A sample-to-answer electrochemical biosensor system for biomarker detection

We interfaced with a painless blood collection device and integrated on-chip blood-to-plasma separation with an electronic bead-based biomarker detection assay to enable true sample-to-answer detection of biomarkers.

High-Performance Passive Plasma Separation on OSTE Pillar Forest

Plasma separation is of high interest for lateral flow tests using whole blood as sample liquids. Here, we built a passive microfluidic device for plasma separation with high performance. This device was made by blood filtration membrane and off-stoichiometry thiol–ene (OSTE) pillar forest. OSTE pillar forest was fabricated by double replica moldings of a laser-cut polymethylmethacrylate (PMMA) mold, which has a uniform microstructure. This device utilized a filtration membrane to separate plasma from whole blood samples and used hydrophilic OSTE pillar forest as the capillary pump to propel the plasma. The device can be used to separate blood plasma with high purity for later use in lateral flow tests. The device can process 45 μL of whole blood in 72 s and achieves a plasma separation yield as high as 60.0%. The protein recovery rate of separated plasma is 85.5%, which is on par with state-of-the-art technologies. This device can be further developed into lateral flow tests for biomarker detection in whole blood.

Engineered Membranes for Residual Cell Trapping on Microfluidic Blood Plasma Separation Systems. A Comparison between Porous and Nanofibrous Membranes

Blood-based clinical diagnostics require challenging limit-of-detection for low abundance, circulating molecules in plasma. Micro-scale blood plasma separation (BPS) has achieved remarkable results in terms of plasma yield or purity, but rarely achieving both at the same time. Here, we proposed the first use of electrospun polylactic-acid (PLA) membranes as filters to remove residual cell population from continuous hydrodynamic-BPS devices. The membranes hydrophilicity was improved by adopting a wet chemistry approach via surface aminolysis as demonstrated through Fourier Transform Infrared Spectroscopy and Water Contact Angle analysis. The usability of PLA-membranes was assessed through degradation measurements at extreme pH values. Plasma purity and hemolysis were evaluated on plasma samples with residual red blood cell content (1, 3, 5% hematocrit) corresponding to output from existing hydrodynamic BPS systems. Commercially available membranes for BPS were used as benchmark. Results highlighted that the electrospun membranes are suitable for downstream residual cell removal from blood, permitting the collection of up to 2 mL of pure and low-hemolyzed plasma. Fluorometric DNA quantification revealed that electrospun membranes did not significantly affect the concentration of circulating DNA. PLA-based electrospun membranes can be combined with hydrodynamic BPS in order to achieve high volume plasma separation at over 99% plasma purity.

Blood Plasma Self-Separation Technologies during the Self-Driven Flow in Microfluidic Platforms

Blood plasma is the most commonly used biofluid in disease diagnostic and biomedical analysis due to it contains various biomarkers. The majority of the blood plasma separation is still handled with centrifugation, which is off-chip and time-consuming. Therefore, in the Lab-on-a-chip (LOC) field, an effective microfluidic blood plasma separation platform attracts researchers’ attention globally. Blood plasma self-separation technologies are usually divided into two categories: active self-separation and passive self-separation. Passive self-separation technologies, in contrast with active self-separation, only rely on microchannel geometry, microfluidic phenomena and hydrodynamic forces. Passive self-separation devices are driven by the capillary flow, which is generated due to the characteristics of the surface of the channel and its interaction with the fluid. Comparing to the active plasma separation techniques, passive plasma separation methods are more considered in the microfluidic platform, owing to their ease of fabrication, portable, user-friendly features. We propose an extensive review of mechanisms of passive self-separation technologies and enumerate some experimental details and devices to exploit these effects. The performances, limitations and challenges of these technologies and devices are also compared and discussed.

Design and Analysis of Microchannel for Plasma Separation from Blood

Microchannel device is important and having great use in field of biological research. The micro channels having some advantages like reduction in the sample processing time, consumption of costly reagents and sample volumes. The current work for microchannel is based on the Zwiefach- fung bifurcation law which used to study for separation process. The microchannel based plasma separation is far better and rapid than conventional plasma separation techniques like centrifugation, filtration. Microchannel flow simulation is carried out using CFD software. The analysis is done for different type channel with combination of various sets of different shape and size of obstacles placed along the channel walls. For this analysis we used computational fluid dynamic tool known as COMSOL MULTIPHYSICS 5.0, to study different configurations on pressure and velocity drop. Also, the effect of geometry, cross sectional area are studied. While analysis different obstacles placed along the channel like rectangular, semicircle and triangular are used. The analysis is done for each shape obstacle and observation are recorded while analysis it is observed of that pressure is decreases with increase in number of obstacles.