MECHANICAL AND MORPHOLOGICAL PROPERTIES OF POLYAMIDE 12 COMPOSITE FOR POTENTIAL BIOMEDICAL IMPLANT: INJECTION MOLDING AND DESKTOP 3D PRINTER

2015 ◽  
Vol 76 (7) ◽  
Author(s):  
Tuan Noraihan Azila Tuan Rahim ◽  
Hazizan Md Akil ◽  
Abdul Manaf Abdullah ◽  
Dasmawati Mohamad ◽  
Zainul Ahmad Rajion
Keyword(s):  
Mechanical Properties ◽  
Injection Molding ◽  
Morphological Properties ◽  
3D Printer ◽  
Fused Filament Fabrication ◽  
Manufacturing Method ◽  
Biomedical Implant ◽  
Polyamide 12 ◽  
Molded Parts ◽  
Injection Molded

Fused filament fabrication is a filament based rapid prototyping process, which offers the possibility of new polymer material for invention of biomedical implant. This study represents an investigation on a preparation and characterization of new polyamide 12 reinforced with 20 wt% of zirconium dioxide and hydroxyapatite by desktop 3D printer in comparison with conventional manufacturing method, injection molding. Polyamide 12 composite was compounded, pelletized and filament-extruded prior to apply to a 3D printer. Sample prototypes from the new polyamide composite have been successfully made and tested. Mechanical (flexural and impact) and morphological properties were evaluated and compared. From the results, the printed polyamide composite exhibited lower mechanical properties than injection molded due to the formation of porosity, laminate weakness and low pressure during printing. Although the mechanical properties of printed parts were lower than molded parts, but the capability of 3D printer to fabricate any customized 3D object could lead to the bright future and great contribution in this area, while at the same time many improvements can be made for the future works.

An Experimental Investigation of a Micro Injection Molded Mechanical Device

2005 ◽  
Author(s):  
Alan M. Tom ◽  
Aleksandar K. Angelov ◽  
John P. Coulter
Keyword(s):  
Mechanical Properties ◽  
Experimental Investigation ◽  
Injection Molding ◽  
Processing Parameters ◽  
Primary Objective ◽  
Crystalline Materials ◽  
Reduced Modulus ◽  
Molded Parts ◽  
Secondary Objective ◽  
Injection Molded

The primary objective of this study, through a scientific experimental investigation, was to determine optimum injection molding processing parameters on semi-crystalline materials HDPE and POM focusing on mechanical properties, obtained thru the use of a nano-indenter, of micro gears being manufactured on non-heated and heated mold bases. A secondary objective was to initiate a similar experimental study using amorphous COC material. Taguchi’s method utilizing an L-9 orthogonal array was used to determine the effects of Tnoz, Tmold, Pinj, Vinj, Ppack, and tpack injection molding processing parameters. A nano-indenter was used to determine investigated mechanical properties on final injection molded parts that included stiffness (S), reduced modulus (Er), and hardness (H). Results showed HDPE, POM and COC, heated mold experiments exhibiting increases in mechanical properties S, Er, and H, on the order of 1.2–4.0 times those of non-heated molding trials. Decreases in optimum molding conditions for Tnoz, Pinj, and Ppack was also observed for heated molding trials. The highest mold temperatures and injection pressures tested did not produce greatest optimum molding conditions. However, largest packing times tested produced optimum molding conditions.

Correlation Between Mechanical Properties in Standard Test Specimens and Injection Molded Thin-Wall Parts

2013 ◽  
Author(s):  
Laurentiu I. Sandu ◽  
Felicia Stan ◽  
Catalin Fetecau
Keyword(s):  
Mechanical Properties ◽  
Elastic Modulus ◽  
Yield Strength ◽  
Injection Molding ◽  
Process Conditions ◽  
Thin Wall ◽  
Optimal Process ◽  
Melt Temperature ◽  
Molded Parts ◽  
Injection Molded

