Photosensitive Yb-Doped Germanophosphosilicate Artificial Rayleigh Fibers as a Base of Random Lasers

Asingle-mode Yb-doped germanophosphosilicate fiber with ultra-low optical losses (less than 2 dB/km) was fabricated by means of the MCVD method utilizing an all-gas-phase deposition technique developed “in house”. The absorption and luminescent spectral properties of the fiber were thoroughly studied. The photosensitivity of the pristine (non-hydrogenated) fiber to 248 nm-laser radiation was confirmed by means of fiber Bragg grating (FBG) inscription directly during the drawing process. The random single-frequency lasing at the 1060-nm-wavelength obtained in the 21-m-long fiber with an array of weak FBG was reported. The developed laser slope efficiency in the backward-pumping scheme was measured as high as 32%.

“Vitruvian” precursor for gas phase deposition: structural insights into iridium β-diketonate volatilities

A combination of theoretical, empirical, and experimental methods was utilized to rationalize the iridium β-diketonate volatilities at the molecular level.

MODELING OF GAS-PHASE DEPOSITION AND BASIC INHOMOGENEITIES OF SILICON OXIDE LAYERS

A molecular-kinetic model of the deposition of layers from the gas phase is proposed. Impurity, polymorphism, and nonconformity are estimated as inhomogeneities of silicon oxide layers obtained by oxidation of monosilane and tetraethoxysilane.

Nanostructured IrOx Coatings for Efficient Oxygen Evolution Reactions in PV-EC Setup

New heteroleptic iridium compounds exhibiting high volatility and defined thermal decomposition behavior were developed and tested in plasma-enhanced chemical vapor deposition (PECVD). The iridium precursor [(COD)Ir(TFB-TFEA)] (COD = 1,5-cyclooctadiene; TFB-TFEA = N-(4,4,4-Trifluorobut-1-en-3-on)-6,6,6-trifluoroethylamin) unifies both reactivity and sufficient stability through its heteroleptic constitution to offer a step-by-step elimination of ligands to provide high compositional purity in CVD deposits. The substitution of neutral COD ligands against CO groups further increased the volatility of the precursor. PECVD experiments with unambiguously characterized Ir compounds (single crystal X-ray diffraction analysis) demonstrated their suitability for an atom-efficient (high molecule-to-precursor yield) gas phase deposition of amorphous iridium oxide (IrOx) phases. Thin films of IrOx were well suited as electrocatalyst in oxygen evolution reaction so that an efficient coupled system in combination with solar cells is viable to perform water-splitting reaction without external bias.

Antimicrobial Nanostructured Coatings: A Gas Phase Deposition and Magnetron Sputtering Perspective

Counteracting the spreading of multi-drug-resistant pathogens, taking place through surface-mediated cross-contamination, is amongst the higher priorities in public health policies. For these reason an appropriate design of antimicrobial nanostructured coatings may allow to exploit different antimicrobial mechanisms pathways, to be specifically activated by tailoring the coatings composition and morphology. Furthermore, their mechanical properties are of the utmost importance in view of the antimicrobial surface durability. Indeed, the coating properties might be tuned differently according to the specific synthesis method. The present review focuses on nanoparticle based bactericidal coatings obtained via magneton-spattering and supersonic cluster beam deposition. The bacteria–NP interaction mechanisms are first reviewed, thus making clear the requirements that a nanoparticle-based film should meet in order to serve as a bactericidal coating. Paradigmatic examples of coatings, obtained by magnetron sputtering and supersonic cluster beam deposition, are discussed. The emphasis is on widening the bactericidal spectrum so as to be effective both against gram-positive and gram-negative bacteria, while ensuring a good adhesion to a variety of substrates and mechanical durability. It is discussed how this goal may be achieved combining different elements into the coating.

Metal-organic framework UiO-66 membranes

Metal-organic frameworks (MOFs) have emerged as a class of promising membrane materials. UiO-66 is a prototypical and stable MOF material with a number of analogues. In this article, we review five approaches for fabricating UiO-66 polycrystalline membranes including in situ synthesis, secondary synthesis, biphase synthesis, gas-phase deposition and electrochemical deposition, as well as their applications in gas separation, pervaporation, nanofiltration and ion separation. On this basis, we propose possible methods for scalable synthesis of UiO-66 membranes and their potential separation applications in the future.