Development of wafer level underfill materials and assembly processes for fine pitch Pb-free solder flip chip packaging

2011 ◽  
Author(s):  
Jae-Woong Nah ◽  
Michael A. Gaynes ◽  
Claudius Feger ◽  
Satoru Katsurayama ◽  
Hiroshi Suzuki
Keyword(s):  
Flip Chip ◽  
Wafer Level ◽  
Fine Pitch ◽  
Flip Chip Packaging ◽  
Free Solder

Control of Bump Morphology in Lead Free Solder Plating for Higher Density Packaging

2014 ◽  
Vol 2014 (DPC) ◽  
pp. 001643-001669
Author(s):  
Koji Tatsumi ◽  
Kyouhei Mineo ◽  
Takeshi Hatta ◽  
Takuma Katase ◽  
Masayuki Ishikawa ◽  
...  
Keyword(s):  
High Speed ◽  
Flip Chip ◽  
New Technologies ◽  
Short Circuit ◽  
Lead Free Solder ◽  
Cu Pillar ◽  
Fine Pitch ◽  
Different Shapes ◽  
Free Solder ◽  
High Density Packaging

Solder bumping is one of the key technologies for flip chip connection. Flip chip connection has been moving forward to its further downsizing and higher integration with new technologies, such as Cu pillar, micro bump and Through Silicon Via (TSV). Unlike some methods like solder printing and ball mounting, electroplating is a very promising technology for upcoming finer bump formation. We have been developing SnAg plating chemical while taking technology progress and customers' needs into consideration at the same time. Today, we see more variety of requests including for high speed plating to increase the productivity and also for high density packaging such as narrowing the bump pitch itself and downsizing of the bump diameter. To meet these technical needs, some adjustments of plating chemical will be necessary. This time we developed new plating chemicals to correspond to bump miniaturization. For instance, our new SnAg chemical can control bump morphology while maintaining the high deposition speed. With our new plating chemicals, we can deposit mushroom bumps that grow vertically against the resist surface, also this new chemicals work effectively to prevent short-circuit between mushroom bumps with fine pitch from forming. In addition, we succeeded in developing high speed Cu pillar plating chemicals that can control the surface morphology to create different shapes. We'd like to present our updates on controlling bump morphology for various applications.

Cost Comparison of Fan-out Wafer Level Packaging and Flip Chip Packaging

2017 ◽  
Vol 2017 (DPC) ◽  
pp. 1-37 ◽  
Author(s):  
Amy Lujan
Keyword(s):  
Flip Chip ◽  
Cost Effective ◽  
Cost Comparison ◽  
Cost Modeling ◽  
Wafer Level ◽  
Design Features ◽  
Wafer Level Packaging ◽  
Flip Chip Packaging ◽  
The Right ◽  
The Cost

In recent years, there has been increased focus on fan-out wafer level packaging with the growing inclusion of a variety of fan-out wafer level packages in mobile products. While fan-out wafer level packaging may be the right solution for many designs, it is not always the lowest cost solution. The right packaging choice is the packaging technology that meets design requirements at the lowest cost. Flip chip packaging, a more mature technology, continues to be an alternative to fan-out wafer level packaging. It is important for many in the electronic packaging industry to be able to determine whether flip chip or fan-out wafer level packaging is the most cost-effective option. This paper will compare the cost of flip chip and fan-out wafer level packaging across a variety of designs. Additionally, the process flows for each technology will be introduced and the cost drivers highlighted. A variety of package sizes, die sizes, and design features will be covered by the cost comparison. Yield is a key component of cost and will also be considered in the analysis. Activity based cost modeling will be used for this analysis. With this type of cost modeling, a process flow is divided into a series of activities, and the total cost of each activity is accumulated. The cost of each activity is determined by analyzing the following attributes: time required, labor required, material required (consumable and permanent), capital required, and yield loss. The goal of this cost comparison is to determine which design features drive a design to be packaged more cost-effectively as a flip chip package, and which design features result in a lower cost fan-out wafer level package.

Thermally Activated Bumping Process using Sn3.0Ag0.5Cu Solder Powder for Low-Cost Interposers

2013 ◽  
Vol 2013 (1) ◽  
pp. 000420-000423
Author(s):  
Kwang-Seong Choi ◽  
Ho-Eun Bae ◽  
Haksun Lee ◽  
Hyun-Cheol Bae ◽  
Yong-Sung Eom
Keyword(s):  
Screen Printing ◽  
Flip Chip ◽  
Solder Bump ◽  
Low Cost ◽  
Organic Substrate ◽  
Lead Free ◽  
Lead Free Solder ◽  
Thermally Activated ◽  
Fine Pitch ◽  
Free Solder

A novel bumping process using solder bump maker (SBM) is developed for fine-pitch flip chip bonding. It features maskless screen printing process with the result that a fine-pitch, low-cost, and lead-free solder-on-pad (SoP) technology can be easily implemented. The process includes two main steps: one is the thermally activated aggregation of solder powder on the metal pads on a substrate and the other is the reflow of the deposited powder on the pads. Only a small quantity of solder powder adjacent to the pads can join the first step, so a quite uniform SoP array on the substrate can be easily obtained regardless of the pad configurations. Through this process, an SoP array on an organic substrate with a pitch of 130 μm is, successfully, formed.