In this paper, we investigated the effect of injection molding parameters on the mechanical properties of thin-wall injection molded parts. A four-factor (melt temperature, mold temperature, injection speed and packing pressure) and three-level fractional experimental design was performed to investigate the influence of each factor on the mechanical properties and determine the optimal process conditions that maximize the mechanical properties of the part using the signal-to-noise (S/N) ratio response. The mechanical properties (e.g., elastic modulus, yield strength and strain at break) were measured by tensile tests at room temperature, at a crosshead speed of 5 mm/min, and compared with those of the injection-molded specimens. The experimental results showed that the tensile properties were highly dependent on the injection molding parameters, regardless of the type of the specimens. The values of Young modulus and yield strength of the injection-molded specimens were lower than those of the injection-molded parts, while the elongation at break was considerably lower for the injection-molded parts. The optimal process conditions were strongly dependent on the measured performance quantities (elastic modulus, yield strength and strain at break).

Experimental Study on the Warpage and Tensile Strength of Additively Manufactured Semi-Crystalline Polyamide 6

2019 ◽  
Author(s):  
Konstantin Struebig ◽  
Andreas Schröffer ◽  
Tim C. Lueth
Keyword(s):  
Mechanical Properties ◽  
Experimental Study ◽  
Tensile Tests ◽  
Polyamide 6 ◽  
High Tendency ◽  
Manufacturing Method ◽  
Crystalline Polymers ◽  
Basic Model ◽  
Molded Parts ◽  
Injection Molded

Abstract Semi-crystalline polymers offer great mechanical properties and are ubiquitously found in everyday life. Despite of this, they are not yet widespread among additive manufacturing processes, due to their high tendency to warp. This leads to unstable build processes and dimensionally inaccurate parts, which greatly reduces their usability. This paper describes the findings of an experimental study designed to identify relevant parameters that affect the warpage and investigate the influence of the manufacturing method on the mechanical properties of semi-crystalline PA6. The first experiment investigates the effect of water absorption over time, measuring weight and curling of 64 specimens over three weeks. The second part of this study focuses on the changes in geometry caused by the warpage by evaluating a basic model for simple part geometries. At last, a tension test was conducted and the results were compared to injection molded parts of the same material. The results indicate, that while the absorption of water plays an important role in the warpage of hydrophilic polymers like PA6, other environmental factors also have a significant influence. The model evaluation showed, that the warpage geometry of the tested parts can be approximated with only three parameters for very simple parts, if there are no irregularities in the manufacturing process. The tensile tests revealed, that the additively manufactured specimens reach up to 85.9% of the strength of the injection molded reference parts, most likely due to imperfect filling and reduced density. Overall, this study provides an insight into the challenges of additively manufacturing semi-crystalline polymers and the potential of PA6 as a tougher alternative to the common materials.

scholarly journals Polyamide 12/Multiwalled Carbon Nanotube and Carbon Black Nanocomposites Manufactured by 3D Printing Fused Filament Fabrication: A Comparison of the Electrical, Thermoelectric, and Mechanical Properties

2021 ◽  
Vol 7 (2) ◽  
pp. 38
Author(s):  
Nectarios Vidakis ◽  
Markos Petousis ◽  
Lazaros Tzounis ◽  
Emmanuel Velidakis ◽  
Nikolaos Mountakis ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
3D Printing ◽  
Carbon Black ◽  
Large Scale ◽  
Fracture Mechanisms ◽  
Fused Filament Fabrication ◽  
Melt Mixing ◽  
Multiwalled Carbon ◽  
Electrically Conductive ◽  
Polyamide 12

