scholarly journals COMPARATIVE ANALYSIS OF MAMMALIAN SPERM MOTILITY

1972 ◽  
Vol 53 (2) ◽  
pp. 561-573 ◽  
Author(s):  
David M. Phillips
Keyword(s):  
High Speed ◽  
Mammalian Species ◽  
Chinese Hamster ◽  
Small Radius ◽  
Radius Of Curvature ◽  
Large Radius ◽  
Cross Sectional ◽  
Mammalian Sperm ◽  
High Speed Cinematography ◽  
Pass Through

Spermatozoa of several mammalian species were studied by means of high-speed cinematography and electron microscopy. Three types of motile patterns were observed in mouse spermatozoa. The first type involved an asymmetrical beat which seemed to propel the sperm in circular paths. The second type involved rotation of the sperm and appeared to allow them to maintain straight paths. In the third type of pattern, the sperm appeared to move by crawling on surfaces in a snakelike manner. Spermatozoa of rabbit and Chinese hamster also had an asymmetrical beat which sometimes caused them to swim in circles. In spite of the asymmetry of the beat, these spermatozoa were also able to swim in straight paths by rotating around a central axis as they swam. Spermatozoa of some species appeared very flexible; their flagella formed arcs with a very small radius of curvature as they beat. Spermatozoa of other species appeared very stiff, and their flagella formed arcs with a very large radius of curvature. The stiffness of the spermatozoan appeared to correlate positively with the cross-sectional area of the dense fibers. This suggests that the dense fibers may be stiff elastic elements. Opossum sperm become paired as they pass through the epididymis. Pairs of opossum spermatozoa beat in a coordinated, alternating manner.

scholarly journals Grip and limb force limits to turning performance in competition horses

2010 ◽  
Vol 278 (1715) ◽  
pp. 2105-2111 ◽  
Author(s):  
Huiling Tan ◽  
Alan M. Wilson
Keyword(s):  
Angular Velocity ◽  
High Speed ◽  
Small Radius ◽  
Maximum Speed ◽  
Large Radius ◽  
Centripetal Acceleration ◽  
Straight Line ◽  
Prey Interaction ◽  
The Coefficient Of Friction ◽  
Stride Parameters

Manoeuverability is a key requirement for successful terrestrial locomotion, especially on variable terrain, and is a deciding factor in predator–prey interaction. Compared with straight-line running, bend running requires additional leg force to generate centripetal acceleration. In humans, this results in a reduction in maximum speed during bend running and a published model assuming maximum limb force as a constraint accurately predicts how much a sprinter must slow down on a bend given his maximum straight-line speed. In contrast, greyhounds do not slow down or change stride parameters during bend running, which suggests that their limbs can apply the additional force for this manoeuvre. We collected horizontal speed and angular velocity of heading of horses while they turned in different scenarios during competitive polo and horse racing. The data were used to evaluate the limits of turning performance. During high-speed turns of large radius horizontal speed was lower on the bend, as would be predicted from a model assuming a limb force limit to running speed. During small radius turns the angular velocity of heading decreased with increasing speed in a manner consistent with the coefficient of friction of the hoof–surface interaction setting the limit to centripetal force to avoid slipping.

scholarly journals Identification of Apical and Cervical Curvature Radius of Human Molars

2015 ◽  
Vol 26 (4) ◽  
pp. 351-356 ◽  
Author(s):  
Carlos Estrela ◽  
Mike R. Bueno ◽  
Fernando B. Barletta ◽  
Orlando A. Guedes ◽  
Olavo C. Porto ◽  
...  
Keyword(s):  
Sagittal Plane ◽  
Small Radius ◽  
Radius Of Curvature ◽  
Curvature Radius ◽  
Large Radius ◽  
Chi Square ◽  
Root Canals ◽  
Plane Analysis ◽  
Chi Square Test ◽  
Curved Root Canals

<p>To determine the frequency of apical and cervical curvatures in human molars using the radius method and cone-beam computed tomography (CBCT) images. Four hundred images of mandibular and maxillary first and second molars were selected from a database of CBCT exams. The radius of curvature of curved root canals was measured using a circumcenter based on three mathematical points. Radii were classified according to the following scores: 0 - straight line; 1 - large radius (r>8 mm, mild curvature); 2 - intermediate radius (r>4 and r<8 mm, moderate curvature); and 3 - small radius (r≤4 mm, severe curvature). The frequency of curved root canals was analyzed according to root canal, root thirds, and coronal and sagittal planes, and assessed using the chi-square test (significance at α=0.05). Of the 1,200 evaluated root canals, 92.75% presented curved root canals in the apical third and 73.25% in the cervical third on coronal plane images; sagittal plane analysis yielded 89.75% of curved canals in the apical third and 77% in the cervical third. Root canals with a large radius were significantly more frequent when compared with the other categories, regardless of root third or plane. Most root canals of maxillary and mandibular first and second molars showed some degree of curvature in the apical and cervical thirds, regardless of the analyzed plane (coronal or sagittal).</p>

