Formation of Nano-Sized Structural-Phase States in Surface Layers of a Cermet Alloy and the Influence of the States on the Tool Life of Cermet Plates in Metal Cutting

A comparative analysis of the surface-layer microstructure of a tungsten-based cermet alloy modified with pulsed high-energy electron beams generated by gas-discharge plasmas and of the tool life of metal-cutting plates prepared from this alloy is performed. The choice of a plasma-forming gas providing for the emission of electrons out of the plasma-filled cathode is shown to have a profound influence both on the formation process of nanosized structural-phase states in the surface layer of the cermet alloy and on the tool life of the metal-cutting plates prepared from this alloy.

Properties of New TiC/TiB2/Fe-Al Cermet Alloy

Effect of TiB2 substitution on thermal conductivity and hardness in TiC / Fe-Al cermets was investigated. The (70-x)TiC / xTiB2 / 26Fe-4Al mass % cermets were fabricated by mechanical milling and subsequent pulsed current sintering method. The high relative density compacts was formed by sintering at 1423 K under 25 MPa for 60 s. The sintered materials were mainly composed of TiC, TiB2 and Fe-Al intermetallic compound. In addition, small amounts of Fe2B surrounding TiB2 were formed. The thermal conductivity of the sintered compact lineally increased with increasing TiB2 volume fraction. However, the hardness of the sintered compacts of x = 20 – 40 were higher than that of x = 0. Therefore, the substitution of TiC to TiB2 in the TiC / Fe-Al based cermet is effective to improve the thermal conductivity without the degradation of hardness.