Stable films of zinc-hexacyanoferrate: electrochemistry and ion insertion capabilities

A stable film of zinc hexacyanoferrate is deposited on a GC (glassy carbon) substrate following a specific electrochemical protocol. The electrode maintains its characteristic even after dry and wet processes. SEM characterization confirms the cubic morphology of the materials and the IR suggests the presence of the FeII-C-N-ZnII structural unit. The electrochemical characterization indicates a very good stability of the film, thus opening application in ion exchange system. The focus is on monovalent, divalent, and trivalent ions. These results, the zinc low toxicity, and cost make zinc hexacyanoferrate films a promising candidate for many electrochemical applications.

Novel Solid-State Potentiometric Sensors Using Polyaniline (PANI) as A Solid-Contact Transducer for Flucarbazone Herbicide Assessment

Novel potentiometric solid-contact ion-selective electrodes (SC/ISEs) based on molecularly imprinted polymers (MIPs) as sensory carriers (MIP/PANI/ISE) were prepared and characterized as potentiometric sensors for flucarbazone herbicide anion. However, aliquat S 336 was also studied as a charged carrier in the fabrication of Aliquat/PANI/ISEs for flucarbazone monitoring. The polyaniline (PANI) film was inserted between the ion-sensing membrane (ISM) and the electronic conductor glassy carbon substrate (GC). The sensors showed a noticeable response towards flucarbazone anions with slopes of −45.5 ± 1.3 (r2 = 0.9998) and −56.3 ± 1.5 (r2 = 0.9977) mV/decade over the range of 10−2–10−5, 10−2–10−4 M and detection limits of 5.8 × 10−6 and 8.5 × 10−6 M for MIP/PANI/ISE and Aliguat/PANI/ISE, respectively. The selectivity and long-term potential stability of all presented ISEs were investigated. The short-term potential and electrode capacitances were studied and evaluated using chronopotentiometry and electrochemical impedance spectrometry (EIS). The proposed ISEs were introduced for the direct measurement of flucarbazone herbicide in different soil samples sprayed with flucarbazone herbicide. The results agree well with the results obtained using the standard liquid chromatographic method (HPLC).

Formation of niobium oxides by electrolysis from acidic aqueous solutions on glassy carbon

In this study niobium oxide films were formed without peroxo-precursors from three different mixed acidic aqueous solutions on glassy carbon. Linear sweep voltammetry and potential step were techniques used for electrochemical experiments. The simultaneous and consecutive electrochemical reduction of water, nitrate and sulphate ions provided an alkaline environment with oxygen in the near vicinity of the working cathode, which in combination with the present niobium ions, produced niobium oxides and/or oxyhydroxides on the glassy carbon substrate. The formed deposits were analyzed using scanning electron microscopy and energy dispersive spectroscopy and appear to consist of NbO, NbO2 and Nb2O5. Both the niobium and acid concentration of the electrolytes used influenced the morphology and particle size of the deposits. The formation of niobium-fluoride and hydrogen-niobiumoxide complexes is addressed.

A Molecularly Imprinted Electrochemical Gas Sensor to Sense Butylated Hydroxytoluene in Air

Alzheimer’s disease (AD) is a neurodegenerative disease, which affects millions of people worldwide. Curing this disease has not gained much success so far. Exhaled breath gas analysis offers an inexpensive, noninvasive, and immediate method for detecting a large number of diseases, including AD. In this paper, a new method is proposed to detect butylated hydroxytoluene (BHT) in the air, which is one of the chemicals found in the breath print of AD patients. A three-layer sensor was formed through deposition of a thin layer of graphene onto a glassy carbon substrate. Selective binding of the analyte was facilitated by electrochemically initiated polymerization of a solution containing the desired target molecule. Subsequent polymerization and removal of the analyte yielded a layer of polypyrrole, a conductive polymer, on top of the sensor containing molecularly imprinted cavities selective for the target molecule. Two sets of sensors have been developed. First, the graphene sensor has been fabricated with a layer of reduced graphene oxide (RGO) and tested over 5–100 part per million (ppm). For the second batch, Prussian blue was added to graphene before polymerization, mainly for enhancing the electrochemical properties. The sensor was tested over 0.02-1 parts per billion (ppb) level of concentration while the sensor resistance has been monitored.

Polyaniline-Supported Bacterial Biofilms as Active Matrices for Platinum Nanoparticles: Enhancement of Electroreduction of Carbon Dioxide

A hybrid matrix composed of a porous polyaniline underlayer, a robust bacterial biofilm and a multiwalled carbon nanotube overlayer has been demonstrated to function as highly active support for dispersed Pt catalytic nanoparticles during the electroreduction of carbon dioxide in neutral medium (phosphate buffer at pH 6.1). In contrast with bare Pt nanoparticles (deposited at a glassy carbon substrate), application of the hybrid system produces sizeable CO2-reduction currents in comparison to those originating from hydrogen evolution. The result is consistent with an enhancement in the reduction of carbon dioxide. However, the biofilm-based matrix tends to inhibit the catalytic properties of platinum towards proton discharge (competitive reaction) or even oxygen reduction. The hydrated structure permits easy unimpeded flow of aqueous electrolyte at the electrocatalytic interface. Although application of the polyaniline underlayer can be interpreted in terms of stabilization and improvement of the biofilm adherence, the use of carbon nanotubes facilitates electron transfer to Pt catalytic sites. It is apparent from the voltammetric stripping-type analytical experiments that, although formation of some methanol and methanoic acid cannot be excluded, carbon monoxide seems to be the main CO2-reduction product.