In this study, nanocomposites with polyamide 12 (PA12) as the polymer matrix and multiwalled carbon nanotubes (MWCNTs) and carbon black (CB) at different loadings (2.5, 5.0, and 10.0 wt.%) as fillers, were produced in 3D printing filament form by melt mixing extrusion process. The filament was then used to build specimens with the fused filament fabrication (FFF) three-dimensional (3D) printing process. The aim was to produce by FFF 3D printing, electrically conductive and thermoelectric functional specimens with enhanced mechanical properties. All nanocomposites’ samples were electrically conductive at filler loadings above the electrical percolation threshold. The highest thermoelectric performance was obtained for the PA12/CNT nanocomposite at 10.0 wt.%. The static tensile and flexural mechanical properties, as well as the Charpy’s impact and Vickers microhardness, were determined. The highest improvement in mechanical properties was observed for the PA12/CNT nanocomposites at 5.0 wt.% filler loading. The fracture mechanisms were identified by fractographic analyses of scanning electron microscopy (SEM) images acquired from fractured surfaces of tensile tested specimens. The nanocomposites produced could find a variety of applications such as; 3D-printed organic thermoelectric materials for plausible large-scale thermal energy harvesting applications, resistors for flexible circuitry, and piezoresistive sensors for strain sensing.

scholarly journals Post-Processing Time Dependence of Shrinkage and Mechanical Properties of Injection-Molded Polypropylene

Materials ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 22
Author(s):  
Artur Kościuszko ◽  
Dawid Marciniak ◽  
Dariusz Sykutera
Keyword(s):  
Mechanical Properties ◽  
Impact Strength ◽  
Injection Molding ◽  
Accelerated Aging ◽  
Mold Temperature ◽  
Degree Of Crystallinity ◽  
Injection Mold ◽  
Secondary Crystallization ◽  
Scanning Calorimetry ◽  
Injection Molded

Dimensions of the injection-molded semi-crystalline materials (polymeric products) decrease with the time that elapses from their formation. The post-molding shrinkage is an effect of secondary crystallization; the increase in the degree of polymer crystallinity leads to an increase in stiffness and decrease in impact strength of the polymer material. The aim of this study was to assess the changes in the values of post-molding shrinkage of polypropylene produced by injection molding at two different temperatures of the mold (20 °C and 80 °C), and conditioned for 504 h at 23 °C. Subsequently, the samples were annealed for 24 h at 140 °C in order to conduct their accelerated aging. The results of shrinkage tests were related to the changes of mechanical properties that accompany the secondary crystallization. The degree of crystallinity of the conditioned samples was determined by means of density measurements and differential scanning calorimetry. It was found that the changes in the length of the moldings that took place after removal from the injection mold were accompanied by an increase of 20% in the modulus of elasticity, regardless of the conditions under which the samples were made. The differences in the shrinkage and mechanical properties of the samples resulting from mold temperature, as determined by tensile test, were removed by annealing. However, the samples made at two different injection mold temperature values still significantly differed in impact strength, the values of which were clearly higher for the annealed samples compared to the results determined for the samples immediately after the injection molding.

Effects of Sintering Variables on the Physical and Mechanical Properties of Metal Injection Molding Molded 17-4 PH Stainless Steel

2021 ◽  
Vol 1028 ◽  
pp. 403-408
Author(s):  
Apang Djafar Shieddieque ◽  
Shinta Virdhian ◽  
Moch Iqbal Zaelana Muttahar ◽  
Muhammad Rafi Muttaqin
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Injection Molding ◽  
Relative Density ◽  
Physical And Mechanical Properties ◽  
High Hardness ◽  
Argon Atmosphere ◽  
Metal Injection Molding ◽  
Manufacturing Method ◽  
Small Complex

Metal injection molding (MIM) is a near net shape manufacturing technique for producing small, complex, precision parts in mass production. MIM process is manufacturing method that combines traditional shape-making capability of plastic injection molding and the materials flexibility of powder metallurgy. The process consists of the following four steps: mixing of metal powder and binder, injection molding to shape the component, debinding to remove the binder in the component, sintering to consolidate the debound parts. In this research, the physical and mechanical properties of metal injection molded 17-4 PH stainless steel were investigated with the variation of sintering temperatures (1300 °C - 1360 °C) and atmosphere conditions (argon and vacuum conditions). The relative density, microstructure, distortion, and hardness are measured and analyzed in this study. The results show that highest relative density of 87%, relative homogeneous shrinkage and high hardness are achieved by sintering at 1360 °C for 1.5 hours and argon atmosphere. At the same sintering temperature and time, sintering in vacuum shows lower relative density (81%) than that in argon condition due to pores growth. The pore growths were not observed in the argon atmosphere. It can be concluded that sintering stages more rapidly under vacuum condition. The hardness measurements result also showed that high hardness is obtained by high density parts. The optimum average hardness obtained in this study is 239 HV. However, the hardness properties results are still lower than 280 HV according to MPIF Standard 35 for MIM parts.

