An octa-band planar monopole antenna for portable communication devices

Due to the rapid development of wireless communication systems, good numbers of services and devices use different frequency bands and protocols. To concurrently cover all these services, the antenna in communication devices should operate over multiple frequency bands. The use of wide and multi-band antennas not only reduces the number of antennas necessary to cover multiple frequency bands but also lessens the system complexity, size, and costs. To operate over eight frequency bands to cover sixteen well-established narrow service bands, a planar monopole antenna is proposed for portable communication devices. The proposed antenna is comprised of an inverted F-shaped monopole patch with a rotated L-shaped strip and an F-shaped ground strip with a rotated L-shaped branch. The studied antenna can excite at multiple resonant modes which helps it to achieve eight measured operating bands of 789–921 MHz, 1367–1651 MHz, 1995–2360 MHz, 2968–3374 MHz, 3546–3707, 4091–4405 MHz, 4519–5062 MHz and 5355–6000 MHz. The achieved measured operating bands can cover sixteen popular narrow service bands for 4G/3G/2G, MWT, WiFi, WiMAX, WLAN, and sub-6 GHz 5G wireless communication system. The studied antenna achieved good gain, efficiency and exhibits stable radiation characteristics. Moreover, the antenna does not use any lumped element and left ample space for other circuitries which makes it easier to use in portable devices such as tablets, laptops, etc. with low manufacturing cost.

Compact 3D USB dongle monopole antenna for mobile wireless communication bands

Three-dimensional compact volume internal antenna for universal serial bus (USB) dongle that covers hexa operating bands is proposed in this paper. The volume of the proposed USB dongle is 15×20×4 mm3; it is based on two connected monopoles, one of them is semi-circular monopole ended by three unit cells of meander-line and the other is a bent monopole with four unit cells of high-impedance wire. The proposed antenna is realized on a printed circuit board to reduce the fabrication costs. The coupling between the antenna elements broadens the operating bandwidth, which includes most of the wireless commercial service bands, GSM850/GSM900/UMTS/GSM1800/GSM1900/WCDMA2100/802.11b/g/LTE2600 (824–2690 MHz) as well as 802.11a/n (5150–5825 MHz). The antenna's simulated and experimental results are in good agreement.

Compact Printed Antenna for Mobile Phone

A small-size printed antenna is proposed for the application of mobile phones. The antennacomprisesan outer strip, an inner strip, and a common section.It not only occupies a compact area of 25 × 20 mm² butalsosupports two wide bandswithinthe resonantmodes. Prototypes of the antenna had been constructed and experimentally verified. The measured results of the antenna show the bandwidth cover the existing service bands of GSM/DCS/PCS/UMTS within 6 dB return loss specification, and also have good radiation patterns and antenna gains.This antenna is well suitable to be used for mobile phone application.