Class II correction by maxillary en masse distalization using a completely customized lingual appliance and a novel mini-screw anchorage concept – preliminary results

Background The aim of the study was to evaluate the efficacy of a novel en masse distalization method in the maxillary arch in combination with a completely customized lingual appliance (CCLA; WIN, DW Lingual Systems, Germany). Therefore, we tested the null-hypothesis of a significant deviation from an Angle-Class I canine relationship and a normal overjet defined by an individual target set-up after dentoalveolar compensation in Angle Class II subjects. Methods This retrospective study included 23 patients, (m/f 3/20, mean age 29.6 years (min/max, 13.6/50.9 years)), with inclusion criteria of an Angle Class II occlusion of more than half a cusp prior to en masse distalization and treatment completed consecutively with a CCLA in combination with a mini-screw (MS) anchorage for uni- or bilateral maxillary distalization (12 bilateral situations, totalling 35). Plaster casts taken prior to (T0) and following CCLA treatment (T3) were compared with the treatment plan / set-up (TxP, with a Class I canine relationship and a normal overjet as the treatment objective). MSs were placed following levelling and aligning (T1) and removed at the end of en masse distalization at T2. Statistical analysis was carried out using Schuirmann’s TOST [two one-sided tests] equivalence test, based on a one-sample t-test with α = 0.025 on each side (total α = 0.05). Results Ninety-seven percent of planned correction of the canine relationship was achieved (mean 3.6 of 3.7 mm) and also 97 % of the planned overjet correction (mean 3.1 of 3.2 mm), with a statistically significant equivalence (p < 0.0001) for canine relationship and overjet between the individual treatment plan (set-up) and the final outcome. Adverse effects were limited to the loss of n = 2 of 35 mini-screws. However, in each instance, the treatment was completed, as scheduled, without replacing them. Accordingly, the null-hypothesis was rejected. Conclusions The technique presented allows for a predictable correction of an Angle-Class II malocclusion via dentoalveolar compensation with maxillary en masse distalization.

Herbst Appliance palatally anchored in the treatment of dental class II malocclusion

In this case report, Authors describe the correction of a class II malocclusion using only an Herbst appliance palatally anchored with miniscrews. Before sagittal correction in the same appliance we applied a palatal screw to obtain maxillary expansion. The device were removed after 12 months of treatment. The final result included the correction of Class II malocclusion by lower dentoalveolar compensation mainly. The lip function favorite the spontaneous correction of upper frontal torque with consequent improvement of facial esthetics. After a follow up of 12 months the clinical result is satisfactory in terms of occlusion and esthetics. This clinical case showed a simple orthopedic and dentoalveolar approach to correct transversal discrepancy, dental class II malocclusion and also frontal proclination only with one appliance in a very short treatment time.

Orthodontic camouflage treatment using a passive self-ligating system in skeletal Class III malocclusion

Background: The treatment options for adults with skeletal Class III malocclusion can be dentoalveolar compensation, also known as orthodontic camouflage, or orthognathic surgery. Camouflage treatment can be carried out with teeth extractions, distalisation of the mandibular dentition, and use of Class III intermaxillary elastics. However, intermaxillary elastics as anchorage has its own risk–benefit. Purpose: To explain that camouflage treatment with teeth extractions can be performed in a mild to moderate skeletal Class III malocclusion using intermaxillary anchorage with elastics, while minimising the deleterious effects and achieving a satisfactory treatment outcome. Case: Our patient was a 25-year-old female who had a skeletal Class III pattern, with normal maxilla and a protruded mandible. She had a straight facial profile with a Class III canine and molar relationship on her right and left sides. Anterior crossbite was also present with crowding on both the maxilla and the mandible. Case Management: The treatment plan was carried out with dentoalveolar compensation by extracting teeth. Extraction of the lower first premolars was conducted to eliminate the crowding and correct the anterior crossbite. The mandibular incisors were retroclined and the maxillary incisors were proclined with dentoalveolar compensation. Passive self-ligating system was used with standard torque prescription, intermaxillary anchorage, and no additional appliances for anchorage control. Class I canine and incisor relationship were both achieved at the end of the treatment, while maintaining the Class III molar relationship. Conclusion: Orthodontic camouflage treatment in an adult patient using a passive self-ligating system and intermaxillary anchorage can improve facial profile and improve dental occlusion.

