Kinetics of Deposit Formation from Hydrocarbon Fuels at High Temperatures. General Features of the Process

1967 ◽  
Vol 6 (4) ◽  
pp. 258-262 ◽  
Author(s):  
W. F. Talyor ◽  
T. J. Wallace

In the first paper of this series (Burgoyne 1937) the kinetics of the isothermal oxidation above 400° C of several aromatic hydrocarbons was studied. The present communication extends this work to include the phenomena of ignition in the same temperature range, whilst the corresponding reactions below 400° C form the subject of further investigations now in progress. The hydrocarbons at present under consideration are benzene, toluene, ethylbenzene, n -propylbenzene, o-, m - and p -xylenes and mesitylene.


2001 ◽  
Vol 44 (4) ◽  
pp. 401-404 ◽  
Author(s):  
Fernanda G. A. Ferraz-Grande ◽  
Massanori Takaki

The germination of endangered species Dalbergia nigra was studied and 30.5° C was found as optimum temperature, although the species presented a broad temperature range where germination occurs and light had no effect. The analysis of kinetics of seed germination confirmed the asynchronized germination below and above the optimum temperature. The light insensitive seed and germination also at high temperatures indicated that D. nigra could occur both in understories and gaps where the mean temperature was high.


2017 ◽  
Vol 19 (18) ◽  
pp. 11064-11074 ◽  
Author(s):  
Hongmiao Wang ◽  
Xiaoqing You ◽  
Mark A. Blitz ◽  
Michael J. Pilling ◽  
Struan H. Robertson

This work analyzes the effect of overlapping eigenvalues on the high-temperature kinetics of a large oxyradical based on master equation solutions.


2013 ◽  
Vol 212 ◽  
pp. 137-140 ◽  
Author(s):  
Janusz Cebulski ◽  
Stanisław Lalik

The aim of this paper was to determine the resistance to high-temperature corrosion in atmosphere of air for alloy Fe-40Al-5Cr-0.2Ti-0.2B. Corrosion tests were conducted in temperatures from 600 to 900°C in time from 2 to 64 hours. Conducted tests have shown a slight increase of weight of samples in periods of time which followed. Increase of weight is connected with corrosion products in the form of passive oxides which form on the surface of the alloy. Kinetics of corrosion processes has parabolic course in tested temperature range which proves the formation of passive layers of corrosion products on the surface of samples. Heat resistance of the alloy on intermetallic phase matrix FeAl brings about potential possibilities to apply this alloy as a material meant for work in elevated and high temperatures in the environment which includes oxygen.


1997 ◽  
Vol 469 ◽  
Author(s):  
C. Tsamis ◽  
D. N. Kouvatsos ◽  
D. Tsoukalas

ABSTRACTThe influence of N2O oxidation of silicon on the kinetics of point defects at high temperatures is investigated. Oxidation Stacking Faults (OSF) are used to monitor the interstitials that are generated during the oxidation process. We show that at high temperatures (1050°-1150°C) the supersaturation of self-interstitials in the silicon substrate is enhanced when oxidation is performed in an N2O ambient compared to 100% dry oxidation. This behavior is attributed to the presence of nitrogen at the oxidizing interface. However, at lower temperatures this phenomenon is reversed and oxidation in N2O ambient leads to reduced supersaturation ratios.


1967 ◽  
Vol 7 (1) ◽  
pp. 96
Author(s):  
A.I. Soobotteen ◽  
V.N. Antonov ◽  
V.S. Etlees

Sign in / Sign up

Export Citation Format

Share Document