Molten salt mixtures. Part 3.—Vapour pressure and derived information for the molten salt systems PbCl2+ KCl, CdCl2+ KCl and CdCl2+ NaCl

1959 ◽  
Vol 55 (0) ◽  
pp. 1792-1798 ◽  
Author(s):  
J. L. Barton ◽  
H. Bloom
Keyword(s):  
Molten Salt ◽  
Vapour Pressure ◽  
Salt Mixtures ◽  
Salt Systems

Molten salt mixtures. XI. Integral and partial molar volumes in the molten salt systems PbCl2 + NaCl, PbCl2 + RbCl, PbCl2 + CsCl, CdCl2 + RbCl, and CdCl2 + CsCl

1966 ◽  
Vol 19 (9) ◽  
pp. 1591 ◽  
Author(s):  
H Bloom ◽  
PWD Boyd ◽  
JL Laver ◽  
J Wong
Keyword(s):  
Molten Salt ◽  
Molar Volume ◽  
Partial Molar Volume ◽  
Binary Systems ◽  
Partial Molar Volumes ◽  
Complex Ions ◽  
Molar Volumes ◽  
Temperature Range ◽  
Salt Mixtures ◽  
Salt Systems

The densities of molten PbCl2, CsCl, and RbCl and of the molten salt systems PbCl2 + NaCl, PbCl2 + RbCl, PbCl2 + CsCl, CdCl2 + RbCl, and CdCl, + CsCl have been measured to an accuracy of �0.1% by an Archimedean method over a considerable temperature range. Integral and partial molar volume isotherms have been constructed for the above binary systems and are interpreted to show that complex ions are formed in all but the PbCl2+NaCl system.

Molten salt mixtures. X. The thermochemistry of the binary molten salt systems CdCl2+PbCl2, CdCl2+NaCl, CdCl2+KCI, PbCl2+NaCl, PbCl2-KCl, and CdI2+KI

1966 ◽  
Vol 19 (2) ◽  
pp. 187 ◽  
Author(s):  
H Bloom ◽  
SB Tricklebank
Keyword(s):  
Molten Salt ◽  
Water Solution ◽  
Relative Magnitude ◽  
Enthalpy Change ◽  
Complex Ions ◽  
Heats Of Mixing ◽  
Salt Mixtures ◽  
Solution Calorimeter ◽  
Salt Systems ◽  
The Enthalpy Of Formation

The enthalpy change on cooling molten and solid salts and their mixtures from temperatures as high as 850� down to 26.9� has been measured by means of a Bunsen-type fusion calorimeter. The enthalpy of formation of solid mixtures has also been measured using a water solution calorimeter. From the combined results, heats of mixing have been determined for the molten salt systems investigated. In each system, with the exception of CdCl2 + PbCl2, the process of mixing is exothermic and the relative magnitude of the results can be explained by the formation of complex ions in the systems CdC12 +NaCl, CdCl2 +KCl, PbCl2 +KCl, and CdI2 +KI. Complex ions have not been detected in the other systems.

scholarly journals Remote Density Measurements of Molten Salts via Neutron Radiography

2021 ◽  
Vol 7 (5) ◽  
pp. 88
Author(s):  
Alexander M. Long ◽  
S. Scott Parker ◽  
D. Travis Carver ◽  
J. Matt Jackson ◽  
Marisa J. Monreal ◽  
...  
Keyword(s):  
Molten Salt ◽  
Thermophysical Properties ◽  
Molten Salts ◽  
Neutron Radiography ◽  
National Laboratory ◽  
Science Center ◽  
Los Alamos ◽  
Novel Approach ◽  
Salt Mixtures ◽  
Salt Systems