Features of the structure of the alveolar process in patients with gnatic form of mesial occlusion

Aim. To assess the size of the alveolar ridge / part of the jaws in patients with gnathic mesial occlusion of the dentition.Materials and methods. A study was carried out, during which we determined the structural features of the alveolar ridge of the upper and lower jaws of 50 adult patients (from 18 to 44 years old), and also studied the presence / absence of the relationship of this parameter with the inclination of the teeth.Results. The smallest thickness of the alveolar bone in the upper jaw was observed in the area of the mesio-buccal root of the first molars and in the area of the first premolars and canines. The smallest thickness of the alveolar bone in the lower jaw was observed in the area of the vestibular surface of the first and second premolars, canines and incisors. The greatest thickness of the alveolar bone is observed in the distal-buccal region of the second molars.Conclusions. A natural mechanism promotes dentoalveolar compensation, while maintaining the amount of bone in the region of the vestibular and lingual alveolar bones to maintain the integrity of the periodontium.

Interdisciplinary Orthodontic and Surgical Management of Class III Malocclusion in Adult Patients

The treatment of class III malocclusion differs depending on the age of the patient. In adult patients, alternatives include either orthodontic dentoalveolar compensation treatment or a combined ortho-surgical approach. The aim of this paper is to present the orthodontic and surgical treatment of a 24 year old adult patient with increased anterior face height, a class III skeletal pattern and mandibular asymetry. Previous orthodontic treatment with removable appliances obtained a 1 mm overbite and overjet. Intraorally, class III molar relationship was observed, proclined upper incisors, retroclined lower incisors and a deviated lower midline. The main complaint was facial esthetics which required surgical intevention. After pre-surgical orthodontic preparation the maxilla was repositioned by a Le Fort I osteotomy and the mandible was set back using the Obwegeser-Dal Pont method. Final assesment revealed both functional and esthetic dentofacial results. A combination of orthodontic treatment and orthognathic surgery is often required in adult patients with dental malocclusion and skeletal discrepancies.

Collaborative treatment for a case of condylar hyperplastic facial asymmetry

ABSTRACT Facial asymmetry can be caused by unilateral condylar hyperplasia. In such cases, it may be difficult to achieve symmetry since there is dentoalveolar compensation on the affected side, and the occlusal cant does not correspond to the frontal mandibular deviation. In the case presented, surgical orthodontic treatment and orthognathic surgery planning was accomplished for a patient with facial asymmetry due to condylar hyperplasia. The surgical plan was devised with particular attention to the severe dentoalveolar compensation. In this case, prior to the two-jaw surgery, the occlusal cant and frontal mandibular plane inclination was corrected through impaction of the left molar region by segmental osteotomy. Facial asymmetry and severe dentoalveolar compensation were successfully corrected after a unilateral segmental osteotomy and two-jaw surgery, resulting in a stable occlusal relationship and facial symmetry as well as good jaw function. Collaboration between the orthodontists and maxillofacial surgeons was essential for the successful treatment of the patient.

Two-Step Extraction of the Lower First Molar for Class III Treatment in Adult Patient

The aim of this article is to describe a case report of Class III malocclusion treatment with lower first molar extraction. The 27-year-old Caucasian male patient presented a symmetric face with a straight profile, hyperdivergent growth pattern, molar and cuspid Class III relation, and an anterior crossbite as well as a mild crowding on cuspids area, in both upper and lower arches and a tendency to posterior crossbite. The treatment was performed by the use of Haas expansion appliance followed by an initial alignment and leveling of the upper and lower arches with a fixed edgewise appliance, extraction of lower teeth aiming the correction of the incisors proclination and end the treatment with a Class I molar relationship. It resulted in a significant change in the patient’s profile, dentoalveolar Class III correction, upper arch expansion, leveling and alignment of the upper and lower arches, and improvement of tipping of the upper and lowers incisors. In cases of a dentoalveolar compensation in well positioned bone bases the treatment with fixed appliances is an alternative and extraction of lower teeth is considered.

Facial mask and Meaw technique in a class III patient managing. Case report

The management of Class III malocclusion involves several considerations to be taken at the time of making therapeutic decisions, such as age, sex, the technique used, general conditions of the patient, collaboration and aesthetic requirements. This is a malocclusion that demands quick and effective action to ensure aesthetic and functional conditions as a priority. This report presents a case of a 14 years with a skeletal Class III malocclusion treated initially with facial mask and Mc .Namara breaker, in order to make a posteroanterior protraction of the maxilla and the mandible sagital control, then continue with the technique of MEAW multi-ansas, thus achieves a dentoalveolar compensation and better occlusal adjustment.