Relationship between rheological properties and impact strength in high impact polystyrene

1982 ◽  
Vol 22 (11) ◽  
pp. 684-691 ◽  
Author(s):  
Mukund D. Dalal ◽  
Robert C. Armstrong
Keyword(s):  
Impact Strength ◽  
Rheological Properties ◽  
High Impact ◽  
High Impact Polystyrene

scholarly journals PENGARUH PELARUT (ETIL BENZENA), PERBANDINGAN STYRENE BUTADIENE RUBBER (SBR) TERHADAP STIREN, DAN JUMLAH INISIATOR (BPO) PADA PEMBUATAN HIGH IMPACT POLYSTYRENE (HIPS)

2010 ◽  
Vol 2 (2) ◽  
Author(s):  
Dwi Wahyuni
Keyword(s):  
Impact Strength ◽  
High Heat ◽  
High Impact ◽  
Styrene Butadiene Rubber ◽  
Ethyl Benzene ◽  
Butadiene Rubber ◽  
High Impact Polystyrene ◽  
Aerospace Material ◽  
Styrene Butadiene ◽  
The Impact

High impact polystyrene (HIPS) is the widely used material now, and also for the aerospace material as a communication instrument system and an electrical insulation. In order to produce HIPS, there are a view method which can be executed. In this case, the research is executed by the copolymerization processes of styrene butadiene rubber (SBR) solution in styrene. Variables which influence to the result properties (HIPS) are the SBR to styrene ratio, the solvent (ethyl benzene), the benzoyl peroxide initiator (BPO). The properties of the product are tensile strength, impact strength, softening point, melting point and the hardness. The result showed that the properties of the HIPS product was near of the HIPS high heat. The optimal processes condition was the solvent to the styrene monomer ratio was 0.05492, the SBR to the styrene ratio was 0.1236 and the BPO to the styrene ratio was 0,0003. The properties of the HIPS product were: the impact strength was (519-1215) N per cm, the tensil strength not more than was 106 N per cm, the elongation was (36-54) percent and the hardness was (65-69) shore A. This properties achieved at the mixing polymerization processes 4 scale in 11-12 hours, the early mixing at 4 scale 1 hours, the cutting chain 2 drops.

Study on Non-Halogen Flame-Retarded HIPS with High Strength HIPS

2008 ◽  
Vol 47-50 ◽  
pp. 1245-1249
Author(s):  
Zhong Wei Wu ◽  
Qing Jie Jiao ◽  
Chong Guang Zang ◽  
Hui Lan
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Impact Strength ◽  
High Strength ◽  
High Impact ◽  
High Impact Polystyrene ◽  
Flame Retarded ◽  
Notch Impact Strength

PPO was a better intensifier and charred material for High-impact polystyrene (HIPS), it could make HIPS achieve UL94V-0 with APP, MC, RDP. Especially, RDP not only improved the flame-retarded property but also controlled the hole producing, and had the best consistent with matrix which could improve the mechanical properties. SBS and SEBS were better consistent with matrix, especially SEBS was tiny granule, which could be dispersed in matrix easily. The properties of SEBS toughened the non-halogen flame-retarded HIPS was followed: tensile strength: 18.83MPa; izod notch impact strength: 15.7kJ/m2; UL94V-0.

Sign in / Sign up

Export Citation Format

Share Document