From apex to shoreline: fluvio-deltaic architecture for the Holocene Rhine–Meuse delta, the Netherlands

Despite extensive research on alluvial architecture, there is still a pressing need for data from modern fluvio-deltaic environments. Previous research in the fluvial-dominated proximal and central Rhine–Meuse delta (the Netherlands) has yielded clear spatial trends in alluvial architecture. In this paper, we include the backwater length to establish architectural trends from apex to shoreline. Channel-belt sand body width / thickness ratios and interconnectedness were determined, and the proportions of fluvial channel-belt deposits, fluvial overbank deposits, organics and intertidal deposits were calculated for the complete fluvio-deltaic wedge based on high-resolution geological cross sections. It was found that the average width / thickness ratio of channel-belt sand bodies in the proximal delta is 5 times higher than in the distal delta. Other down-valley trends include an 80 % decrease in the channel deposit proportion (CDP) and a near-constant proportion of overbank deposits. Additionally, interconnectedness in the proximal delta is 3 times higher than in the distal delta. Based on the Rhine–Meuse dataset, we propose a linear empirical function to model the spatial variability of CDP. It is argued that this relationship is driven by four key factors: channel lateral-migration rate, channel-belt longevity, creation of accommodation space and inherited floodplain width. Additionally, it is established that the sensitivity of CDP to changes in the ratio between channel-belt sand body width and floodplain width (normalized channel-belt sand body width) varies spatially and is greatest in the central and distal delta. Furthermore, the proportion of fluvial channel-belt sands is generally an appropriate proxy for the total sand content of fluvio-deltaic successions, although its suitability as a total sand indicator rapidly fades in the distal delta. Characteristics of the backwater zone of the Rhine–Meuse delta are (1) sand body width / thickness ratios that are lower as a consequence of channel narrowing (not deepening), (2) a rapid increase and then a drop in the organic proportion, (3) an increase in the total sand proportion towards the shoreline, and (4) a drop in the connectedness ratio. For this paper, unique high-resolution quantitative data and spatial trends of the alluvial architecture are presented for an entire delta, providing data that can be used to further improve existing fluvial stratigraphy models.

Some of the geological challenges and opportunities associated with the dynamics of the Cenozoic East African Rift System

The Cenozoic East African Rift System (EARS) is the largest continental rift valley system on Earth. Extending over a total distance of approximately 4,500 km, and with an average width of about 50 km, it is home to some of East Africa's largest urban populations and some of its most important transport, energy and water supply infrastructure. Rifting commenced during the Early Miocene and crustal extension has continued to the present day, posing seismic and volcanic hazards throughout its history of human occupation. Deep-seated landslides also present significant challenges for public safety, land management and infrastructure development on the flanks of rift margins. The rift floor itself poses a range of geohazards to community livelihood and engineering infrastructure, including ground fissuring and cavity collapse, flooding and sedimentation. On the positive side, the development of the EARS has created hydrocarbon and geothermal energy resources, and geomaterials for use as aggregates and cement substitutes in road and building construction. Optimising the use of these resources requires careful planning to ensure sustainability, while land use management and infrastructure development must take full consideration of the hazards posed by the ground and the fragility and dynamism of the human and physical environment.

Analysis of tympanic sinus shape for purposes of intraoperative hearing monitoring: a microCT study

Purpose Sinus tympani is the space in the retrotympanum, with variable morphology. Computed tomography is a common tool to investigate sinus tympani anatomy. During cochlear implantation or tympanoplasty, electrocochleography can be used for hearing monitoring. In such a surgical strategy the electrode is placed in the round window’s region throughout posterior tympanotomy. Common accessible needle-shaped electrodes using is difficult in achieving intraoperative stabilization. The aim of the study is to assess the dimensions and shape of sinus tympani, basing on the micro computed tomography scans for purposes of establishing the possible new electrocochleography electrode shape. Materials and methods Sixteen fresh frozen cadaveric temporal bones were dissected. MicroCT measurements included the depth and the width of sinus tympani, width of facial canal with stapedius muscle chamber. Obtained data were analyzed statistically with the use of RStudio 1.3.959 software. Results The highest average width of sinus tympani amounted for 2.68 mm, depth measured at the round window plane for 3.19 mm. Width of facial canal with stapedius muscle chamber highest average values at the round window plane- 3.32 mm. The lowest average minimum and maximum values were calculated at the 1 mm above the round window plane. The highest average posterior tympanotomy width was 2.91 mm. Conclusions The shape of the tympanic sinus is like a trough with the narrowest and deepest dimensions in the middle part. The ST shape and dimensions should be taken into account in constructing the ECochG electrode, designed for optimal placement through posterior tympanotomy approach.

