Thermo-Acoustic Catalytic Effect on Oxidizing Woody Torrefaction

The torrefaction (mild pyrolysis) process modifies biomass chemical and physical properties and is applied as a thermochemical route to upgrade solid fuel. In this work, the catalytic effect of thermo-acoustic on oxidizing woody torrefaction is assessed. The combined effect of two acoustic frequencies (1411, 2696 Hz) and three temperatures (230, 250, and 290 °C) was evaluated through weight loss and its deviation curves, calculated torrefaction severity index (TSI), as well as proximate, calorific, and compression strength analysis of Eucalyptus grandis. A new index to account for the catalytic effects on torrefaction (TCEI) was introduced, providing the quantitative analysis of acoustic frequencies influence. A two-step consecutive reaction numerical model allowed the thermo-acoustic experiment evaluation. For instance, the thermogravimetric profiles revealed that the acoustic field has a catalytic effect on wood torrefaction and enhances the biomass oxidation process for severe treatments. The kinetic simulation of the acoustic coupling resulted in faster conversion rates for the solid pseudo-components showing the boosting effect of acoustic frequencies in anticipating hemicellulose decomposition and enhancing second step oxidizing reaction.

A novel Cu-nanowire@Quasi-MOF via mild pyrolysis of a bimetal-MOF for the selective oxidation of benzyl alcohol in air

A Cu-nanowire@Quasi-MOF was synthesized using a Cu/Co bimetal-MOF via a thermal decomposition strategy for the first time. The Cu-nanowire@Quasi-MOF exhibits excellent catalytic performance in the selective oxidation of benzyl alcohol in air.

Mild pyrolysis of ionic self-assembled cobalt porphyrins on carbon toward efficient electrochemical conversion of CO2 to CO

Heat-treated self-assembled cobalt porphyrins on carbon electrochemically convert CO2 to CO with a high faradaic efficiency and at a low overpotential.

Investigation of Effect of Biomass Torrefaction Temperature on Volatile Energy Recovery Through Combustion

Biomass torrefaction is a mild pyrolysis thermal treatment process carried out at temperatures between 200 and 300 °C under inert conditions to improve fuel properties of parent biomass. Torrefaction yields a higher energy per unit mass product but releases noncondensable and condensable gases, signifying energy and mass losses. The condensable gases (volatiles) can result in tar formation on condensing, hence, system blockage. Fortunately, the hydrocarbon composition of volatiles represents a possible auxiliary energy source for feedstock drying and/or torrefaction process. The present study designed a low-pressure volatile burner for torrefaction of pine wood chips and investigated energy recovery from volatiles through clean co-combustion with natural gas (NG). The research studied the effects of torrefaction pretreatment temperatures on the amount of energy recovered for various combustion air flow rates. For all test conditions, blue flames and low emissions at the combustor exit consistently signified clean and complete premixed combustion. Torrefaction temperature at 283–292 °C had relatively low volatile energy recovery, mainly attributed to higher moisture content evolution and low molecular weight of volatiles evolved. At the lowest torrefaction pretreatment temperature, small amount of volatiles was generated with more energy recovered. Energy conservation evaluation on the torrefaction reactor indicated that about 27% of total energy carried by the exiting volatiles and gases has been recovered by the co-fire of NG and volatiles at the lowest temperature, while around 19% of the total energy was recovered at the intermediate and highest torrefaction temperatures, respectively. The energy recovered represents about 23–45% of the energy associated with NG combustion in the internal burner of the torrefaction reactor, signifying that the volatiles energy can supplement significant amount of the energy required for torrefaction.