Dominant monohydride bonding in hydrogenated amorphous silicon thin films formed by plasma enhanced chemical vapor deposition at room temperature

1997 ◽  
Vol 15 (1) ◽  
pp. 77-84 ◽  
Author(s):  
Easwar Srinivasan ◽  
Daniel A. Lloyd ◽  
Gregory N. Parsons
Keyword(s):  
Thin Films ◽  
Chemical Vapor Deposition ◽  
Amorphous Silicon ◽  
Vapor Deposition ◽  
Room Temperature ◽  
Hydrogenated Amorphous Silicon ◽  
Chemical Vapor ◽  
Silicon Thin Films ◽  
Hydrogenated Amorphous

Effect of Ge Incorporation on Hydrogenated Amorphous Silicon Germanium Thin Films Prepared by Plasma Enhanced Chemical Vapor Deposition

2012 ◽  
Vol 569 ◽  
pp. 27-30
Author(s):  
Bao Jun Yan ◽  
Lei Zhao ◽  
Ben Ding Zhao ◽  
Jing Wei Chen ◽  
Hong Wei Diao ◽  
...  
Keyword(s):  
Thin Films ◽  
Chemical Vapor Deposition ◽  
Amorphous Silicon ◽  
Vapor Deposition ◽  
Silicon Germanium ◽  
Hydrogenated Amorphous Silicon ◽  
Chemical Vapor ◽  
Dark Conductivity ◽  
Amorphous Silicon Germanium ◽  
Hydrogenated Amorphous

Hydrogenated amorphous silicon germanium thin films (a-SiGe:H) were prepared via plasma enhanced chemical vapor deposition (PECVD). By adjusting the flow rate of GeH4, a-SiGe:H thin films with narrow bandgap (Eg) were fabricated with high Ge incorporation. It was found that although narrow Eg was obtained, high Ge incorporation resulted in a great reduction of the thin film photosensitivity. This degradation was attributed to the increase of polysilane-(SiH2)n, which indicated a loose and disordered microstructure, in the films by systematically investigating the optical, optoelectronic and microstructure properties of the prepared a-SiGe:H thin films via transmission, photo/dark conductivity, Raman spectroscopy, and Fourier transform infrared spectroscopy (FTIR) measurements. Such investigation provided a helpful guide for further preparing narrow Eg a-SiGe:H materials with good optoelectronic properties.

Light-Induced Increase in Two-Level Tunneling States in Hydrogenated Amorphous Silicon

1999 ◽  
Vol 557 ◽  
Author(s):  
Xiao Liu ◽  
R.O. Pohl ◽  
R.S. Crandall
Keyword(s):  
Chemical Vapor Deposition ◽  
Low Temperature ◽  
Internal Friction ◽  
Amorphous Silicon ◽  
Vapor Deposition ◽  
Room Temperature ◽  
Hydrogenated Amorphous Silicon ◽  
Chemical Vapor ◽  
Hot Wire ◽  
Hydrogenated Amorphous

AbstractWe observe an increase of the low-temperature internal friction of hydrogenated amorphous silicon prepared by both hot-wire and plasma-enhanced chemical-vapor deposition after extended light-soaking at room temperature. This increase, and the associated change in sound velocity, can be explained by an increase of the density of two-level tunneling states, which serves as a measure of the lattice disorder. The amount of increase in internal friction is remarkably similar in both types of films although the amount and the microstructure of hydrogen are very different. Experiments conducted on a sample prepared by hot-wire chemical-vapor deposition show that this change anneals out gradually at room temperature in about 70 days. Possible relation of the light-induced changes in the low-temperature elastic properties to the Staebler-Wronski effect is discussed.

Luminescence Quenching in Erbium-Doped Hydrogenated Amorphous Silicon

1996 ◽  
Vol 422 ◽  
Author(s):  
A. Polman ◽  
Jung H. Shin ◽  
R. Serna ◽  
G. N. Van Den Hovenb ◽  
W. G. J. H. M. van Sark ◽  
...  
Keyword(s):  
Chemical Vapor Deposition ◽  
Amorphous Silicon ◽  
Vapor Deposition ◽  
Amorphous Materials ◽  
Radiative Decay ◽  
Hydrogenated Amorphous Silicon ◽  
Chemical Vapor ◽  
Silicon Thin Films ◽  
Excitation Model ◽  
Hydrogenated Amorphous

AbstractHydrogenated amorphous silicon thin films, co-doped with oxygen, are made using lowpressure chemical vapor deposition (LPCVD) or plasma-enhanced chemical vapor deposition (PECVD). The films are implanted with Er to a peak concentration of 0.2 at.%. Roomtemperature photoluminescence at 1.54 μm is observed in both amorphous materials, after thermal annealing at 300–400 °C. The PECVD films with low 0 content (0.3, 1.3 at.%) show a luminescence intensity quenching by a factor 7–15 as the temperature is raised from 10 K to room temperature. The quenching is well correlated with a decrease in luminescence lifetime, indicating that non-radiative decay of excited Er3+ is the dominant quenching mechanism as the temperature is increased. In the LPCVD films, with 31 at.% 0, the quenching is only a factor 3, and no lifetime quenching is observed. The results are interpreted in the context of an impurity Auger excitation model, taking into account the fact that oxygen modifies the Si bandgap and the Er-related defect levels in the gap.

Sign in / Sign up

Export Citation Format

Share Document