State-of-charge (SOC) estimation based on a reduced order electrochemical thermal model and extended Kalman filter

Author(s):  
Xueyan Li ◽  
Song-Yul Choe
2018 ◽  
Vol 8 (11) ◽  
pp. 2028 ◽  
Author(s):  
Xin Lai ◽  
Dongdong Qiao ◽  
Yuejiu Zheng ◽  
Long Zhou

The popular and widely reported lithium-ion battery model is the equivalent circuit model (ECM). The suitable ECM structure and matched model parameters are equally important for the state-of-charge (SOC) estimation algorithm. This paper focuses on high-accuracy models and the estimation algorithm with high robustness and accuracy in practical application. Firstly, five ECMs and five parameter identification approaches are compared under the New European Driving Cycle (NEDC) working condition in the whole SOC area, and the most appropriate model structure and its parameters are determined to improve model accuracy. Based on this, a multi-model and multi-algorithm (MM-MA) method, considering the SOC distribution area, is proposed. The experimental results show that this method can effectively improve the model accuracy. Secondly, a fuzzy fusion SOC estimation algorithm, based on the extended Kalman filter (EKF) and ampere-hour counting (AH) method, is proposed. The fuzzy fusion algorithm takes advantage of the advantages of EKF, and AH avoids the weaknesses. Six case studies show that the SOC estimation result can hold the satisfactory accuracy even when large sensor and model errors exist.


Electronics ◽  
2018 ◽  
Vol 7 (11) ◽  
pp. 321 ◽  
Author(s):  
Xin Lai ◽  
Wei Yi ◽  
Yuejiu Zheng ◽  
Long Zhou

In this paper, a novel model parameter identification method and a state-of-charge (SOC) estimator for lithium-ion batteries (LIBs) are proposed to improve the global accuracy of SOC estimation in the all SOC range (0–100%). Firstly, a subregion optimization method based on particle swarm optimization is developed to find the optimal model parameters of LIBs in each subregion, and the optimal number of subregions is investigated from the perspective of accuracy and computation time. Then, to solve the problem of a low accuracy of SOC estimation caused by large model error in the low SOC range, an improved extended Kalman filter (IEKF) algorithm with variable noise covariance is proposed. Finally, the effectiveness of the proposed methods are verified by experiments on two kinds of batteries under three working cycles, and case studies show that the proposed IEKF has better accuracy and robustness than the traditional extended Kalman filter (EKF) in the all SOC range.


Author(s):  
Maamar Souaihia ◽  
Bachir Belmadani ◽  
Rachid Taleb ◽  
Kamel Tounsi

This paper focuses on the state of charge estimation (SOC) for battery Li-ion. By modeling a battery based on the equivalent circuit model, the extended Kalman filter approach can be applied to estimate the battery SOC. An electrical battery model is developed in Matlab, Where the structure of the model is detailed by equations and blocks. The battery model has been validated from the experiment results. The comparison shows a good agreement in predicting the voltage, SOC estimation and the model performs better in SOC estimation.


Author(s):  
Wu Xiaogang ◽  
Xuefeng Li ◽  
Nikolay I. Shurov ◽  
Alexander A. Shtang ◽  
Michael V. Yaroslavtsev ◽  
...  

As the core component of electric vehicle, lithium-ion battery needs to adopt effective battery management method to prolong battery life and improve the reliability and safety. The accurate estimation of the battery SOC can be used to prevent the battery over charge and over discharge, reduce damage to the battery and improve battery performance, which plays a vital role in the battery management system. The study of battery SOC estimation mainly focused on the battery model construction and SOC estimation algorithm. Aiming at the problem that the state of charge (SOC) of electric vehicle is difficult to be accurately estimated under complex operating conditions, based on the parameter identification of the equivalent circuit of a ternary polymer lithium-ion battery, an Extended Kalman Filter (EKF) algorithm was used to estimate the SOC of the ternary polymer lithium-ion battery. Simulation and experimental results show that the estimation of SOC can be carried out by using the EKF algorithm under the conditions of China Passenger Car Condition (Chinacar) and new European driving cycle (NEDC) Compared with the coulomb counting method, the average error of SOC estimation can be realized is 1.042% and 1.138% respectively, the maximum error within 4%. Application of this algorithm to achieve SOC estimation has good robustness and convergence


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Shichun Yang ◽  
Sida Zhou ◽  
Yang Hua ◽  
Xinan Zhou ◽  
Xinhua Liu ◽  
...  