Study of Insertion Force and Deformation for Suturing With Precurved NiTi Guidewire

2015 ◽  
Vol 137 (4) ◽  
Author(s):  
Yancheng Wang ◽  
Roland K. Chen ◽  
Bruce L. Tai ◽  
Kai Xu ◽  
Albert J. Shih
Keyword(s):  
Experimental Study ◽  
Minimally Invasive ◽  
Ex Vivo ◽  
Nickel Titanium ◽  
Small Radius ◽  
Radius Of Curvature ◽  
Large Radius ◽  
Position Measurement ◽  
Insertion Force ◽  
Before And After

This research presents an experimental study evaluating stomach suturing using a precurved nickel–titanium (NiTi) guidewire for an endoscopic minimally invasive obesity treatment. Precise path planning is critical for accurate and effective suturing. A position measurement system utilizing a hand-held magnetic sensor was used to measure the shape of a precurved guidewire and to determine the radius of curvature before and after suturing. Ex vivo stomach suturing experiments using four different guidewire tip designs varying the radius of curvature and bevel angles were conducted. The changes in radius of curvature and suturing force during suturing were measured. A model was developed to predict the guidewire radius of curvature based on the measured suturing force. Results show that a small bevel angle and a large radius of curvature reduce the suturing force and the combination of small bevel angle and small radius of curvature can maintain the shape of guidewire for accurate suturing.

scholarly journals Mathematical interpretation of artificial ovoids and avian egg shapes (part I)

2019 ◽  
Vol 10 (1) ◽  
pp. 92-102
Author(s):  
I. S. Mytiai ◽  
A. V. Matsyura
Keyword(s):  
Computer Software ◽  
Vertical Axis ◽  
Small Radius ◽  
Radius Of Curvature ◽  
Lateral Side ◽  
Horizontal Line ◽  
Large Radius ◽  
Geometrical Figure ◽  
The Real ◽  
Bird Eggs

We performed comparative analysis of curvature characteristics of bird eggs and used ovoid profiles from various authors, our own geometric profiles, and archive bird egg profiles from our database. We suggested that the possible ovoids arise by changing the curvature radii of the polar and lateral zones. We compared the constructed curves and curves presented in oological literature with the pictures of the real bird egg profiles. The volume of actual material includes 16,490 eggs from 800 species of 20 bird orders. Specially designed computer software had calculated the radius of curvature of real bird eggs from photos and drew out the half-profiles presented in our article. We supposed that the asymmetrical ovoid is the most widespread geometric egg-shaped figure, which can easily be obtained by combination of circles. We also calculated that if the ovoid diameter were taken as a unit, then the radius obtuse (infundibular) pole would be equal to its half-length, lateral (side arcs) is equal two lengths, and the cloacal arch is 1–√2/2. From this suggestion, we concluded that the length of the ovoid is 2–√2/2 and its cloacal radius is equal to the difference between the length of ovoid and its diameter (rc = L–D). We analyzed the geometry of this asymmetrical oval and came to the conclusion that this is the basic form able to generate the derivative forms. We discovered that the centres of the arcs which form it lie on one basic/supporting circle, the diameter of which is equal to the ovoid diameter. All other ovoids, which have radius equal to radius of the infundibular zone we called the real ovoids. The changes in the radii of the lateral arcs are caused by the movement of their centres along a horizontal line passing through the centre of the base circle. This causes the prolongation or shortening of the ovoids. Sizes of cloacal arcs depended on the lateral, and their centres are placed along the vertical axis. Variability of the sizes of the abovementioned arcs caused the variability of form of the bird eggs. For their classification, we have proposed to divide them into five groups: sphere-like, circle, obtuse, droplet, and cone-shaped. Further, we separated some more groups: short, shortened, normal, lengthened, and long; according to the sizes of cloacal arcs – large radius, middle radius, and small radius ovoids. As a result, we have 80 forms of real ovoids – standards which describe the varieties of bird eggs. Each of them has its own number, name, geometrical figure, polynomic equation, and correlations of ovoid parameters. This set of ovoids is sufficient to describe the specifics of any form of bird eggs.

scholarly journals Novel Transaortic Double Barrel Ventricular Cannula

2009 ◽  
Vol 3 (2) ◽  
Author(s):  
J. D. Cezo ◽  
S W. Day
Keyword(s):  
Aortic Valve ◽  
Flow Rate ◽  
High Speed ◽  
Heart Surgery ◽  
Open Heart Surgery ◽  
Aortic Insufficiency ◽  
Flow Loop ◽  
Cross Sectional ◽  
High Speed Cinematography ◽  
Valve Sealing

