions from aqueous solution and industrial effluent by adsorption methods using various conditions of agitation time, metal ion concentration, adsorbent dosage particle size and pH. Surface modification of the carbon adsorbent with a strong oxidizing agent like concentrated H2SO4 generates more active adsorption sites on the solid surface and pores for metal ion adsorption. Adsorption of the metal ion required a very short time and led to quantitative removal. Both the Langmuir and Freundlich isotherm models could describe the adsorption data. The calculated values of Q0 and b were 5.78 mg/g and 1.75 1/min, respectively. An effective adsorption capacity was noted for particle sizes in the range 125–250 μm at room temperature (30 ± 2°C) and an initial pH of 2.0 ± 0.2. The specific surface area of the activated carbon was determined and its properties studied by scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FT-IR). These studies revealed that AC prepared from sago waste is suitable for the removal of Cr(VI) ions from both synthetic and industrial effluents.

scholarly journals A comprehensive study on adsorption behavior of some azo dyes from aqueous solution onto different adsorbents

2017 ◽  
Vol 76 (2) ◽  
pp. 478-489 ◽  
Author(s):  
Nihan Kaya
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Azo Dyes ◽  
Binding Capacity ◽  
Agricultural Wastes ◽  
Walnut Shell ◽  
Isotherm Models ◽  
Adsorption Parameters ◽  
Dye Pollutants ◽  
Comprehensive Study

One of the major environmental problems is the existence of dye materials in water sources. This pollutant must be removed from water by appropriate methods. Although most of these methods are efficient for the treatment of waters contaminated with dye pollutants, they are very costly and commercially unattractive. Adsorption is one of the most popular methods for the removal of dye pollutants from water especially if the sorbent is inexpensive. Sorbents are classified as natural sorbents, commercial sorbents, and the sorbents obtained from industrial and agricultural wastes. Although commercial activated carbon is widely used in wastewater treatment applications, it is very expensive. In this study, usability of inexpensive materials – sepiolite as a natural adsorbent, and walnut shell and hazelnut shell as agricultural wastes – was investigated instead of commercial activated carbon to remove some azo dyes (methyl red, methyl orange and methyl yellow) from aqueous solution. Batch experiments were carried out to determine the effect of different adsorption parameters such as pH, initial dye concentration, contact time, adsorbent dose and temperature. The equilibrium of adsorptions was modeled using Langmuir and Freundlich isotherm models. This comprehensive study showed that these alternative adsorbents had sufficient binding capacity to remove these azo dyes from water.

scholarly journals Biosorption Studies for the Removal of Malachite Green from its Aqueous Solution by Activated Carbon Prepared from Cassava Peel

2011 ◽  
Vol 8 (s1) ◽  
pp. S61-S66 ◽  
Author(s):  
C. Parvathi ◽  
T. Maruthavanan ◽  
S. Sivamani ◽  
C. Prakash
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Malachite Green ◽  
Dye Removal ◽  
Agricultural Waste ◽  
Raw Material ◽  
Textile Effluent ◽  
Malachite Green Dye ◽  
Health Related ◽  
Cassava Peel

The association of dyes with health related problems is not a new phenomenon. The effectiveness of carbon adsorption for dye removal from textile effluent has made it an ideal alternative to other expensive treatment methods. The preparation of activated carbon from agricultural waste could increase economic return and reduce pollution. Cassava peel has been used as a raw material to produce activated carbon. The study investigates the removal of malachite green dye from its aqueous solution. The effects of condition such as adsorbent dosage, initial dye concentration, pH and contact time were studied. The adsorption capacity was demonstrated as a function of time for malachite green from aqueous solution by the prepared activated carbon. The results showed that as the amount of the adsorbent was increased, the percentage of dye removal increased accordingly. Higher adsorption percentages were observed at lower concentrations of malachite green dye. Silver nitrate treated cassava peel showed a better performance compared to Sulphuric acid treated and raw carbons, thus making it an interesting option for dye removal textile effluent.

Sign in / Sign up

Export Citation Format

Share Document