Molecular Dynamics Simulation on Cutting Mechanism in the Hybrid Machining Process of Single-Crystal Silicon

In this paper, molecular dynamics simulations are carried out to investigate the cutting mechanism during the hybrid machining process combined the thermal and vibration assistants. A modified cutting model is applied to study the material removal behavior and subsurface damage formation in one vibration cycle. The results indicate that during the hybrid machining process, the dominant material removal mechanism could transform from extrusion to shearing in a single vibration cycle. With an increase of the cutting temperature, the generation and propagation of cracks are effectively suppressed while the swelling appears when the dominant material removal mechanism becomes shearing. The formation mechanism of the subsurface damage in one vibration cycle can be distinct according to the stress distribution. Moreover, the generation of the vacancies in workpiece becomes apparent with increasing temperature, which is an important phenomenon in hybrid machining process.

Optimization of turn-milling process in roughing and finishing regimes: Trade-off between productivity, cutting force and surface integrity

Turn-milling is a hybrid machining process which used benefits of interrupted cutting for proceeding of round bars. However, number of controllable parameters in the hybrid process is numerous that makes optimizing the process complicated. In the present study, an optimization work has been proposed to investigate the trade-off between production rate and cutting force in roughing regime as well surface roughness and tensile residual stress in finishing regime. Number of 43 experiments based on response surface methodology was designed and carried out to gather required data for development of quadratic empirical models. Then, the adequacy and importance of process factors were analyzed using analysis of variances. Finally, desirability function was used to optimize the process in rough and finish machining regimes. The obtained results showed that selection of eccentricity and cutter speed at their maximum working range can effectively enhance the quality characteristics in both the roughing and finishing regimes.