Short-Term Photovoltaic Power Interval Prediction Based on the Improved Generalized Error Mixture Distribution and Wavelet Packet -LSSVM

The periodicity and non-stationary nature of photovoltaic (PV) output power make the point prediction result contain very little information, increase the difficulty of describing the prediction uncertainty, and it is difficult to ensure the most efficient operation of the power system. Effectively predicting the PV power range will greatly improve the economics and stability of the grid. Therefore, this paper proposes an improved generalized based on the combination of wavelet packet (WP) and least squares support vector machine (LSSVM) to obtain higher accuracy point prediction results. The error mixed distribution function is used to fit the probability distribution of the prediction error, and the probability prediction is performed to obtain the prediction interval. The coverage rate and average width of the prediction interval are used as indicators to evaluate the prediction results of the interval. By comparing with the results of conventional methods based on normal distribution, at 95 and 90% confidence levels, the method proposed in this paper achieves higher coverage while reducing the average bandwidth by 5.238 and 3.756%, which verifies the effectiveness of the proposed probability interval prediction method.

Radial Width of the Lateral Meniscus at the Popliteal Hiatus: Relevance to Saucerization of Discoid Lateral Menisci

Background: A discoid lateral meniscus (DLM) is a congenital anomaly of the knee in which the lateral meniscus has an “O” shape and contains irregular, abnormal collagenous tissue. A DLM can cause mechanical symptoms and pain. Treatment of a symptomatic DLM is arthroscopic saucerization to reshape the meniscus to a more normal contour. Enough tissue must be removed to eliminate mechanical symptoms but not too much to create instability. The residual width of the meniscus is crucial at the popliteus hiatus because here the peripheral rim is unattached at the capsule. Reports in the literature recommend a residual width of 6 to 8 mm. Purpose/Hypothesis: The purpose of this research was to determine the width of the lateral meniscus at the popliteal hiatus in normal specimens. Our null hypothesis was that a residual width of 6 to 8 mm will be sufficient to approximate normal anatomy. Study Design: Cross-sectional study; Level of evidence, 3. Methods: We made direct measurements of the radial width of the lateral meniscus from the outer rim at the popliteal hiatus to the inner edge in 19 specimens (age, 2-120 months.) We measured one 4-year-old specimen with a bilateral complete DLM. We also measured 39 digital images of specimens (age, 1-132 months) using ImageJ. Finally, we made direct arthroscopic measurements of 8 skeletally mature specimens. Results: The average width of specimens <3 years old was 5.5 mm. The average width of the 10-year-old specimens was 12 mm. The average width of the skeletally mature specimens was 16 mm. A 4-year-old DLM specimen measured 19 mm. Conclusion: We rejected our null hypothesis. Direct measurements suggest that a residual width of 6 to 8 mm is insufficient for children ≥8 years old. A width of at least a full centimeter approximates the normal for 8-year-olds and at least 15 mm for adolescents.

Investigation on Aesthetic and Water Permeability of Surface Protective Material under Accelerated Weathering

In this paper, experiments were conducted on the effects of aesthetic and durability of three representative surface protective material under accelerated weathering test for 5000 h. First, the adaptability of the surface protective material coating to the substrate was proven by examining the aesthetic properties and the water permeability of the building materials. Second, the pollutant resistance of the surface protective material coating to artificial stain was assessed using xenon-arc light. The result shows that the appearance of the silane types did not change significantly, and the water permeability was improved. In addition, the silicate types did not improve water permeability and the surface color was changed. Fluor- resin types effectively improved the water permeability, but the surface color became dark. Sample measurements showed changes in the average width of the contamination after weathering, with an increase after spray cleaning and ultrasonic cleaning. However, it was observed that after washing the pollution average width of all specimens due to weathering at 5000 h was almost as much or smaller than the initial value.