AbstractAn accurate state of charge (SOC) estimation in battery management systems (BMS) is of crucial importance to guarantee the safe and effective operation of automotive batteries. However, the BMS consistently suffers from inaccuracy of SOC estimation. Herein, we propose a SOC estimation approach with both high accuracy and robustness based on an improved extended Kalman filter (IEKF). An equivalent circuit model is established, and the simulated annealing-particle swarm optimization (SA-PSO) algorithm is used for offline parameter identification. Furthermore, improvements have been made with noise adaptation, a fading filter and a linear-nonlinear filtering based on the traditional EKF method, and rigorous mathematical proof has been carried out accordingly. To deal with model mismatch, online parameter identification is achieved by a dual Kalman filter. Finally, various experiments are performed to validate the proposed IEKF. Experimental results show that the IEKF algorithm can reduce the error to 2.94% under dynamic stress test conditions, and robustness analysis is verified with noise interference, hence demonstrating its practicability for extending to state estimation of battery packs applied in real-world operating conditions.


Energies ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 349
Author(s):  
Donghoon Shin ◽  
Beomjin Yoon ◽  
Seungryeol Yoo

Many battery state of charge (SOC) estimation methods have been studied for decades; however, it is still difficult to precisely estimate SOC because it is nonlinear and affected by many factors, including the battery state and charge–discharge conditions. The extended Kalman filter (EKF) is generally used for SOC estimation, however its accuracy can decrease owing to the uncertain and inaccurate parameters of battery models and various factors with different time scales affecting the SOC. Herein, a SOC estimation method based on the EKF is proposed to obtain robust accuracy, in which the errors are compensated by a long short-term memory (LSTM) network. The proposed approach trains the errors of the EKF results, and the accurate SOC is estimated by applying calibration values corresponding to the condition of the battery and its load profiles with the help of LSTM. Furthermore, a multi-LSTM structure is implemented, and it adopts the ensemble average to guarantee estimation accuracy. SOC estimation with a root mean square error of less than 1% was found to be close to the actual SOC calculated by coulomb counting. Moreover, once the EKF model was established and the network trained, it was possible to predict the SOC online.


Inventions ◽  
2019 ◽  
Vol 4 (4) ◽  
pp. 66 ◽  
Author(s):  
Ning Ding ◽  
Krishnamachar Prasad ◽  
Tek Tjing Lie ◽  
Jinhui Cui

The battery State of Charge (SoC) estimation is one of the basic and significant functions for Battery Management System (BMS) in Electric Vehicles (EVs). The SoC is the key to interoperability of various modules and cannot be measured directly. An improved Extended Kalman Filter (iEKF) algorithm based on a composite battery model is proposed in this paper. The approach of the iEKF combines the open-circuit voltage (OCV) method, coulomb counting (Ah) method and EKF algorithm. The mathematical model of the iEKF is built and four groups of experiments are conducted based on LiFePO4 battery for offline parameter identification of the model. The iEKF is verified by real battery data. The simulation results with the proposed iEKF algorithm under both static and dynamic operation conditions show a considerable accuracy of SoC estimation.


Energies ◽  
2020 ◽  
Vol 13 (16) ◽  
pp. 4197
Author(s):  
Jiandong Duan ◽  
Peng Wang ◽  
Wentao Ma ◽  
Xinyu Qiu ◽  
Xuan Tian ◽  
...  

State of charge (SOC) estimation plays a crucial role in battery management systems. Among all the existing SOC estimation approaches, the model-driven extended Kalman filter (EKF) has been widely utilized to estimate SOC due to its simple implementation and nonlinear property. However, the traditional EKF derived from the mean square error (MSE) loss is sensitive to non-Gaussian noise which especially exists in practice, thus the SOC estimation based on the traditional EKF may result in undesirable performance. Hence, a novel robust EKF method with correntropy loss is employed to perform SOC estimation to improve the accuracy under non-Gaussian environments firstly. Secondly, a novel robust EKF, called C-WLS-EKF, is developed by combining the advantages of correntropy and weighted least squares (WLS) to improve the digital stability of the correntropy EKF (C-EKF). In addition, the convergence of the proposed algorithm is verified by the Cramér–Rao low bound. Finally, a C-WLS-EKF method based on an equivalent circuit model is designed to perform SOC estimation. The experiment results clarify that the SOC estimation error in terms of the MSE via the proposed C-WLS-EKF method can efficiently be reduced from 1.361% to 0.512% under non-Gaussian noise conditions.


2015 ◽  
Vol 713-715 ◽  
pp. 1094-1098
Author(s):  
Hong Ce Zhang ◽  
Pu Shen Wang ◽  
Jiang Jiang ◽  
Hong Fei Cao

Extended Kalman Filter (EKF) is widely studied in the field of State of Charge (SOC) estimation of Li-ion batteries, however, in applications like Electric Vehicles (EV), there are usually a large number of individual battery cells. In order to meet the demand of real-time computation, MCU of high performance is essential. In this paper, we proposed a hardware structure to implement EKF which is economical in area and power consumption and could be easily integrated in a larger design and at the same time could satisfy the real-time restriction.


Sign in / Sign up

Export Citation Format

Share Document