A novel transaortic ventricular cannula, known as the ‘double barrel’ cannula (DBC), is designed to minimize the invasiveness of Ventricular Assist Device (VAD) implantation by combining the inlet and outlet cannulae into a single dual lumen cannula. Both flows will pass through a single opening in the apex of the Left Ventricle with the outflow then continuing past the aortic valve, into the aortic arch. This design offers several potential advantages over the current state-of-the-art. These include less invasive surgery and providing mechanical support to the septum. By routing the outflow through the aortic valve, the need to access the external structure of the ascending aorta is eliminated thereby eliminating the need for open heart surgery. In determining the DBC's design, close attention has been paid to the outflow portion of the cannula, which passes through the aortic valve. It was anticipated that this portion of the DBC could have the largest impact on the device's usability in practice. The object of this study was to test the performance of the valve with the cannula passing through it. Three different geometries are circular, equilateral triangular, and one-third semicircular. Experiments measuring aortic insufficiency during the diastolic phase were conducted. The experiment was designed to analyze several geometries passing through an aortic valve under diastolic flow conditions. All experiments used a simple flow loop which allows a natural porcine aortic valve to be viewed from downstream. The loop was driven with a pneumatic ventricular simulator in order to produce a cyclic flow. Three cannulae cross-sections were molded from RTV11 Silicone. During this test, High Speed Cinematography and flow rate measurement were used to quantify valve sealing and leakage. All data was collected and analyzed for the three cross-sectional geometries during diastole. The performances of the three geometries were compared using American Heart Association guidelines of aortic insufficiency (Al) diagnosis. The flow rate data was integrated in order to determine the volume of ventricle ejection and valve regurgitation. All three geometries exhibit low and acceptable levels of Al (⩽15%Al), with the circular geometry causing the least amount of Al at 7.1%. The experimental control (Porcine aortic valve with no cannulae) exhibited an Al or 2.4%, validating both the harvested aortic valve and experimental flow loop for further testing. Using the high speed cinematography, several phenomena were observed during the sealing of the porcine valve; including leaflet folding leaflet bunching, and cannula displacement due to valve closure.

scholarly journals Laser Lens Size Measurement Using Swept-Source Optical Coherence Tomography

2020 ◽  
Vol 10 (14) ◽  
pp. 4936
Author(s):  
Pingping Jia ◽  
Hong Zhao ◽  
Yuwei Qin
Keyword(s):  
Optical Coherence Tomography ◽  
High Speed ◽  
Wave Number ◽  
Radius Of Curvature ◽  
Optical Coherence ◽  
Swept Source ◽  
Laser Focusing ◽  
Fitting Algorithm ◽  
Laser Confocal Microscope ◽  
Focusing Lens

A high-speed, high-resolution swept-source optical coherence tomography (SS-OCT) is presented for focusing lens imaging and a k-domain uniform algorithm is adopted to find the wave number phase equalization. The radius of curvature of the laser focusing lens was obtained using a curve-fitting algorithm. The experimental results demonstrate that the measuring accuracy of the proposed SS-OCT system is higher than the laser confocal microscope. The SS-OCT system has great potential for surface topography measurement and defect inspection of the focusing lens.

scholarly journals Observation and analysis of diving beetle movements while swimming

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Debo Qi ◽  
Chengchun Zhang ◽  
Jingwei He ◽  
Yongli Yue ◽  
Jing Wang ◽  
...  
Keyword(s):  
Swimming Speed ◽  
High Speed ◽  
Kinematic Model ◽  
Movement Pattern ◽  
Unmanned Vehicles ◽  
Power Stroke ◽  
Cross Sectional ◽  
Motion Data ◽  
The Cross ◽  
Diving Beetle

AbstractThe fast swimming speed, flexible cornering, and high propulsion efficiency of diving beetles are primarily achieved by their two powerful hind legs. Unlike other aquatic organisms, such as turtle, jellyfish, fish and frog et al., the diving beetle could complete retreating motion without turning around, and the turning radius is small for this kind of propulsion mode. However, most bionic vehicles have not contained these advantages, the study about this propulsion method is useful for the design of bionic robots. In this paper, the swimming videos of the diving beetle, including forwarding, turning and retreating, were captured by two synchronized high-speed cameras, and were analyzed via SIMI Motion. The analysis results revealed that the swimming speed initially increased quickly to a maximum at 60% of the power stroke, and then decreased. During the power stroke, the diving beetle stretched its tibias and tarsi, the bristles on both sides of which were shaped like paddles, to maximize the cross-sectional areas against the water to achieve the maximum thrust. During the recovery stroke, the diving beetle rotated its tarsi and folded the bristles to minimize the cross-sectional areas to reduce the drag force. For one turning motion (turn right about 90 degrees), it takes only one motion cycle for the diving beetle to complete it. During the retreating motion, the average acceleration was close to 9.8 m/s2 in the first 25 ms. Finally, based on the diving beetle's hind-leg movement pattern, a kinematic model was constructed, and according to this model and the motion data of the joint angles, the motion trajectories of the hind legs were obtained by using MATLAB. Since the advantages of this propulsion method, it may become a new bionic propulsion method, and the motion data and kinematic model of the hind legs will be helpful in the design of bionic underwater unmanned vehicles.