Comparison of maxillary sinus on radiograph among males and females

Background: An obstacle in forensic odontology is an incomplete body caused by post-mortem damage. The problem can be solved by using lateral cephalometric radiographs for victim identification. Sex determination can be performed on the maxillary sinus, which is the largest among the paranasal sinuses. Purpose: This study aims to analyse the maxillary sinuses’ width and height on lateral cephalometric radiographs among male and female subjects. Methods: The study samples were 60 lateral cephalometric radiographs (30 males and 30 females) between the ages of 20 and 40, with complete permanent dentition (or third molar absence). The height and the width of maxillary sinus measurement were performed using measurement tools of EzDent-i Vatech Software. Results: The average width of the maxillary sinus on males was 40.60 ± 1.56 mm, and the height was 35.02 ± 2.09 mm, while the width and the height on females were 36.93 ± 1.30 mm and 29.72 ± 1.76 mm, respectively. The independent t-test reveals a significant difference (p<0.05) between males and females, both in the maxillary sinus’s width and height on the lateral cephalometric radiograph. Conclusion: The maxillary sinus in males is larger than in females, it opening up possibilities for disaster victim identification.

Surgical and Radiological Anatomy of the Medial Patellofemoral Ligament: A Magnetic Resonance Imaging and Cadaveric Study

The purpose of this study was to compare the measurement of several anatomical features of the medial patellofemoral ligament (MPFL) between magnetic resonance imaging (MRI) and by direct fashion during dissection. We hypothesized that the measurements between these two techniques would agree. MRI of 30 fresh-frozen cadaveric knees was followed by dissection. MPFL patella and femoral attachment were evaluated; their shape, length, and width were measured; and measurements were compared. MRI was deemed unreliable for the determination of several of the aforementioned anatomical features. Important findings include: (a) observations on MPFL attachment at medial patella side and attachment to quadriceps were identical between dissection and MRI; (b) average width at patella insertion was significantly different between the two methods (p = 0.002); and (c) an attachment to the quadriceps tendon was present in 20/30 specimens and d. detailed measurements of a thin, non-linear, and three-dimensional structure, such as the MPFL, cannot be performed on MRI, due to technical difficulties. This anatomical radiological study highlights the shape, anatomical measurements (length and width), and attachment of the MPFL using a relatively large cadaveric sample and suggests that MRI is not reliable for detailed imaging of its three-dimensional anatomy.

Effect of Temperature on the Daily Increment Deposition in the Otoliths of European Sardine Sardina pilchardus (Walbaum, 1792) Larvae

Otolith microstructure analysis is a valuable tool to evaluate the relationship between larval age and growth and how it relates to environmental variability. Otolith growth and daily increment deposition were analyzed in sardine (Sardina pilchardus) larvae reared in the laboratory under different temperatures (13, 15, and 17 °C), with a diet rich in microalgae, rotifers, and copepods Acartia grani. The number and width of growth increments, first-check and otolith diameter were determined in the otoliths and then related to larval age and total length. At hatching, the sagittal otoliths consisted of a lenticular core with a diameter of 10.56 μm (±1.07 μm SD). Somatic growth increased with the increasing temperature and the growth rate of larvae reared at 13 and 15 °C was significantly lower than for larvae reared at 17 °C. At 17 °C, otoliths exhibited a higher diameter with wider increments than at 13 °C. There was a high variability of increment counts-at-age for larvae reared within the same temperature treatment. The increase of growth increments with larval size was higher for larvae reared at 17 °C until 35 days post-hatching than those growing at 15 °C. Scanning electronic microscopy confirmed that increments are deposited daily, with an average width smaller than 1 µm and as low as 0.33 μm, therefore impossible to distinguish using light microscopy. At colder temperatures, larval otoliths had thinner and less marked increments and lower growth rates, which can lead to incorrect age determinations. The effect of temperature on the otolith microstructure can help in identifying strong temperature gradients experienced by wild sardine larvae.

Separation of Rare-Earth Ions from Mine Wastewater Using B12S Nanoflakes as a Capacitive Deionization Electrode Material

In this study, nanoflakes of B12S were fabricated by plasma-assisted reaction of sulfur dichloride in an ionic liquid at room temperature using europium boride as a hard template. The nanoflakes had an average width and thickness of about 3 1urn and 9.6 nm, respectively, and a large specific surface area of 1197.2 m2 g 1. They behaved like typical electric double-layer capacitors with a capacitance of 201.2 F g 1 at 0.2 mA cm 2 During capacitive deionization to recover rare-earth ions, the nanoflakes had higher adsorption selectivity for Sm3+ than for other competing ions present in real mine waste water. This is due to the strong interaction of the electron-concentered S-groups (S’’’) of the nanoflakes with S m3+. This provides an alternative to construct efficient systems to specifically remove Sm3+ from aqueous solution using B12S nanoflakes. This process demonstrates that other boron sulfide compounds can be used to recover valuable ions by capacitive deionization.