Mechanical Properties of Injection Molded Rubber Testing Samples

2015 ◽  
Vol 752-753 ◽  
pp. 308-311
Author(s):  
Adam Skrobak ◽  
Michal Stanek ◽  
David Manas ◽  
Martin Ovsik ◽  
Vojtech Senkerik ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Injection Molding ◽  
Standardized Testing ◽  
Rubber Compound ◽  
Testing Sample ◽  
Synthetic Rubber ◽  
Injection Molded

The aim of this article is to demonstrate and asses to what extent there is an impact on the mechanical properties of a standardized testing sample made of rubber compound based on synthetic rubber EPDM and produced by injection molding in comparison with a sample produced by classic preparation (cutting off a compression molded plate) according to the standard ISO 23529.

scholarly journals Effects of Injection Molding Screw Tips on Polymer Mixing

2018 ◽  
Vol 62 (3) ◽  
pp. 241-246 ◽  
Author(s):  
Dániel Török ◽  
József Gábor Kovács
Keyword(s):  
Injection Molding ◽  
Processing Parameters ◽  
Raw Material ◽  
Molding Machine ◽  
Surface Color ◽  
Melt Temperature ◽  
Injection Molding Machine ◽  
Aesthetic Appearance ◽  
Molded Parts ◽  
Injection Molded

In all fields of industry it is important to produce parts with good quality. Injection molded parts usually have to meet strict requirements technically and aesthetically. The aim of the measurements presented in our paper is to investigate the aesthetic appearance, such as surface color homogeneity, of injection molded parts. It depends on several factors, the raw material, the colorants, the injection molding machine and the processing parameters. In this project we investigated the effects of the injection molding machine on surface color homogeneity. We focused on injection molding screw tips and investigated five screw tips with different geometries. We produced flat specimens colored with a masterbatch and investigated color homogeneity. To evaluate the color homogeneity of the specimens, we used digital image analysis software developed by us. After that we measured the plastication rate and the melt temperature of the polymer melt because mixing depends on these factors. Our results showed that the screw tips (dynamic mixers) can improve surface color homogeneity but they cause an increase in melt temperature and a decrease in the plastication rate.

Microstructure, Hardness, and Wear Resistance of Powder-Injection-Molded Products of Fe-Based Metamorphic Powders

2007 ◽  
Vol 26-28 ◽  
pp. 355-358
Author(s):  
Chang Kyu Kim ◽  
Chang Young Son ◽  
Dae Jin Ha ◽  
Tae Sik Yoon ◽  
Sung Hak Lee
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Wear Resistance ◽  
Injection Molding ◽  
Powder Injection Molding ◽  
Powder Injection ◽  
Thermally Stable ◽  
Austenitic Matrix ◽  
Amorphous Phases ◽  
Injection Molded

Powder injection molding (PIM) process was applied to Fe-based metamorphic alloy powders, and microstructure, hardness, and wear resistance of the PIM products were analyzed and compared with those of conventional PIM stainless steel products. When Fe-based metamorphic powders were injection-molded and then sintered at 1200 oC, completely densified products with almost no pores were obtained. They contained 34 vol.% of (Cr,Fe)2B borides dispersed in the austenitic matrix without amorphous phases. Since these (Cr,Fe)2B borides were very hard and thermally stable, hardness, and wear resistance of the PIM products of Fe-based metamorphic powders were twice as high as those of conventional PIM stainless steel products. Such property improvement suggested new applicability of the PIM products of Fe-based metamorphic powders to structures and parts requiring excellent mechanical properties.

Sign in / Sign up

Export Citation Format

Share Document