Experimental investigation and optimization on field shaper structure parameters in magnetic pulse welding

2021 ◽  
pp. 095440542110148
Author(s):  
Yingzi Chen ◽  
Zhiyuan Yang ◽  
Wenxiong Peng ◽  
Huaiqing Zhang
Keyword(s):  
Magnetic Field ◽  
High Speed ◽  
Light Metal ◽  
Magnetic Pulse ◽  
Cross Sectional ◽  
Magnetic Pulse Welding ◽  
Pulse Welding ◽  
Sectional Shape ◽  
Welding System ◽  
The Magnetic Field

Magnetic pulse welding is a high-speed welding technology, which is suitable for welding light metal materials. In the magnetic pulse welding system, the field shaper can increase the service life of the coil and contribute to concentrating the magnetic field in the welding area. Therefore, optimizing the structure of the field shaper can effectively improve the efficiency of the system. This paper analyzed the influence of cross-sectional shape and inner angle of the field shaper on the ability of concentrating magnetic field via COMSOL software. The structural strength of various field shapers was also analyzed in ABAQUS. Simulation results show that the inner edge of the field shaper directly affects the deformation and welding effect of the tube. So, a new shape of field shaper was proposed and the experimental results prove that the new field shaper has better performance than the conventional field shaper.

scholarly journals The Influence of the Axial Rub Added in the Radial Rub on the Wear of the Seal Fins during the High Speed Rub of Labyrinth-Honeycomb Seal

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 1997
Author(s):  
Bin Lu ◽  
Haijun Xuan ◽  
Xiaojian Ma ◽  
Fangjun Han ◽  
Weirong Hong ◽  
...  
Keyword(s):  
Wear Rate ◽  
High Speed ◽  
State Of The Art ◽  
Negative Influence ◽  
Axial Thrust ◽  
Cross Sectional ◽  
Honeycomb Seal ◽  
Aero Engine ◽  
Honeycomb Seals ◽  
Clearance Change

Labyrinth-honeycomb seals are a state-of-the-art sealing technology commonly used in aero-engine interstage seal. The undesirable severe rub between the seal fins and the honeycomb due to the clearance change may induce the cracking of the seal fins. A pervious study investigated the wear of the seal fins at different radial incursion rates. However, due to the axial thrust and mounting clearance, the axial rub between the seal fins and the honeycomb may occur. Hence, this paper focuses on the influence of the axial rub added in the radial rub on the wear of the seal fins. The rub tests results, including rubbing forces and temperature, wear rate, worn morphology, cross-sectional morphology and energy dispersive spectroscopy results, are presented and discussed. Overall, the participation of the axial rub leads to higher rubbing forces, temperature, and wear rate. The tribo-layer on the seal fin is thicker and the cracks are more obvious at high axial incursion rate. These phenomena indicate the axial rub has a negative influence on the wear of the seal fins and should be avoided.

Duplex Spread Blade Method for Cutting Hypoid Gears with Modified Tooth Surface

1998 ◽  
Vol 120 (3) ◽  
pp. 441-447 ◽  
Author(s):  
K. Kawasaki ◽  
H. Tamura
Keyword(s):  
Cutting Edge ◽  
Tooth Surface ◽  
Radius Of Curvature ◽  
Large Radius ◽  
Ring Gear ◽  
Circular Arc ◽  
Hypoid Gears ◽  
Manufacturing Method ◽  
Straight Line

In this paper, a duplex spread blade method for cutting hypoid gears with modified tooth surface is proposed. The duplex spread blade method provides a rapid and economical manufacturing method because both the ring gear and pinion are cut by a spread blade method. In the proposed method, the nongenerated ring gear is manufactured with cutting edge that is altered from the usual straight line to a circular arc with a large radius of curvature and the circular arc cutting edge produces a modified tooth surface. The pinion is generated by a cutter with straight cutting edges as usual. The main procedure of this method is the determination of the cutter specifications and machine settings. The proposed method was validated by gear manufacture.

Sign in / Sign up

Export Citation Format

Share Document