Synthesis and characterization of genistein magnetic molecularly imprinted polymers and their application in soy sauce products

In this study, a novel method based on genistein magnetic molecularly imprinted polymers (Gen-MMIPs) was developed utilizing a surface molecular imprinting technique, in which genistein was used as the template molecule and Fe3O4 was used as the carrier. The synthesis of Gen-MMIPs was characterized by using scanning electron microscopy (SEM) and transmission electron microscopy (TEM), which indicated that the diameter of the Gen-MMIPs was approximately 500 nm. Via analysis with a vibrating sample magnetometer (VSM), the saturation magnetization of Gen-MMIPs was determined to be 24.79 emu g−1. Fourier transform infrared (FT-IR) spectroscopy showed that polymer groups were on the surface of the magnetic carrier. Adsorption experiments suggested that the genistein adsorption capability of Gen-MMIPs was 5.81 mg g−1, and adsorption equilibrium was achieved within 20 min. Gen-MMIPs as dispersive solid-phase extraction (dSPE) adsorbents combined with HPLC were used to selectively separate genistein in soy sauce samples, and the recoveries ranged from 85.7 to 88.5% with relative standard deviations (RSDs) less than 5%, which proved that this method can be used for the detection of genistein residues in real samples.

Synthesis and Characterization of Genistein Magnetic Molecularly Imprinted Polymers and Its Application in Soy Sauce Products

In this study, a novel method based on genistein magnetic molecularly imprinted polymers (Gen-MMIPs) was developed by surface molecular imprinting technique, in which genistein was used as the template molecule and Fe3O4 was used as the carrier. The synthesis of Gen-MMIPs were characterized by using of scanning electron microscopy (SEM) and transmission electron microscopy (TEM), which indicated the diameters of Gen-MMIPs were about 500 nm. Through the technique of vibrating sample magnetometer (VSM), the saturation magnetization of Gen-MMIPs were detected as 24.79 emu/g. Fourier transform infrared (FR-IR) spectroscopy showed that polymer groups were on the surface of the magnetic carrier. Adsorption experiment suggested the adsorption capability of Gen-MMIPs to genistein were 1.55 mg/g, and 2 the adsorption equilibrium was achieved within 20 min. Gen-MMIPs as dispersive solid-phase extraction adsorbent combined with HPLC was used to selectively separate genistein in soy sauce samples, the recoveries were ranged from 85.7% to 88.5% with the relative standard deviations (RSD) less than 5%, which proved this method can be used for the detection of genistein residues in real samples.

A convenient separation method for di(2-ethylhexyl)phthalate by novel superparamagnetic molecularly imprinted polymers

Through surface molecular imprinting technique and coating superparamagnetic Fe3O4 nanoparticles with molecularly imprinted polymers, a novel MMIP was successfully fabricated for the convenient separation of DEHP.

Selective Adsorption and Pre-Concentration of Morin by Molecularly Imprinted Polymers with Chitosan Beads as Functional Matrix

To separate and enrich morin, a molecularly imprinted polymer (MIP) was synthesized on chitosan by surface molecular imprinting technique and characterized with Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). The results showed that MIP possessed better selectivity and recognition for morin in a mixture than that of non-imprinted polymer (NIP). The saturated adsorption amount of MIP was 8.0 mg/g, which was 4-fold than that of NIP, and the recovery in the elution step was 94.87% and 10.97% for MIP and NIP, respectively. These findings indicate MIP could realize the separation and pre-concentration of morin in real sample and may be used for solid phase extraction (MIP-SPE) protocol.

Preparation of Cu2+ Imprinted Polymer Microspheres and its Application for the Determination of Cu2+ in Water

Copper (II) imprinted polymer particles were prepared by surface molecular imprinting technique in toluenewith 1-hy-droxy-4-(prop-2-enyloxy)-9, 10-anthraquinone (AQ) as the functional monomer, silica gel as the carrier.The effect of adsorption time, acidity, temperature and concentration on adsorption capacity was investigated by atomic absorption spectrometry. Selectivity for Cu2+ of the prepared polymer was also studied in mixed aqueous solution, the ion imprinted polymer were applied to the determination of Cu2+ in river and tap water samples, the concentration of Cu2+ in water samples were determined and the recoveries of Cu2+ in river and tap water samples were 110.7% and 109.2%, respectively.