Effect of inoculum size and antibiotics on bacterial traveling bands in a thin microchannel defined by optical adhesive

Phenotypic diversity in bacterial flagella-induced motility leads to complex collective swimming patterns, appearing as traveling bands with transient locally enhanced cell densities. Traveling bands are known to be a bacterial chemotactic response to self-generated nutrient gradients during growth in resource-limited microenvironments. In this work, we studied different parameters of Escherichia coli (E. coli) collective migration, in particular the quantity of bacteria introduced initially in a microfluidic chip (inoculum size) and their exposure to antibiotics (ampicillin, ciprofloxacin, and gentamicin). We developed a hybrid polymer-glass chip with an intermediate optical adhesive layer featuring the microfluidic channel, enabling high-content imaging of the migration dynamics in a single bacterial layer, i.e., bacteria are confined in a quasi-2D space that is fully observable with a high-magnification microscope objective. On-chip bacterial motility and traveling band analysis was performed based on individual bacterial trajectories by means of custom-developed algorithms. Quantifications of swimming speed, tumble bias and effective diffusion properties allowed the assessment of phenotypic heterogeneity, resulting in variations in transient cell density distributions and swimming performance. We found that incubation of isogeneic E. coli with different inoculum sizes eventually generated different swimming phenotype distributions. Interestingly, incubation with antimicrobials promoted bacterial chemotaxis in specific cases, despite growth inhibition. Moreover, E. coli filamentation in the presence of antibiotics was assessed, and the impact on motility was evaluated. We propose that the observation of traveling bands can be explored as an alternative for fast antimicrobial susceptibility testing.

Highly efficient, heat dissipating, stretchable organic light-emitting diodes based on a MoO3/Au/MoO3 electrode with encapsulation

Stretchable organic light-emitting diodes are ubiquitous in the rapidly developing wearable display technology. However, low efficiency and poor mechanical stability inhibit their commercial applications owing to the restrictions generated by strain. Here, we demonstrate the exceptional performance of a transparent (molybdenum-trioxide/gold/molybdenum-trioxide) electrode for buckled, twistable, and geometrically stretchable organic light-emitting diodes under 2-dimensional random area strain with invariant color coordinates. The devices are fabricated on a thin optical-adhesive/elastomer with a small mechanical bending strain and water-proofed by optical-adhesive encapsulation in a sandwiched structure. The heat dissipation mechanism of the thin optical-adhesive substrate, thin elastomer-based devices or silicon dioxide nanoparticles reduces triplet-triplet annihilation, providing consistent performance at high exciton density, compared with thick elastomer and a glass substrate. The performance is enhanced by the nanoparticles in the optical-adhesive for light out-coupling and improved heat dissipation. A high current efficiency of ~82.4 cd/A and an external quantum efficiency of ~22.3% are achieved with minimum efficiency roll-off.

Durable Soft Mold for Imprinting of High-Adhesive Resin

A variety of polymer resins have been used to fabricate micro/nano structures via imprint lithography. In addition, with an interest in productivity, there is an increasing demand for the study of the process of easily demolding a cured resin from a mold for continuous fabrication of micro/nanostructures applying imprint lithography to the roll-type equipment. Among these polymer resins, Norland optical adhesive (NOA) in particular is widely used to fabricate micro/nano structure-based functional surfaces because of its shape memory characteristics, biocompatibility, and great optical characteristics. However, the cured NOA is originally used as an epoxy-based adhesive with its high adhesion. NOA has many advantages as a UV-curable adhesive, but as a resin in the imprint process, such adhesion brings a limitation. This high adhesion of cured NOA causes defects in the mold during the demolding process, so it is difficult to apply it to the continuous fabrication process. Here, we present a durable polyurethane acrylate (PUA) soft mold capable of clean demolding of an epoxy-based polymer resin having high adhesion by depositing metal on a surface. Au and Ni were deposited to a thickness of 100 Å by using an E-beam evaporator. To verify the surface characteristics, each metal-deposited soft mold was compared with the previously used soft mold by measuring the contact angle and calculating surface energy. To test a performance of our soft mold, we imprinted nanoline pattern with NOA as a resin using metal-deposited soft mold in roll to roll (R2R) process for more than 240 replications for 90 min of operation time. It is expected that this study can be used for mass production of pattern with epoxy-based patterns required in many fields.

Fabrication of Highly Stable Fully-Inorganic Halide Perovskite Films for Optoelectronic Application

Despite the fact that stability is a critical issue affecting halide perovskite after the materials have been developed, these materials continue to be studied due to their outstanding optoelectronic characteristics such as narrow emission band width, high PLQY. Many methods are suggested and improved, but the limitations for the display and lighting applications are still remaining. Here, we propose the fabrication of stable cesium lead tri-halide (CsPbX3; X= Cl, Br, I) perovskite films using photocurable polyurethane material, norland optical adhesive 63 (NOA 63), to generate white LEDs by placing films on the InGaN 450 nm blue chip. Comparing with the conventional perovskites, fabricated films well maintained the luminescence properties such as full widths at half maximum (FWHM) of 18 nm and 31 nm for green and red films, respectively. For the stability issue, pristine perovskite without encapsulation is decomposed immediately at high humidity and temperature, but NOA 63 encapsulated perovskite maintained a PL emission property of 60% after four hours in artificial atmosphere. The CIE color triangle reached ~119% of the NTSC standard, exhibiting high color purity. From the results, we confirm that the NOA 63 encapsulated halide perovskites are beneficial when applied in optoelectronic applications due to their improved stability and maintained characteristics.

Effect of Low-Pressure Plasma Treatment Parameters on Wrinkle Features

Wrinkles attract significant attention due to their ability to enhance the mechanical and optical characteristics of various optoelectronic devices. We report the effect of the plasma gas type, power, flow rate, and treatment time on the wrinkle features. When an optical adhesive was treated using a low-pressure plasma of oxygen, argon, and nitrogen, the oxygen and argon plasma generated wrinkles with the lowest and highest wavelengths, respectively. The increase in the power of the nitrogen and oxygen plasma increased the wavelengths and heights of the wrinkles; however, the increase in the power of the argon plasma increased the wavelengths and decreased the heights of the wrinkles. Argon molecules are heavier and smaller than nitrogen and oxygen molecules that have similar weights and sizes; moreover, the argon plasma comprises positive ions while the oxygen and nitrogen plasma comprise negative ions. This resulted in differences in the wrinkle features. It was concluded that a combination of different plasma gases could achieve exclusive control over either the wavelength or the height and allow a thorough analysis of the correlation between the wrinkle features and the characteristics of the electronic devices.