With an increased interest in the use of molten salts in both nuclear and non-nuclear systems, measuring important thermophysical properties of specific salt mixtures becomes critical in understanding salt performance and behavior. One of the more basic and significant thermophysical properties of a given salt system is density as a function of temperature. With this in mind, this work aims to present and layout a novel approach to measuring densities of molten salt systems using neutron radiography. This work was performed on Flight Path 5 at the Los Alamos Neutron Science Center at Los Alamos National Laboratory. In order to benchmark this initial work, three salt mixtures were measured, NaCl, LiCl (58.2 mol%) + KCl (41.8 mol%), and MgCl2 (32 mol%) + KCl (68 mol%). Resulting densities as a function of temperature for each sample from this work were then compared to previous works employing traditional techniques. Results from this work match well with previous literature values for all salt mixtures measured, establishing that neutron radiography is a viable technique to measure density as a function of temperature in molten salt systems. Finally, advantages of using neutron radiography over other methods are discussed and future work in improving this technique is covered.

Electrochemical studies of molten salt mixtures. I. The electromotive forces of concentration cells with transference containing the molten electrolytesystems PbBr2 + CsBr, PbBr2 + RbBr, and PbBr2 + KBr

1966 ◽  
Vol 19 (9) ◽  
pp. 1577 ◽  
Author(s):  
H Bloom ◽  
AJ Easteal
Keyword(s):  
Molten Salt ◽  
Mole Fraction ◽  
Electrolyte Composition ◽  
Electrochemical Studies ◽  
Liquid Junction ◽  
Salt Mixtures ◽  
Straight Lines ◽  
Salt Systems ◽  
Concentration Cells

The e.m.f.'s of concentration cells with transference (i.e. with liquid junction), containing the binary molten salt systems, PbBr2+CsBr, PbBr2+RbBr, and PbBr2+KBr, have been measured as functions of temperature and electrolyte composition. The cell e.m.f.'s have been found to vary with temperature and electrolyte composition in a discontinuous manner: graphs of cell e.m.f. against temperature are in general a number of intersecting straight lines, as are graphs of cell e.m.f. against the negative logarithm of the mole fraction of one component.

scholarly journals Developing Practical Models of Complex Salts for Molten Salt Reactors

Thermo ◽  
2021 ◽  
Vol 1 (2) ◽  
pp. 168-178
Author(s):  
Theodore M. Besmann ◽  
Juliano Schorne-Pinto
Keyword(s):  
Molten Salt ◽  
Nearest Neighbor ◽  
System Modeling ◽  
Model Parameters ◽  
Calphad Approach ◽  
Coordination Numbers ◽  
Regression Methods ◽  
Complex Salts ◽  
Salt Systems ◽  
Fitting Model

Molten salt reactors (MSRs) utilize salts as coolant or as the fuel and coolant together with fissile isotopes dissolved in the salt. It is necessary to therefore understand the behavior of the salts to effectively design, operate, and regulate such reactors, and thus there is a need for thermodynamic models for the salt systems. Molten salts, however, are difficult to represent as they exhibit short-range order that is dependent on both composition and temperature. A widely useful approach is the modified quasichemical model in the quadruplet approximation that provides for consideration of first- and second-nearest-neighbor coordination and interactions. Its use in the CALPHAD approach to system modeling requires fitting parameters using standard thermodynamic data such as phase equilibria, heat capacity, and others. A shortcoming of the model is its inability to directly vary coordination numbers with composition or temperature. Another issue is the difficulty in fitting model parameters using regression methods without already having very good initial values. The proposed paper will discuss these issues and note some practical methods for the effective generation of useful models.

On the Electrochemical Thermodynamics of Minor Components in Molten Salt Mixtures

2021 ◽  
Vol 168 (2) ◽  
pp. 026502
Author(s):  
R. L. Fitzhugh ◽  
A. D. Clark ◽  
S. D. Nickerson ◽  
M. J. Memmott ◽  
J. N. Harb
Keyword(s):  
Molten Salt ◽  
Minor Components ◽  
Salt Mixtures ◽  
Electrochemical Thermodynamics
Sign in / Sign up

Export Citation Format

Share Document