Reflective and transmissive cross-polarization converter for terahertz wave in a switchable metamaterial

Utilizing the phase transition characteristic of vanadium dioxide, we present a metamaterial configuration to achieve both reflective and transmissive cross-polarization converters. When vanadium dioxide is metal, the design behaves as a reflective cross-polarization converter. It consists of metallic grating, topas spacer, and vanadium dioxide film. Polarization conversion ratio is more than 90% in the frequency range from 4.80 THz to 13.13 THz. When vanadium dioxide is insulator, the design behaves as a transmissive cross-polarization converter using cascaded metallic gratings with rotation angle . High-efficiency broadband cross-polarization wave conversion is achieved in the frequency band of 0.50-4.75 THz. The effects of oblique incidence on reflective and transmissive modes are studied on polarization conversion. The results tell that cross-polarization conversion is better when incident angle is in the range of -. The designed metamaterial may have a certain inspiration for the research of terahertz multifunctional polarization converter.

­­­­A THZ Tunable Metamaterial Reflective Polarization Converter Based Vanadium Oxide Film

In this paper a simple and tunable reflective polarization converter has been investigated numerically based on metamaterial which composes of a two-corner-cut square patch resonator with a slit embedded into Vanadium dioxide film (VO2) and reflective ground layer. All the results obtained by the CST Microwave Studio show that the polarization conversion ratio (PCR) above 90% is achieved from 2.22-5.42THz at the temperature about 25°C under the linearly and circularly polarized wave incidence normally. In addition, the influences on electromagnetic polarization properties have been demonstrated with the insulator-to-metal phase transition of the Vanadium dioxide film (VO2) film by the method of varying the temperature. At the same time, to be demonstrated, the physical mechanism of changeable polarization conversion has been discussed by the distributions of current densities. According to the results, the designed metamaterial could be applied in the area of temperature-controlled sensing, THz wireless communication, tunable polarized devices.

Casimir-Polder Interaction of an Atom with a Cavity Wall Made of Phase-Change Material out of Thermal Equilibrium

We consider the out-of-thermal-equilibrium Casimir-Polder interaction between atoms of He*, Na, Cs, and Rb and a cavity wall made of sapphire coated with a vanadium dioxide film which undergoes the dielectric-to-metal phase transition with increasing wall temperature. Numerical computations of the Casimir-Polder force and its gradient as the functions of atom-wall separation and wall temperature are made when the latter exceeds the temperature of the environment. The obtained results are compared with those in experiment on measuring the gradient of the Casimir-Polder force between 87Rb atoms and a silica glass wall out of thermal equilibrium. It is shown that the use of phase-change wall material significantly increases the force magnitude and especially the force gradient, as opposed to the case of a dielectric wall.

A versatile photodetector assisted by photovoltaic and bolometric effects

The advent of low-dimensional materials with peculiar structure and superb band properties provides a new canonical form for the development of photodetectors. However, the limited exploitation of basic properties makes it difficult for devices to stand out. Here, we demonstrate a hybrid heterostructure with ultrathin vanadium dioxide film and molybdenum ditelluride nanoflake. Vanadium dioxide is a classical semiconductor with a narrow bandgap, a high temperature coefficient of resistance, and phase transformation. Molybdenum ditelluride, a typical two-dimensional material, is often used to construct optoelectronic devices. The heterostructure can realize three different functional modes: (i) the p–n junction exhibits ultrasensitive detection (450 nm–2 μm) with a dark current down to 0.2 pA and a response time of 17 μs, (ii) the Schottky junction works stably under extreme conditions such as a high temperature of 400 K, and (iii) the bolometer shows ultrabroad spectrum detection exceeding 10 μm. The flexible switching between the three modes makes the heterostructure a potential candidate for next-generation photodetectors from visible to longwave infrared radiation (LWIR). This type of photodetector combines versatile detection modes, shedding light on the hybrid application of novel and traditional materials, and is a prototype of advanced optoelectronic devices.