Wafer Level Assembly Technique Development for Fine Pitch Flip Chip 3D Die-to-Wafer Integration

2010 ◽  
Vol 2010 (1) ◽  
pp. 000548-000553
Author(s):  
Zhaozhi Li ◽  
Brian J. Lewis ◽  
Paul N. Houston ◽  
Daniel F. Baldwin ◽  
Eugene A. Stout ◽  
...  
Keyword(s):  
Flip Chip ◽  
Low Cost ◽  
Three Dimensional ◽  
Cost Effective ◽  
Market Demand ◽  
Wafer Level ◽  
Packaging Technology ◽  
Fine Pitch ◽  
3D Packaging ◽  
Assembly Technique

Three Dimensional (3D) Packaging has become an industry obsession as the market demand continues to grow toward higher packaging densities and smaller form factor. In the meanwhile, the 3D die-to-wafer (D2W) packaging structure is gaining popularity due to its high manufacturing throughput and low cost per package. In this paper, the development of the assembly process for a 3D die-to-wafer packaging technology, that leverages the wafer level assembly technique and flip chip process, is introduced. Research efforts were focused on the high-density flip chip wafer level assembly techniques, as well as the challenges, innovations and solutions associated with this type of 3D packaging technology. Processing challenges and innovations addressed include flip chip fluxing methods for very fine-pitch and small bump sizes; wafer level flip chip assembly program creation and yield improvements; and set up of the Pb-free reflow profile for the assembled wafer. 100% yield was achieved on the test vehicle wafer that has totally 1,876 flip chip dies assembled on it. This work has demonstrated that the flip chip 3D die-to-wafer packaging architecture can be processed with robust yield and high manufacturing throughput, and thus to be a cost effective, rapid time to market alternative to emerging 3D wafer level integration methodologies.

Wafer Level Solder Bumping and Flip Chip Assembly with Solder Balls Down to 30μm

2011 ◽  
Vol 2011 (1) ◽  
pp. 000953-000960 ◽  
Author(s):  
Thomas Oppert ◽  
Rainer Dohle ◽  
Jörg Franke ◽  
Stefan Härter
Keyword(s):  
Solder Ball ◽  
Flip Chip ◽  
Temperature Cycling ◽  
Solder Paste ◽  
Wafer Level ◽  
Solder Alloys ◽  
Flip Chips ◽  
Fine Pitch ◽  
Solder Bumps ◽  
Cost Efficient

The most important technology driver in the electronics industry is miniaturization mainly driven by size reduction on wafer level and cost. One of the interconnection technologies for fine pitch applications with the potential for highest integration and cost savings is Flip Chip technology. The commonly used method of generating fine pitch solder bumps is by electroplating the solder. This process is difficult to control or even impossible if it comes to ternary or quaternary alloys. The work described in this study addresses the limitations of existing bumping technologies by enabling low-cost, fine pitch bumping and the use of a very large variety of solder alloys. This flexibility in the selection of the solder materials and UBM stacks is a large advantage if it is essential to improve temperature cycling resistance, drop test resistance, or to increase electromigration lifetime. The technology allows rapid changeover between different low melting solder alloys. Tighter bump pitches and a better bump quality (no flux entrapment) are achievable than with screen printing of solder paste. Because no solder material is wasted, the material costs for precious metal alloys like Au80Sn20 are much lower than with other bumping processes. Solder bumps with a diameter between to date 30 μm and 500 μm as well as small and large batches can be manufactured with one cost efficient process. To explore this potential, cost-efficient solder bumping and automated assembly technologies for the processing of Flip Chips have been developed and qualified. Flip Chips used in this study are 10 mm by 10 mm in size, have a pitch of 100 μm and a solder ball diameter of 30 μm, 40 μm or 50μm, respectively. Wafer level solder application has been done using wafer level solder sphere transfer process or solder sphere jetting technology, respectively. The latter tool has been used for many years in the wafer level packaging industry for both Flip Chip and chip scale packaging applications. It is commonly known in the industry as a solder ball bumping equipment. For the described work the process was scaled down for processing solder spheres with a diameter of 30 μm what was never done before that way worldwide. The research has shown that the underfill process is one of the most crucial factors when it comes to Flip Chip miniaturization for high reliability applications. Therefore, high performance underfill material was qualified initially [1]. Final long term reliability testing has been done according to MIL-STD883G, method 1010.8, condition B up to thirteen thousand cycles with excellent performance of the highly miniaturized solder joints. SEM/EDX and other analysis techniques will be presented. Additionally, an analysis of the failure mechanism will be given and recommendations for key applications and further miniaturization will be outlined.

Sign in / Sign up

Export Citation Format

Share Document